Analysis of the Effect of Pressure and Air Flowrate Variation on Pneumatic Air Cylinder Speed Using the Pneumatic Software Application
Analisa Pengaruh Variasi Tekanan dan Laju Aliran Udara pada Kecepatan Air Cylinder Pneumatik dengan Menggunakan Aplikasi Software Pneumatik
DOI:
https://doi.org/10.21070/ups.6600Keywords:
Pneumatic, ; air cylinder, flowrate, pressureAbstract
The air cylinder is an important component in a pneumatic-based automation machine, where the speed of the air cylinder greatly influences the performance of a machine. For this reason, it is necessary to carry out careful planning and pay attention to factors that can influence the performance of an air cylinder. In this research, a test was carried out to determine the effect of the pressure and air flowrate used on the air cylinder speed using the Festo Fluidism application. From the results of the tests carried out, it shows that the size of the pressure and air flowrate used have an effect on the speed of the air cylinder. Tests also show that increasing the air flowrate will provide a higher increase in speed than increasing the air pressure.
Downloads
References
Saeful Bahri and Chairul Anwar, “ Perancangan dan Prototype Automatis Mesin Single Bore dengan Motor AC 1 Fasa Berbasis Pengontrolan Pneumatik dan PLC,” J. eLEKTUM, vol. 14, no. 2, pp. 13–20, 2017, doi: 10.24853/elektum.14.2.13-20.
H. T. Anaam K I and P. A. Y. W. Pranata R Y, Abdillah h, “Pengaruh Trend Otomasi Dalam Dunia Manufaktur dan Industri,” Vocat. Educ. Natl. Semin., vol. 1, no. 1, pp. 46–50, 2022.
R. Kurniawan, “Rekayasa rancang bangun sistem pemindahan material otomatis dengan sistem elektro-pneumatik,” J. Ilm. Tek. Mesin CAKRAM, vol. 2, no. 1, pp. 42–47, 2022.
M. A. Marzuqi, “Analisis Gerakan Cylinderdouble Acting,” Anal. Gerak. Cylind. Act. pada alat Peraga Elektro Pneum., 2021.
J. V. Tuapetel and R. Narwalutama, “Perencanaan Sistem Pneumatik Sebagai Penggerak pada Pintu Gerbong Kereta,” STRING (Satuan Tulisan Ris. dan Inov. Teknol., vol. 6, no. 3, p. 244, 2022, doi: 10.30998/string.v6i3.10536.
K. B. Ismoyo, Pengaruh Variasi Tekanan Udara Dan Jarak Limit Switch Terhadap Kecepatan Dan Gaya Dorong Cylinder Pneumatik Model MA 20x200. Sidoarjo, 2020.
T. Margono, A. Gamayel, M. Zaenudin, and R. Ariyansah, “PERANCANGAN DAN PABRIKASI MESIN PEMOTONG MATERIAL PLASTIK SEDOTAN DENGAN AIR CYLINDER BERBASIS PLC OMRON SYSMAC CP1E,” vol. 3, no. 1, pp. 28–38, 2023.
A. Panjaitan, M. Harahap, and S. A. Syaputra, “RANCANG BANGUN DAN SIMULASI SISTEM PNEUMATIK DENGAN 1 SILINDER SEBAGAI MEDIA PEMBELAJARAN,” vol. 2, no. 2, pp. 38–45, 2021.
A. A. Prasetyo, “Rancang Bangun Simulator Lift Pengirim Barang Dengan Pneumatik,” pp. 1–77, 2016.
A. D. Sevtian, F. A. Kurniawan, and M. Arifin, “Pemograman Sistem Pada Mesin Filling Bottle PLC Dengan Menggunakan Penggerak Pneumatik Dan Intelegensi Sensor,” vol. 3, no. 2, pp. 11–17, 2022.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
