Halal Risk Mitigation And Food Safety In Herbal Medicine Producers Using FMEA And SWOT Methods
Mitigasi Risiko Halal Dan Food Safety Dalam Produsen Jamu Menggunakan Metode FMEA Dan SWOT
DOI:
https://doi.org/10.21070/ups.4297Keywords:
Failure Mode And Effect Analysis (FMEA), severity weakness occurance Threats (SWOT), Halal supply chain, food safetyAbstract
Halal suppy chain management is halal supply network that managed to ensure halal integrity from raw materials to end consumers. Halal and food safety are important for consumers to choose the food to be consumed. The purpose of this study (1) To determine the priority of halal supply chain and food safety using the FMEA method (2) To determine the strategy to improve the risk of halal supply chain and food safety using the SWOT method. In this study, the highest RPN value of 261 was obtained in the selection of kencur raw materials because the business bought kencur raw materials from collectors in traditional markets so they didn’t know the material was safe for consumption or not. In the SWOT method, the results are obtained at quadrant point I, which means that business has many strengths and opportunities, and very possible for businesses to develop and achieve maximum progress.
Downloads
References
H. C. Wahyuni, H. Ubaidillah, and P. Handayani, “Sosialisasi dan Pendampingan Proses Sertifikasi Halal Untuk Mendorong UMKM Naik Kelas Di Kabupaten Sidoarjo,” J. ABDIMAS ADI BUANA, vol. 6, no. 1, pp. 71–78, 2022.
W. Warto and S. Samsuri, “Sertifikasi Halal dan Implikasinya Bagi Bisnis Produk Halal di Indonesia,” Al Maal J. Islam. Econ. Bank., vol. 2, no. 1, p. 98, 2020, doi: 10.31000/almaal.v2i1.2803.
Lukman, Supply Chain Management, Pertama. Gowa: CV Cahaya Bintang Cemerlang, 2021.
I. K. Pratiwi, Halal Supply Chain Management. Lombok Nusa Tenggara Barat: CV. Alfa Press, 2022.
H. C. Wahyuni and W. Sulistyowati, Buku Ajar Pengendalian Kualitas Industri Manufaktur dan Jasa. Sidoarjo: UMSIDA Press, 2020.
H. C. Wahyuni, I. Vanany, U. Ciptomulyono, and J. D. T. Purnomo, “Integrated risk to food safety and halal using a Bayesian Network model,” Supply Chain Forum, vol. 21, no. 4, pp. 260–273, 2020, doi: 10.1080/16258312.2020.1763142.
R. Asep, D. L. Trenggonowati, and V. Parida, “Usulan Aksi Mitigasi Risiko Rantai Pasok Halal Pada IKM Tahu Bandung Sutra Menggunakan Metode House of Risk,” J. Ind. Serv., vol. 5, no. 1, pp. 112–120, 2019.
R. Rustanto, A. T. Pratama, A. Febrianto, F. A. Syafutra, W. Septianugraha, and B. M. Walfitri, “Peningkatan Ketersediaan Fisik Dan Waktu Rata-Rata Antara Kegagalan Unit Komatsu Pc2000-8 Pada Pt. United Tractors, Tbk Dengan Metode Fmea,” J. Rekayasa Mesin, vol. 14, no. 2, pp. 371–384, 2023, doi: 10.21776/jrm.v14i2.1053.
F. Nursalam and W. W. Yunanda, “Analisis SWOT Dalam Manajemen Rantai Pasok Industri Pertahanan,” J. Tek. Ind., vol. 9, no. 1, pp. 331–337, 2023.
A. M. Ramdhani and A. N. Andriana, “Analysis Strategi Pengembangan Daya Tarik Wisata Pantai Biru Kersik Dalam Meningkatkan Minat Kunjungan Wisatawan Menggunakan Analisis SWOT,” Manag. Stud. Entrep. J., vol. 4, no. 5, pp. 6674–6687, 2023, [Online]. Available: http://journal.yrpipku.com/index.php/msej
Defrizal and S. F. Pramudya, “Analisis SWOT dalam Meningkatkan Daya Saing pada Toko Dura di Bandar Lampung,” J. Ekon. dan Manaj. Teknol., vol. 7, no. 3, pp. 776–782, 2023, doi: 10.35870/emt.v7i3.1268.
F. Rangkuti, SWOT Balanced Scorecard. Jakarta: PT Gramedia Pustaka Utama, 2011.
A. Ma’ruf, Analisis Strategi, 1st ed. Yogyakarta: CV Andi Offset, 2021.
A. Khatammi and A. R. Wasiur, “Analisis Kecacatan Produk Pada Hasil Pengelasan Dengan Menggunakan Metode FMEA (Failure Mode Effect Analysis),” J. Serambi Eng., vol. 7, no. 2, pp. 2922–2928, 2022, doi: 10.32672/jse.v7i2.3853.
N. M. Hidayatulloh and T. Sukmono, “Penentuan Interval Perawatan Peralatan Instrumentasi Produksi Pada Industri Kertas,” Product. Optim. Manuf. Syst., vol. 4, no. 1, pp. 23–31, 2020.
B. Salah, M. Alnahhal, and M. Ali, “Risk prioritization using a modified FMEA analysis in industry 4.0,” J. Eng. Res., pp. 1–9, 2023, doi: 10.1016/j.jer.2023.07.001.
A. F. Aufa, S. S. Dahda, and U. M. Gresik, “Analisis Risiko Proses Bongkar Muat Curah Kering Dengan Menggunakan Metode FMEA (FAILURE MODE AND EFFECT ANALYSIS) DI PT XYZ,” J. Inf. Technol. Comput. Sci., vol. 6, pp. 592–598, 2023.
D. Kristanto and M. Husyairi, “Analisis Titik Kritis Halal Pada Proses Produksi Kerupuk Di Jenius Snack Pleret Bantul Menggunakan Failure Mode and Effect Analisis (Fmea),” Pros. Konf. Integr. Interkoneksi Islam Dan Sains, vol. 4, no. 1, pp. 76–79, 2022.
T. Zakaria, A. D. Juniarti, and B. S. Budi, “Analisis Pengendalian Kualitas Cacat Dimensi Pada Header Boiler Menggunakan Metode Fmea Dan Fta,” J. InTent, vol. 6, no. 1, pp. 24–36, 2023.
R. Fitriana, D. K. Sari, and A. N. Habyba, Pengendalian Dan Penjaminan Mutu. Banyumas: Wawasan Ilmu, 2021.
F. D. P. Syafety and D. Samanhudi, “Analisis Strategi Pemasaran Menggunakan Metode Swot pada Air Mineral dalam Kemasan Bariklana Al-Amien Sumenep,” Briliant J. Ris. dan Konseptual, vol. 8, no. 2, p. 351, 2023, doi: 10.28926/briliant.v8i2.1190.
Sungkono, Bandar Udara Enclave Civil Berbasis Pembangunan Berkelanjutan. Malang: UB Media Percetakan, 2022.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
