Quality Control in Processed Milkfish Production Using the Seven Tools Method and FMEA
Pengendalian Kualitas pada Produksi Olahan Ikan Bandeng Menggunakan Metode Seven tools dan FMEA
DOI:
https://doi.org/10.21070/ups.6269Keywords:
Milkfish, Seven Tools, Failure Mode Effect AnalysisAbstract
Milkfish, a highly nutritious freshwater fish, is processed by Bunda Foods into various products, from fresh to frozen fish. By 2023, defects have increased from 15% to 23% of total production of 100 pcs. The study aims to identify the most common defects in processed milkfish production and determine the highest Risk Priority Number (RPN) value. The Seven Tools method and Failure Mode Effect Analysis (FMEA) are used in this research. The findings suggest that the most common defect was unfresh fish (143 occurrences) and the highest RPN value was for off-taste (224 occurrences). Both defects were attributed to worker error, highlighting the need for supervision, standard operating procedures, and additional training.
Downloads
References
P. Prayoto, J. P. Nugraha, B. P. Waluyo, H. Hamdani, B. Priono, and S. Wartini, “Analisis Saluran Dan Margin Pemasaran Ikan Bandeng Di Kecamatan Sedati Kabupaten Sidoarjo Jawa Timur,” Chanos Chanos, vol. 20, no. 1, p. 227, 2022, doi: 10.15578/chanos.v20i1.10662.
M. A. Nasrulloh, “Pengembangan Potensi Wilayah Tambak Kabupaten Sidoarjo Sebagai Produk Unggulan Daerah,” no. November, pp. 1–5, 2020.
D. N. Mutmainah et al., “Penentuan Potensi Tambak Bandeng Di Kabupaten Sidoarjo Menggunakan Analytical Hierrarchy Process,” J. Pertan. Cemara, vol. 20, no. 2, pp. 9–18, 2023, doi: 10.24929/fp.v20i2.3032.
Akhmad Wasiur Rizqi and Moh Jufriyanto, “Manajemen Risiko Rantai Pasok Ikan Bandeng Kelompok Tani Tambak Bungkak dengan Integrasi Metode Analytic Network Process (ANP) dan Failure Mode and Effect Analysis (FMEA),” J. Sist. Tek. Ind., vol. 22, no. 2, pp. 88–107, 2020, doi: 10.32734/jsti.v22i2.3949.
I. Pendahuluan, “Procedia of Engineering and Life Science Vol . 4 June 2023 Seminar Nasional & Call Paper Fakultas Sains dan Teknologi ( SENASAINS 6 th ) Quality Control of Tofu Production Processes Using the Seven Tools Method Pengendalian Kualitas Proses Produksi Tahu D,” vol. 4, no. June, 2023.
M. Basori, “A nalisis Pengendalian Kualitas Cetakan P ackaging D engan Metode F ailure Mode and Effect Analysis ( FMEA ),” pp. 158–163, 2019.
S. F. Zahari and C. Ahmad, “Analisis Pengendalian Kualitas Produk Celana di Pt. Alpina Menggunakan Peta Kendali dan FMEA,” Pros. Ind. Eng. Natl. Conf., pp. 200–206, 2020.
A. S. Putri, “Rework Dengan Metode Fmea Pada Intimates Wear Product,” vol. 4, no. 1, pp. 15–23, 2023.
W. Safitri and D. M. Fahreza, “Jurnal Pelita Manajemen Analisis Product Defect dengan Metode Seven Tools dan FMEA Jurnal Pelita Manajemen Pendahuluan,” J. Pelita Manaj., vol. 02, no. 01, pp. 1–12, 2023.
V. Kartikasari and H. Romadhon, “Analisa Pengendalian dan Perbaikan Kualitas Proses Pengalengan Ikan Tuna Menggunakan Metode Failure Mode And Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) Studi kasus di PT XXX Jawa Timur,” J. Ind. View, vol. 1, no. 1, pp. 1–10, 2019, doi: 10.26905/jiv.v1i1.2999.
A. Wicaksono and F. Yuamita, “Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 3, pp. 145–154, 2022, doi: 10.55826/tmit.v1iiii.44.
R. Y. Prasetya, S. Suhermanto, and M. Muryanto, “Implementasi FMEA dalam Menganalisis Risiko Kegagalan Proses Produksi Berdasarkan RPN,” Performa Media Ilm. Tek. Ind., vol. 20, no. 2, p. 133, 2021, doi: 10.20961/performa.20.2.52219.
A. Khatammi and A. R. Wasiur, “Analisis Kecacatan Produk Pada Hasil Pengelasan Dengan Menggunakan Metode FMEA (Failure Mode Effect Analysis),” J. Serambi Eng., vol. 7, no. 2, pp. 2922–2928, 2022, doi: 10.32672/jse.v7i2.3853.
B. Salah, M. Alnahhal, and M. Ali, “Risk prioritization using a modified FMEA analysis in industry 4.0,” J. Eng. Res., vol. 11, no. 4, pp. 460–468, 2023, doi: 10.1016/j.jer.2023.07.001.
A. F. Aufa, S. S. Dahda, and U. M. Gresik, “ANALISIS RISIKO PROSES BONGKAR MUAT CURAH KERING DENGAN MENGGUNAKAN METODE FMEA (FAILURE MODE AND EFFECT ANALYSIS) DI PT XYZ,” J. Inf. Technol. Comput. Sci., vol. 6, pp. 592–598, 2023.
D. Kristanto and M. Husyairi, “Analisis Titik Kritis Halal Pada Proses Produksi Kerupuk Di Jenius Snack Pleret Bantul Menggunakan Failure Mode and Effect Analisis (Fmea),” Pros. Konf. Integr. Interkoneksi Islam Dan Sains, vol. 4, no. 1, pp. 76–79, 2022.
T. Zakaria, A. Dyah Juniarti, D. Bima, and S. Budi, “Analisis Pengendalian Kualitas Cacat Dimensi Pada Header Boiler Menggunakan Metode Fmea Dan Fta,” J. InTent, vol. 6, no. 1, pp. 24–36, 2023.
M. J. Firmansyah and M. Nuruddin, “Analisis Pengendalian Kualitas Produksi Pada PT . XYZ Menggunakan Metode Seven Tools Dan FMEA,” SITEKIN J. Sains, Teknol. dan Ind., vol. 20, no. 1, pp. 231–238, 2022.
A. S. M. Absa and S. Suseno, “Analisis Pengendalian Kualitas Produk Eq Spacing Dengan Metode Statistic Quality Control (SQC) Dan Failure Mode And Effects Analysis (FMEA) Pada PT. Sinar Semesta,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 3, pp. 183–201, 2022, doi: 10.55826/tmit.v1iiii.51.
P. S. K. Hanifah and I. Iftadi, “Penerapan Metode Six Sigma dan Failure Mode Effect Analysis untuk Perbaikan Pengendalian Kualitas Produksi Gula,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 8, no. 2, pp. 90–98, 2022, doi: 10.30656/intech.v8i2.4655.
A. Anshari, W. Wahyudin, and D. Herwanto, “Penerapan Good Manufacturing Practices ( GMP ) pada Pengendalian Kualitas Pangan Produk Nugget Ayam Tempe di UMKM Haiyuu Indonesia,” SITEKIN J. Sains, Teknol. dan Ind., vol. 20, no. 1, pp. 138–146, 2022.
A. Anastasya and F. Yuamita, “Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) di PDAM Tirta Sembada,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. I, pp. 15–21, 2022, doi: 10.55826/tmit.v1ii.4.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
