Planning the Manufacturing Process of a Potato Cutting Machine into Stick Shapes Driven by an Electric Motor
Perencanaan Proses Manufaktur Mesin Pemotong Kentang Menjadi Bentuk Stik dengan Penggerak Motor Listrik
DOI:
https://doi.org/10.21070/ups.5472Keywords:
Manufacturing, Planning, Potato Stick Cutting MachineAbstract
Manufacturing engineering encompasses product design, production processes, and production system management, integrating industrial engineering and mechanical engineering. Product design and manufacturing processes are adopted from engineering mechanics, while system management originates from industrial engineering. This research focuses on determining the machining processes to maintain product quality and the production costs for a potato cutter machine, limited to the planning stage with new equipment and machining time calculations. The research aims to plan the appropriate machining processes and determine the necessary production coast. The methods used involve collecting theories and data from books, articles, and proceedings. The research results indicate that the potato cutter machine consists of a frame, electric motor, gearbox, pulley, and cutting blade, each with specific functions. The total material cost for manufacturing this machine is Rp 2,518,500, with a production cost of Rp 3,453,125 per unit.
Downloads
References
P. N. Lhokseumawe, K. Pengantar, rahayu deny danar dan alvi furwanti Alwie, A. B. Prasetio, and R. Andespa, “Tugas Akhir Tugas Akhir,” J. Ekon. Vol. 18, Nomor 1 Maret201, vol. 2, no. 1, pp. 41–49, 2020.
E. Supriyanto, ““Manufaktur “Dalam Dunia Teknik Industri,” J. Ind. Elektro dan Penerbangan, vol. 3, no. 3, p. 1, 2013.
I. Wahyudi, “Tugas Akhir Rancang Bangun Mesin Pengaduk ( Mixer ) Bahan Olah Daging Bakso Diajukan Sebagai Salah Satu Syarat Meraih Gelar Sarjana Strata Satu ( S1 ) pada Fakultas Teknologi Industri Jurusan Teknik Mesin Fakultas Teknologi Industri,” 2007.
D. Hinestroza, “Kirkuk University Journal for Humanities Studies, vol. 7, pp. 1–25, 2018.
S. K. Sularso, Dasar Perencanaan dan Pemilihan Elemen Mesin, cetakan Kesebelas, Jakarta, PT. 1997.
A. R. Muwafiq and M. Mulyadi, “Rancang Bangun Holder Face Mill dengan Insert Pahat HSS,” Innov. Technol. Methodical Res. J., vol. 1, no. 1, pp. 1–12, 2024, doi: 10.47134/innovative.v1i1.84.
Rengga Elga Nadhirza, “Perancangan Alat Pengaduk Adonan Bakery Menggunakan Motor DC 1 / 2 HP diajukan guna melengkapi tugas akhir dan memenuhi syarat-syarat untuk menyelesaikan Program Studi Teknik Elektro ( S1 ) dan mencapai gelar Sarjan,” 2012.
Juminingsih, “Covariance Structure Analysis of Health-Related Indicators in Elderly People Living at Home with a Focus on Subjective Health Perception,” vol. II, pp. 1–15, 2015.
Sularso and K. Suga, “Dasar Perencanaan dan Pemilihan Elemen Mesin,” p. 5, 2004.
D. A. Prayuda, A. Z. Muttaqin, and S. Mulyadi, Perencanaan Transmisi Sabuk V Dan Pulley Pada Pembangkit Listrik Tenaga Mikrohidro. 2014.
H. Syarif, L. Purnamawati, and P. N. Jakarta, “Politeknik Negeri Jakarta Menggunakan,” pp. 126–134, 2022.
F. Faujiyah, “Perancangan Pengembangan Rangka Pada Mesin Pengaduk Adonan Pangsit Labu,” J. TEDC, vol. 15, no. 2, 2021.
I. D. Kurniati et al., Buku Ajar Teknologi Pengelasan. 2015.
E. Widodo and R. Dwi Jayanto, “The Manufacturing Planning of Installation Series-Parallel Combination Centrifugal Pump Testing Equipment,” R.E.M. (Rekayasa Energi Manufaktur) J., vol. 6, no. 1, pp. 33–40, 2021, doi: 10.21070/r.e.m.v6i1.1547.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
