Performance Analysis of 45-90 Degree Cutting Oriented Circular Saw Machines for Wood Industry Applications Experimental Study
Analisis Kinerja Mesin Circular Saw Berorientasi Potong 45-90 Derajat Untuk Aplikasi Industri Kayu Studi Eksperimental
DOI:
https://doi.org/10.21070/ups.4926Keywords:
Circular saw, performance analysis, surface roughness, cutting accuracyAbstract
This study analyzes the performance of a circular saw machine that can operate at angles between 45-90 degrees in the wood industry, using sengon, meranti, and teak wood. Parameters tested include cutting speed, cutting accuracy, and operational reliability, using a Surface Roughness Tester and a Digital Angle Ruler. Results show that sengon and meranti wood achieve the best smoothness at a 65-degree angle, while teak wood shows consistent smoothness. Cutting angle accuracy is excellent at all tested angles. The design and quality of the saw blade, as well as machine calibration, significantly affect cutting precision and smoothness. Recommendations include selecting machines with variable cutting angle capability, regular calibration and maintenance, and understanding wood material properties to determine optimal cutting angles and blade types. These findings help the wood industry enhance productivity and product quality.
Downloads
References
E. Yosefi Suryandari, “Analisis Permintaan Kayu Bulat Industri Pengolahan Kayu,” J. Penelit. Sos. dan Ekon. Kehutan., vol. 5, no. 1, pp. 15–26, 2008, doi: 10.20886/jpsek.2008.5.1.15-26.
I. W. Sutarman, “Pemanfaatan Limbah Industri Pengolahan Kayu di Kota Denpasar (Studi Kasus pada CV Aditya),” J. Penelit. dan Apl. Sist. dan Tek. Ind., vol. 10, no. 1, pp. 15–22, 2016, [Online]. Available: https://www.neliti.com/publications/182888/pemanfaatan-limbah-industri-pengolahan-kayu-di-kota-denpasar-studi-kasus-pada-cv
S. Mulyadi, “Pengaruh Kecepatan Potong, Gerak Makan Dan Ketebalan Pemotongan Terhadap Getaran Benda Kerja Pada Proses Sekrap,” Rotor Tek. Mesin, vol. 5, no. 1, pp. 38–39, 2012.
R. Wahyuniardi, L. H. Afrianti, S. Nurjaman, and W. Gusdya, “Sistem Informasi Berbasis Web Untuk Monitoring Dan Evaluasi,” J. Ilm. Tek. Ind., vol. 14, no. 2, pp. 174–186, 2016, [Online]. Available: https://journal.untar.ac.id/index.php/industri/article/viewFile/459/403
W. Wahjono, “Peran Manajemen Operasional dalam Menunjang Keberlangsungan Kegiatan Perusahaan,” J. Ilm. Infokam, vol. 17, no. 2, pp. 114–120, 2021, doi: 10.53845/infokam.v17i2.302.
D. W. Ariani, “Manajemen operasi jasa.” Universitas Terbuka, 2011.
C. A. P. PRADINA, “ANALISIS PENGOLAHAN LIMBAH KAYU LAPIS DALAM MENINGKATKAN KESEJAHTERAAN MASYARAKAT”.
A. Fahruddin and M. Mulyadi, “Rancang Bangun Alat Uji Head Losses Dengan Variasi Debit Dan Jarak Elbow 90O Untuk Sistem Perpipaan Yang Efisien,” Turbo J. Progr. Stud. Tek. Mesin, vol. 7, no. 1, 2018.
A. Supriyanto, “PENGOLAHAN LIMBAH PRODUKSI MEBEL KAYU SEBAGAI PRODUK INOVATIF DI DESA MANGGUNG KECAMATAN NGEMPLAK KABUPATEN BOYOLALI,” 2019.
D. Hamdani, I. Irzal, N. Helmi, and R. Rifelino, “Effect of Cutting Condition on the Surface Roughness Level of ST 42 Steel in Conventional Lathe Processes,” Motiv. J. Mech. Electr. Ind. Eng., vol. 2, no. 3, pp. 11–20, 2020, doi: 10.46574/motivection.v2i3.64.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
