Quality Control Analysis Of The Risk Of Paving Product Damage Using Six Sigma and Kaizen Methods
Analisis Quality Control Terhadap Risiko Kerusakan Produk Paving Dengan Menggunakan Metode Six Sigma Dan Kaizen
DOI:
https://doi.org/10.21070/ups.5019Keywords:
Quality Control, Six Sigma, Kaizen, PavingAbstract
PT Varia Usaha Beton experienced various problems the company standard for product defects was 0.1% of production each month. In January the defect was 0.3%, February the defect was 0.2%, March the defect was 0.5%, April the defect was 0.4%, May the defect was 0.2%, June the defect was 0.3%, July the defect was 0.4%, August the defect was 0.3%, September the defect was 0.4%, October the defect was 0.2%, November the defect was 0.4%, and December the defect was 0.2%. The purpose of this study is to determine the of the causes of paving product failure and determine the risk reduction strategy for damage to paving products. To conduct this research using six sigma and kaizen methods. Results showed the highest defect was in March 4859 out of 984275 and the lowest was in October 985 out of 552177. Types of defects: crack 9250, gupil 10040, porous 9961.
Downloads
References
N. Nurhayani, S. R. Putri, dan A. Darmawan, “Analisis Pengendalian Kualitas Produk Outsole Sepatu Casual menggunakan Metode Six Sigma DMAIC dan Kaizen 6S,” J. Tek. Ind., vol. 9, no. 1, hal. 248–258, 2023.
W. Kurniawan dan U. Pembangunan Nasional Veteran Jawa Timur Jl Rungkut Madya Surabaya, “Analisis Pengendalian Kualitas Produk Gula Menggunakan Metode Six Sigma di PT PG Candi Baru,” J. Tek. Mesin, Ind. Elektro dan Inform. (JTMEI, vol. 3, no. 1, hal. 110–125, 2024, [Daring]. Tersedia pada: https://doi.org/10.55606/jtmei.v3i1.
D. Levia dan Mhubaligh, “Analisis Proses Produksi CPO Untuk Mengidentifikasi Faktor-Faktor Yang Mempengaruhi Kualitas Mutu CPO,” J. Teknol. dan Manaj. Ind. Terap., vol. 2, no. 2, hal. 82–89, 2023, doi: 10.55826/tmit.v2i2.72.
I. S. Inggit Marodiyah, “ANALISA RISIKO GUNA PENINGKATAN KUALITAS PROSES PEMBANGUNAN GEDUNG BERTINGKAT Inggit Marodiyah 1) , Indung Sudarso 2),” 2020.
N. Hairiyah, “PENERAPAN SIX SIGMA DAN KAIZEN UNTUK MEMPERBAIKI KUALITAS ROTI DI UD. CJ BAKERY[Application of six sigma and kaizen to improve the bread quality In UD. CJ Bakery],” J. Teknol. Ind. Has. Pertan., vol. 25, no. 1, hal. 35, 2020, doi: 10.23960/jtihp.v25i1.35-43.
A. W. Susetyo, H. Supriyanto, dan J. T. Industri, “Six Sigma Dan Kaizen,” Semin. Nas. Teknol. Ind. Berkelanjutan II (SENASTITAN II), vol. 2, no. 2, hal. 392–400, 2022.
Aldi Adi Pratama dan Ahmad Chirzun, “Analisis Pengendalian Kualitas Dalam Meningkatkan Pelayanan Asuradur Kredit Usaha Rakyat Menggunakan Six Sigma,” J. Teknol. dan Manaj. Ind. Terap., vol. 2, no. 3, hal. 191–199, 2023, doi: 10.55826/tmit.v2i3.268.
H. C. Wahyuni, Buku Ajar Pengendalian Kualitas Industri Manufaktur Dan Jasa, 1 ed. Sidoarjo: UMSIDA Press, 2020. doi: 10.21070/2020/978-623-6833-79-7.
P. S. K. Hanifah dan I. Iftadi, “Penerapan Metode Six Sigma dan Failure Mode Effect Analysis untuk Perbaikan Pengendalian Kualitas Produksi Gula,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 8, no. 2, hal. 90–98, 2022, doi: 10.30656/intech.v8i2.4655.
S. Sarman dan D. Soediantono, “Literature Review of Lean Six Sigma (LSS) Implementation and Recommendations for Implementation in the Defense Industries,” J. Ind. Eng. & Manag. Res., vol. 3, no. 2, hal. 24–34, 2022.
A. Widodo dan D. Soediantono, “Manfaat Metode Six Sigma (DMAIC) dan UsulanPenerapan Pada Industri Pertahanan: A Literature Review,” Int. J. Soc. Manag. Stud., vol. 3, no. 3, hal. 1–12, 2022.
E. Sukirno, J. Prasetiyo, R. Rosma, dan M. H. R. S. R. Sari, “Implementasi Metode Six Sigma Dmaic Untuk Mengurangi Defect Pipe Exhaust Xe 611,” J. Apl. Ilmu Tek. Ind., vol. 2, no. 2, hal. 10, 2022, doi: 10.32585/japti.v2i2.1492.
Nofal Azhar Pratama, Marchimal Zulfian Dito, Otniel Odi Kurniawan, dan Ari Zaqi Al-Faritsy, “Analisis Pengendalian Kualitas Dengan Metode Seven Tools Dan Kaizen Dalam Upaya Mengurangi Tingkat Kecacatan Produk,” J. Teknol. dan Manaj. Ind. Terap., vol. 2, no. 2, hal. 53–62, 2023, doi: 10.55826/tmit.v2i1.111.
Z. Rohmah dan Y. Mahfud, “Pengaruh Budaya Kaizen, Disiplin Kerja Dan Kompetensi Terhadap Kinerja Pegawai Kantor Kementrian Agama Kabupaten Wonosobo,” J. Econ. Bus. Eng., vol. 3, no. 1, hal. 40–49, 2021, doi: 10.32500/jebe.v3i1.1994.
I. W. Rusdiana dan D. Soediantono, “Kaizen and Implementation Suggestion in the Defense Industry : A Literature Review Implementasi Kaizen dan Usulan Penerapannya Pada Industri Pertahanan : A Literature Review,” J. Tek. Ind. Manaj. Ris., vol. 3, no. 3, hal. 35–52, 2022.
A. R. Andriansyah dan W. Sulistyowati, “Clarisa Product Quality Control Using Methods Lean Six Sigma and Fmeca Method (Failure Mode And Effect Cricitality Analysis) (Case Study: Pt. Maspion Iii),” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 4, no. 1, hal. 47–56, 2021, doi: 10.21070/prozima.v4i1.1272.
M. Juliana dan B. Estavan Imanuel Sitanggang, “Analisis Pengendalian Kualitas Paving Menggunakan Metode Six Sigma Pada Cv Mtu. Analysis of Paving Quality Control Using the Six Sigma Method in Cv Mtu,” J. Ris. dan Apl. Tek. Ind., vol. 1, no. 3, hal. 16–21, 2023.
M. Suryono, Sumartini, dan R. Aisy, “Pengendalian Mutu Pada Produksi Tuna Loin Center Cut Beku Menggunakan Metode Six Sigma Di Perusahaan Pembekuan Tuna X,” Authentic Res. Glob. Fish. Appl. J. (Aurelia Journal), vol. 5, no. April, hal. 15–26, 2023.
K. Nabila dan R. Rochmoeljati, “Analisis Pengendalian Kualitas Menggunakan Metode Six Sigma Dan Perbaikan Dengan Kaizen,” Juminten, vol. 1, no. 1, hal. 116–127, 2020, doi: 10.33005/juminten.v1i1.27.
U. Perbaikan, U. Menurunkan, R. Pada, K. Upright, P. Pwh, dan T. Akhir, “Menggunakan Metode Six Sigma Dan Fmea (Failure Mode and Effect Analysis),” J. Sains Student Res., vol. 2, no. 1, hal. 583–590, 2024.
S. A. Pebrianti, S. H. Kusumah, dan N. Yunita, “Identifikasi Permasalahan Kualitas Garam Industri Di Pt Niaga Garamcemerlang Menggunakan Check Sheet, Pareto Chart Dan Fishbone Analysis,” J. Ilmu Tek. Ed. 2(3), 79-86., vol. 2, no. 3, hal. 79–86, 2021.
C. A. Z. Arifin dan F. N. Azizah, “Analisis Kecacatan Ban Vulkanisir Dengan Pengendalian Kualitas Metode Statistical Quality Control (Sqc) Pada Cv.Arm,” J. Ind. Eng. Oper. Manag., vol. 6, no. 1, hal. 110–123, 2023, doi: 10.31602/jieom.v6i1.11440.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
