Identifying Danger Risks in the Pan Production Process Using the Hazard Identification (HAZID) Method
Identifikasi Resiko Bahaya pada Proses Produksi Loyang Menggunakan Metode Hazard Identification (HAZID)
DOI:
https://doi.org/10.21070/ups.5090Keywords:
HAZID, Danger Risk, Baking ProductionAbstract
UD. Usaha Jaya is a company that produces baking pans made from aluminum plates. UD. Jaya's business can produce around 700 baking pans in various shapes per day. This research aims to analyze and identify hazards during the baking pan production process. This provides an alternative, namely making UD. Usaha Jaya can produce baking pan products while still paying attention to safety aspects and risk levels. The HAZID method consists of, firstly identifying hazards at work stations, secondly determining the likelihood and severity scale for each work station, thirdly determining risk control measures for activities at work stations that have a high risk level. The results of the research are the risk level of each work station. And the highest risk level is at the cutting process work station, namely 5 work accident risks which are categorized into 3 risks, namely low risk, 1 medium risk, and 1 high risk.
Downloads
References
Ahmad and Muslimah, “Memahami Teknik Pengolahan dan Analisis Data Kualitatif,” 2021.
E. Kurnia Sari, F. Marisa Irwayu, M. Rachmawati, dan Faizatul Amimah, and H. Murnawan, “Program Studi Teknik Industri, Universitas 17 Agustus 1945 Surabaya,” Menur Pumpungan, Kec. Sukolilo. 2023.
S. Indragiri and T. Yuttya, “Manajemen Risiko K3 Menggunakan Hazard Identification Risk Assessment and Risk Control (Hirarc),” J. Kesehat., vol. 9, no. 1, pp. 1080–1094, 2020.
R. Ahmad Fathur, P. Boy Isma, “Analisis Risiko Keselamatan Dan Kesehatan Kerja ( K3 ) Pada Proses Produksi Beton Dengan Metode Jsa Dan Hirarc Di Pt Varia Usaha Beton”.
G. L. Pradana, F. Handoko, and H. G. W, “Pengendalian Risiko Kecelakaan Kerja Dengan Pendekatan Hazard Identification , Risk Assesment , and Risk Control ( Hirarc ) ( Studi Kasus Ud . Tohu Srijaya , Batu - Jawa Timur ),” J. Valtech (Jurnal Mhs. Tek. Ind., vol. 5, no. 2, pp. 10–18, 2022.
E. Susanto, V. Damayanti, I. Samuel, and H. Bramley, “Penerapan Keselamatan Kerja dan Kesehatan Kerja Melalui Manajemen Sekuriti Terhadap Produkivitas Pada PT. Epson,” J. Ilm. Wahana Pendidik., vol. 9, no. 13, pp. 217–224, 2023.
A. Jaelani, “张维海 1* , 解学军 2 1.,” Anal. RISIKO KECELAKAAN KERJA PADA PROSES PRODUKSI PENGECORAN LOGAM DENGAN Metod. JOB Saf. Anal. (JSA HAZARD Identif. RISK ASSESMENT Stud. KASUS CV ANDHY KARYA, vol. 3, no. 1, p. 2024.
J. Y. Choi and S. H. Byeon, “Hazop methodology based on the health, safety, and environment engineering,” Int. J. Environ. Res. Public Health, vol. 17, no. 9, May 2020.
I. D. Santoso and Lukmandono, “Minimalisasi Risiko Kecelakaan Kerja Dengan Menggunakan Pendekatan Hira Dan Hazop,” Semin. Nas. Sains dan Teknol. Terap. IX 2021, vol. 9, no. 1, pp. 22–28, 2021.
R. Cornedi Navenata and I. Masrofah, “Seminar dan Konferensi Nasional IDEC 2020,” 2020.
Putu Sugih, S. Dewa Gede, et al., MANAJEMEN RISIKO. 2021.
W. Muka and A. Wibowo, “Penerapan Manajemen Risiko ... (I Wayan Muka, Agung Wibowo) PENERAPAN MANAJEMEN RISIKO PADA PROSES PENGEMBANGAN PROPERTI Implementation of Risk Management on Property Development Process.” 2021.
Darmayani Satya, Sa'diyah Aminatus, et al., KESEHATAN KESELAMATAN KERJA (K3). 2023.
T. Ihsan, S. A. Hamidi, and F. A. Putri, “Penilaian Risiko dengan Metode HIRADC Pada Pekerjaan Konstruksi Gedung Kebudayaan Sumatera Barat,” J. Civronlit Unbari, vol. 5, no. 2, p. 67, 2020.
F. Dwi Arista, S. T. Salmia, T. Priyasmanu, Program, and S. T. Industri, “IDENTIFIKASI POTENSI BAHAYA DAN MENGURANGI RISIKO KECELAKAAN KERJA MENGGUNAKAN HAZARD IDENTIFICATION RISK ASSESSMENT AND RISK CONTROL,” J. Mhs. Tek. Ind., vol. 5, no. 2, 2022.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
