Optimizing Using Ground Power Units in Aircraft Maintenance Activities at PT. IAA AMO with FMEA Method
Optimalisasi Penggunaan Ground Power Unit pada Kegiatan Perawatan Pesawat Udara di PT. IAA AMO dengan Metode FMEA
DOI:
https://doi.org/10.21070/ups.6152Keywords:
Optimalisasi, Failure Mode And Effect Analysis (FMEA), RPN, MTBF, MTTFAbstract
IAA AMO is a manufacturing industry engaged in aircraft maintenance. The problem faced is the reliability of the GPU machine which is low at 86%, this can cause an increase in the company's operational costs. This research uses the Failure Mode and Effect Analysis (FMEA) method which is used as a reference for identifying the causes of damage and the effects resulting from the damage by determining the critical value of the component, namely the largest Risk Priority Number (RPN). Apart from that, the Mean Time To Failure (MTTF) and Mean Time Between Failure (MTBF) of these components are calculated to minimize the occurrence of breakdwn and downtime. The aim of this research is to optimize the use of GPUs in aircraft maintenance to minimize breakdowns by using the FMEA method.
Downloads
References
H. A. P. L. Hestuningrum and E. Ahyudanari, “Jurnal Perhubungan Udara Manajemen Kendaraan Ground Handling di Terminal 1 Bandara Internasional Ground Handling Vehicle Management at International Juanda Airport Terminal 1,” vol. 9066, pp. 99–106, 2019.
Y. T. P. Ferry Setiawan1*, Dhimas Wicaksono2, “Perencanaan Jadwal dan Aktivitas Pemeliharaan Auxiliary Power Unit (APU) Pesawat Boeing 737-500 Dengan Metode Reliability,” Pros. Semin. Nas. Sains Teknol. dan Inov. Indones. p-ISSN 2086-5805 Akad. Angkatan Udar., vol. 3, no. November, pp. 24–25, 2021, doi: 10.54706/senastindo.v3.2021.130.
I. PRAESITA, J. Alhilman, and N. Nopendri, “Penilaian Kinerja Berbasis Reliability Pada Continuous Casting Machine 3 (CCM 3) Pt Krakatau Steel (Persero) Tbk Menggunakan Metode Reliability Availability Maintainability dan Cost of Unreliability,” J. Rekayasa Sist. Ind., vol. 3, no. 04, p. 1, 2016, doi: 10.25124/jrsi.v3i04.271.
B. Çekyay and S. Özekici, “Reliability, MTTF and steady-state availability analysis of systems with exponential lifetimes,” Appl. Math. Model., vol. 39, no. 1, pp. 284–296, 2015, doi: 10.1016/j.apm.2014.05.029.
N. B. Puspitasari and A. Martanto, “PENGGUNAAN FMEA DALAM MENGIDENTIFIKASI RESIKO KEGAGALAN PROSES PRODUKSI SARUNG ATM (ALAT TENUN MESIN) (STUDI KASUS PT. ASAPUTEX JAYA TEGAL),” J@TI UNDIP J. Tek. Ind., vol. 9, no. 2, pp. 93–98, 2014, doi: 10.12777/jati.9.2.93-98.
I. S. Muthalib, M. Rusman, and G. L. Griseldis, “Overall Equipment Effectiveness (OEE) analysis and Failure Mode and Effect Analysis (FMEA) on Packer Machines for minimizing the Six Big Losses-A cement industry case,” IOP Conf. Ser. Mater. Sci. Eng., vol. 885, no. 1, 2020, doi: 10.1088/1757-899X/885/1/012061.
C. Spreafico, D. Russo, and C. Rizzi, “A state-of-the-art review of FMEA/FMECA including patents,” Comput. Sci. Rev., vol. 25, pp. 19–28, 2017, doi: 10.1016/j.cosrev.2017.05.002.
S. M. Sulaman, A. Beer, M. Felderer, and M. Höst, “Comparison of the FMEA and STPA safety analysis methods–a case study,” Softw. Qual. J., vol. 27, no. 1, pp. 349–387, 2019, doi: 10.1007/s11219-017-9396-0.
C. S. Bangun, A. Jalil, D. Amperajaya, and R. Rasjidin, “Preventive Maintenance Scheduling with Age Replacement Method at CNG Station,” APTISI Trans. Technopreneursh., vol. 4, no. 2, pp. 153–163, 2022, doi: 10.34306/att.v4i2.260.
H. D. W. Shinta, R. Yanti, and Qurtubi, “Analisis Perawatan Mesin dengan Metode Reliability Centered Maintenance(RCM) terhadapMesinAir Jet Loom(AJL),” 2021. [Online]. Available: https://idec.ft.uns.ac.id/wp-content/uploads/IDEC2021/PROSIDING/LSP/ID004.pdf
A. W. Daseno, A. Komari, and H. B. Santoso, “Perencanaan Pengelolaan Limbah Kaca Grafir Menjadi Produk Inovasi Baru Guna Menambah Pendapatan Perusahaan (Sudi Kasus Pada UD. Pelangi Art Glass),” JURMATIS (Jurnal Manaj. Teknol. dan Tek. Ind., vol. 3, no. 1, p. 24, 2021, doi: 10.30737/jurmatis.v3i1.1403.
I. S. Wawan Setiawan, Noveicalistus H Djanggu, “PENENTUAN FREKUENSI PERAWATAN TERMURAH PADA MESIN KRITIS DI PT CITRA MAHKOTA Wawan,” Integr. Ind. Eng. Manag. Syst., vol. 6, no. 1, pp. 25–37, 2022.
N. F. Fatma, H. Ponda, and R. A. Kuswara, “Analisis Preventive Maintenance Dengan Metode Menghitung Mean Time Between Failure (Mtbf) Dan Mean Time To Repair (Mttr) (Studi Kasus Pt. Gajah Tunggal Tbk),” Heuristic, vol. 17, no. 2, pp. 87–94, 2020, doi: 10.30996/heuristic.v17i2.4648.
P. Alavian, Y. Eun, K. Liu, S. M. Meerkov, and L. Zhang, “ScienceDirect Evaluation MTTR : ∗ Induced Effect on Machine Efficiency,” IFAC Pap., vol. 52, no. 13, pp. 1004–1009, 2019, [Online]. Available: https://doi.org/10.1016/j.ifacol.2019.11.326
A. H. Maryono, “Application of preventive maintenance methods on boilers at PT XYZ,” Turkish J. Comput. Math. Educ., vol. 12, no. 14, pp. 5528–5543, 2021.
J. T. Industri, “PERBAIKAN KUALITAS PRODUK KERATON LUXURY DI PT. X DENGAN MENGGUNAKAN METODE FAILURE MODE and EFFECT ANALYSIS (FMEA) dan FAULT TREE ANALYSIS (FTA) * RICHMA YULINDA HANIF, HENDANG SETYO RUKMI, SUSY SUSANTY,” J. Online Inst. Teknol. Nas. Juli, 2015.
B. A. Nainggolan and L. M. C. Wulandari, “Analisis Risiko Operasional Menggunakan Metode FMEA di CV. Gamarends Marine Supply Surabaya,” Pros. Semin. Nas. Ris. dan Teknol. Terap. 2021, no. 2020, pp. 1–13, 2021, [Online]. Available: https://journal.unpar.ac.id/index.php/ritektra/article/view/4988
A. Basuki and I. Chusnayaini, “Identifikasi Resiko Kegagalan Proses Penyebab Terjadinya Cacat Produk dengan Metode FMEA-SAW,” Matrik, vol. 22, no. 1, p. 37, 2021, doi: 10.30587/matrik.v22i1.1967.
B. J. C. Adek Suherman1, “Pengendalian Kualitas Dengan Metode Failure Mode Effect And Analysis (FMEA) Dan Pendekatan Kaizen untuk Mengurangi Jumlah Kecacatan dan Penyebabnya Adek,” 2019.
P. I. D, SISTEM DAN MANAJEMEN PEMELIHARAAN. YOGYAKARTA: DEEPUBLISH, 2019.
R. N. Afifah, M. Yustiana Lubis, and Y. Nugrahaini Safrudin, “Perancangan Autolamp pada Mesin Cutting untuk Meminimasi Produk Cacat Menggunakan Metode QFD di CV. XYZ,” JATI UNIK J. Ilm. Tek. dan Manaj. Ind., vol. 6, no. 2, pp. 1–13, 2023, doi: 10.30737/jatiunik.v6i2.3315.
H. W. Lo, J. J. H. Liou, C. N. Huang, and Y. C. Chuang, “A novel failure mode and effect analysis model for machine tool risk analysis,” Reliab. Eng. Syst. Saf., vol. 183, pp. 173–183, 2019, doi: 10.1016/j.ress.2018.11.018.
A. Z. Muttaqin and Y. A. Kusuma, “Analisis Failure Mode And Effect Analysis Proyek X Di Kota Madiun,” JATI UNIK J. Ilm. Tek. dan Manaj. Ind., vol. 1, no. 2, pp. 81–96, 2018, doi: 10.30737/jatiunik.v1i2.118.
M. A. Z. Ramadhan and T. Sukmono, “Penentuan Interval Waktu Preventive Maintenance Pada Nail Making Machine Dengan Menggunakan Metode Reliability Centered Maintenance (RCM) II,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 2, no. 2, pp. 49–57, 2018, doi: 10.21070/prozima.v2i2.1349.
N. M. Hidayatulloh and T. Sukmono, “Determination of Production Instrumentation Equipment Maintenance Intervals In the Paper Industry,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 4, no. 1, pp. 23–31, 2021, doi: 10.21070/prozima.v4i1.1275.
M. H. Aiman and M. Nuruddin, “Analisis Kecacatan Produk Pada Mesin Pemotongan Dengan Menggunakan Metode FMEA di UD. Abdi Rakyat,” J. Tek. Ind., vol. 9, no. 2, pp. 578–587, 2023.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
