Preprint has been published in a journal as an article
Preprint / Version 1

Proposed Improvement to the Steel Material Warehouse Using Class Based Storage Method


Usulan Perbaikan Tata Letak Gudang Material Besi Menggunakan Metode Class Based Storage

##article.authors##

  • Mike Vidiasari Universitas Muhammadiyah Sidoarjo
  • Atikha Sidhi Cahyana Universitas Muhammadiyah Sidoarjo

DOI:

https://doi.org/10.21070/ups.5065

Keywords:

Class Based Storage; Dedicated Storage; Layout; Warehouse

Abstract

PT BMI has an iron storage warehouse located in front of the production area. The problem faced is that material is stored randomly.
The impact from a technical perspective is the operator need estimate 60 minutes to find required materials. That caused waste time and energy and can reduce productivity about 42%. Meanwhile, from an administrative perspective, material report is not in accordance that leads delay in material procurement. The aim of this research is to provide warehouse layout suggestion to produce an optimal layout. This research uses a class-based storage method to determine material classification. After re-arrange the layout, known that proposed layout reach efficiency about 28,4% due to reducing the storage area approximate ​​76,22 m2, from 268,64 m2 to 192,42 m2. Materials were stored on shelfs, it consist 16 shelfs for storing Class A, 11 shelfs for storing Class B and 5 shelfs for storing Class C.

Downloads

Download data is not yet available.

References

M. Ali, “Manajemen Industri,” 2018.

Rosihin, Ma’arij, D. Cahyadi, dan Supriyadi “Analisa Perbaikan Tata Letak Gudang Coil Dengan Metode Class Based Storage,” Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 7, no. 2, hlm. 166-172, Des 2021, doi: http://dx.doi.org/10.30656/intech.v7i2.4036.

I. Saidatuningtyas, dan W. N. Primadhani, “Racking System Dengan Kebijakan Class based storage Di Gudang Timur PT Industri Kereta Api (INKA) Persero,” Jurnal Logistik Bisnis, vol. 11, no. 01, hlm. 37-42, Mei 2021. [Daring]. Tersedia pada: https://ejurnal.poltekpos.ac.id/index.php/logistik/index.

R. Hidayatulloh, dan A. S. Cahyana, “Upaya Peningkatan Produktivitas dengan Meminimasi Waste Menggunakan From To Chart (FTC),” PROZIMA (Productivity, Optimization and Manufacturing System Engineering), vol. 1, no.2, hlm. 107-115, Des 2022, doi: 10.21070/prozima.v1i2.1289.

Y. Muharni, Ade. Irman, dan Y. Noviansyah, “Perancangan Tata Letak Gudang Barang Jadi Menggunakan Kebijakan Class-Based Storage Dan Particle Swarm Optimization Di PT. XYZ,” Jurnal Teknik Industri, vol. 10, no. 3, hlm. 200-209, Okt 2020.

F. W. Abdul, dan M. R. Ramadhan, “Analisis Pengaruh Layout Penyimpanan Bahan Baku terhadap First In First Out Berdasarkan Hasil Jajak Pendapat Karyawan (Studi pada PT Indofood CBP Sukses Makmur TBK Divisi Packaging Purwakarta),” Jurnal Logistik Indonesia, vol. 4, no.2, hlm. 114-126, Okt 2020.

R. E. Hidayat, dan B. I. Putra, "Re-Layout Tata Letak Gudang Material Menggunakan Metode Dedicated Storage Pada Gudang PT. ABC," PROZIMA (Productivity, Optimization and Manufacturing System Engineering), vol. 3, no. 2, pp. 55-61, hlm. 55-61, Des 2019, doi: http://doi.org/10.21070/prozima.v3i2.1270.

M. Rauf, dan M. R. Radyanto, “Perbaikan Kinerja Gudang melalui Penataan Ulang Tata Letak Gudang Suku Cadang Menggunakan Metode Class based storage di PT. DN Semarang,” JIEOM (Journal of Industrial Engineering and Operator Management), vol. 5, no. 2, hlm. 111-121, Nov 2022. [Daring]. Tersedia pada: https://ojs.uniska-bjm.ac.id/index.php/jieom/index.

L. N. Sari, dan D. Sonia, “Perhitungan Kebutuhan Rak Penyimpanan Dokumen Rekam Medis Di Ruang Filing Rsia Hu Mana Prima Bandung Tahun 2021,” Jurnal Ilmiah Indonesia, vol.1, no. 8, hlm. 1004-1012, Jul 2021. [Daring]. Tersedia pada: http://cerdika.publikasiindonesia.id/index.php/cerdika/index.

A. I. Bagaskara, F. A. A. P. Yudistira, M. A. Musyaffa, dan P. A. Fitriani, “Analisis Manajemen Stock Pergudangan di Perusahaan Distribusi Cirebon,” Jurnal Bisnis Manajemen dan Ekonomi, vol. 5, no. 2, hlm. 99-108, Apr 2024.

D. Aziz, dan R. Vikaliana, “Usulan Perbaikan Tata Letak Gudang Dengan Menggunakan Metode Class based storage di PT. Maju Kaya Rejeki,” Jurnal IKRAITH-TEKNOLOGI, vol. 7, no. 3, hlm. 57-66, Nov 2023, doi: https://doi.org/10/37817/ikraith-teknologi.v7i3

I. Noor, “Peningkatan Kapasitas Gudang dengan Re-Design Layout Menggunakan Metode Shared Storage,” Journal of Industrial Engineering and Operator Management (JIEOM), vol. 1, no. 1, hlm. 12-18, 2018.

I. Agustina, dan R. Vikaliana, “Analisis Pengaturan Layout Gudang Sparepart Menggunakan Metode Dedicated Storage di Gudang Bengkel Yamaha Era Motor,” Journal of Management and Business Review, vol 18, no. 2, hlm. 53-63, Jun 2021, doi: https://doi.org/10.34149/jmbr.v18i2.271.

P. S. Lubis, H. A. Dewi, dan E. Selvi, “Redesain Tata Letak Pabrik Gula dalam Meningkatkan Efesiensi dan Produktivitas CV. Rizki Abadi,” Jurnal Manajemen dan Sains, vol. 7, no. 1, hlm. 120-132, Apr 2022, doi: 10.33087/jmas.v7i1.342.

N. Fajri, “Usulan Perbaikan Kapasitas Gudang Pupuk dengan Metode Share Storage di PT. XYZ,” (JAIER) Journal of Agro-Industry Engineering Research, vol. 1, no. 7, hlm. 43-46, Jul 2022. [Daring]. Tersedia pada: https://journal.atim.ac.id/index.php/jaier.

S. Wignjosoebroto, “Tata Letak Pabrik dan Pemindahan Bahan,” 2009.

J. M. Apple, “Tata Letak Pabrik dan Pemindahan Barang,” 1990.

Downloads

Additional Files

Posted

2024-07-26

Categories

License

Copyright (c) 2024 UMSIDA Preprints Server

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.