Quality Control of Sandwich Panel Products Using Seven Tools and Six Sigma Methods
Pengendalian Kualitas Produk Sandwich Panel Menggunakan Metode Seven Tools dan Six Sigma
DOI:
https://doi.org/10.21070/ups.4728Keywords:
Quality Control, Seven Tools, Six Sigma, Sandwich PanelAbstract
PT XYZ is a company engaged in manufacturing that produces sandwich panels. The problem faced by this company is the large number of product defects during the production process in the October-December 2023 period amounting to 10% of total production. The purpose of this research is to identify product defect factors and provide technical recommendations to improve quality. The methods used are Seven Tools and Six Sigma to identify and evaluate potential failures at PT XYZ. The Seven Tools method by applying improvement steps and analyzing the types of defects with the Six Sigma method. The results showed that the factors causing product defects that can be seen from the fishbone diagram are known, namely, humans, machines, materials, and methods and provide suggestions for improvements that are applied to minimize the occurrence of defects. After the corrective action taken, it was able to minimize the number of defects by 5%.
Downloads
References
A. Mariansyah and A. Syarif, “Pengaruh Kualitas Produk, Kualitas Pelayanan dan Harga terhadap Kepuasan Konsumen Cafe Kabalu,” EKOMABIS J. Ekon. Manaj. Bisnis, vol. 1, no. 01, pp. 1–14, 2020.
A. Fatah and A. Z. Al-Faritsy, “Peningkatan dan Pengendalian Kualitas Produk dengan Menggunakan Metode PDCA (Studi Kasus pada PT. X),” J. Rekayasa Ind., vol. 3, no. 1, pp. 21–30, 2021, doi: 10.37631/jri.v3i1.288.
R. Saputri, P. Vitasari, and E. Adriantantri, “Identifikasi Timbulnya Produk Cacat Dengan Metode CTQ dan DPMO Pada Home Industry Keripik Tempe Sari Rasa,” J. Valtech, vol. 5, no. 1, pp. 94–100, 2022, [Online]. Available: https://ejournal.itn.ac.id/index.php/valtech/article/view/4518
F. A. Lestari and N. Purwatmini, “Pengendalian Kualitas Produk Tekstil Menggunakan Metoda DMAIC,” J. Ecodemica J. Ekon. Manajemen, dan Bisnis, vol. 5, no. 1, pp. 79–85, 2021, doi: 10.31294/jeco.v5i1.9233.
D. Ernawati, “Pengaruh Kualitas Produk, Inovasi Produk Dan Promosi Terhadap Keputusan Pembelian Produk Hi Jack Sandals Bandung,” JWM (Jurnal Wawasan Manajemen), vol. 7, no. 1, p. 17, 2019, doi: 10.20527/jwm.v7i1.173.
A. F. Shiyamy, S. Rohmat, and A. Sopian, “Artikel analisis pengendalian kualitas produk dengan,” J. Ilm. Manaj., vol. 2, no. 2, pp. 32–45, 2021.
U. Niarti, “Analisis Akuntansi Persediaan Produk Rusak Pada,” vol. 7, pp. 1–7, 2021, [Online]. Available: http://ejournal.polraf.ac.id/index.php/JIRA/article/view/54.[Accessed 29 Oktober 2021].
V. M. Dasmasela, J. Morasa, and S. Rondonuwu, “Penerapan Total Quality Management terhadap produk cacat pada PT. Sinar Pure Foods International di Bitung,” Indones. Account. J., vol. 2, no. 2, p. 97, 2020, doi: 10.32400/iaj.27796.
M. Nender, H. Manossoh, and S. J. Tangkuman, “Analisis Perlakuan Akuntansi Produk Rusak Dan Produk Cacat Dalam Perhitungan Biaya Produksi Untuk Menentukkan Harga Jual Pada Ud. 7 Jaya Meubel Tondano,” J. EMBA, vol. 9, no. 2, pp. 441–448, 2021, [Online]. Available: https://ejournal.unsrat.ac.id/index.php/emba/article/view/33485/31688
K. Damayant, M. Fajri, and N. Adriana, “Pengendalian Kualitas Di Mabel PT . Jaya Abadi Dengan,” Bull. Appl. Ind. Eng. Theory, vol. 3, no. 1, pp. 1–6, 2022.
F. Astuti and W. Wahyudin, “PERBAIKAN KUALITAS PADA PRODUKSI GENTONG MENGGUNAKAN METODE SEVEN TOOLS (Studi Kasus : Home Industry Bapak Ojid),” Barometer, vol. 6, no. 1, pp. 307–312, 2021, doi: 10.35261/barometer.v6i1.4444.
A. Merjani and I. Kamil, “Penerapan Metode Seven Tools Dan Pdca (Plan Do Check Action) Untuk Mengurangi Cacat Pengelasan Pipa,” PROFISIENSI J. Progr. Stud. Tek. Ind., vol. 9, no. 1, pp. 124–131, 2021, doi: 10.33373/profis.v9i1.3313.
A. Bakhtiar, B. R. Dzakwan, M. E. Br Sipayung, and C. A. Pradhana, “Penerapan Metode Six Sigma di PT Triangle Motorindo,” Opsi, vol. 13, no. 2, p. 113, 2020, doi: 10.31315/opsi.v13i2.4066.
W. O. Widyarto, A. Firdaus, and A. Kusumawati, “Analisis Pengendalian Kualitas Air Minum dalam Kemasan Menggunakan Metode Six Sigma,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 5, no. 1, p. 17, 2019, doi: 10.30656/intech.v5i1.1460.
M. S. ARIFIN, S. ADJIE, and E. SANTOSO, “Pengendalian Kualitas Dengan Metode Seventools Sebagai Alat Untuk Mengurangi Produk Cacat Pada Perusahaan Tanteka Sablon Ponorogo.,” ISOQUANT J. Ekon. Manaj. dan Akunt., vol. 3, no. 1, p. 25, 2019, doi: 10.24269/iso.v3i1.237.
A. S. M. Absa and S. Suseno, “Analisis Pengendalian Kualitas Produk Eq Spacing Dengan Metode Statistic Quality Control (SQC) Dan Failure Mode And Effects Analysis (FMEA) Pada PT. Sinar Semesta,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 3, pp. 183–201, 2022, doi: 10.55826/tmit.v1iiii.51.
M. E. Setiabudi, P. Vitasari, and T. Priyasmanu, “Analisis Pengendalian Kualitas Untuk Menurunkan Jumlah Produk Cacat Dengan Metode Statistical Quality Control Pada Umkm. Waris Shoes,” J. Valtech, vol. 3, no. 2, pp. 211–218, 2020, [Online]. Available: https://ejournal.itn.ac.id/index.php/valtech/article/view/2734
D. Novita, D. Dewiyana, and H. Irawan, “Analisis Pengendalian Kualitas Crumb Rubber Dengan Menggunakan Metode Seven Tools Di Pt. Batanghari Tebing Pratama,” J. Ind. Samudra, vol. 3, no. 1, p. 8, 2022, doi: 10.55377/jis.v3i1.5869.
A. Z. Al-Faritsy and C. Aprilian, “Analisis Pengendalian Kualitas Untuk Mengurangi Cacat Produk Tas Dengan Metode Six Sigma Dan Kaizen,” J. Cakrawala Ilm., vol. 1, no. 11, pp. 2733–2744, 2022.
E. Febrianti and Suparjo, “Analisis Pengendalian Kualitas Produk Polyurethane Sandwich Panel Dengan Metode Old Seven Tools Di Pt. Abc,” J. Has. Penelit., vol. 04, no. 2, pp. 114–119, 2019, [Online]. Available: jurnal.untag-sby.ac.id/index.php/jhp17
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
