Risk Management of Production Process Using Quality Risk Management and Failure Mode Effect and Critically Analysis Methods
Manajemen Risiko Proses Produksi Menggunakan Metode Quality Risk Management dan Failure Mode Effect and Critically Analysis
DOI:
https://doi.org/10.21070/ups.4296Keywords:
risk management, Production Process, QRM, FMECAAbstract
The production process of 600ml AQUA at PT Tirta Investama (AQUA) Pandaan is prone to risks, 247 units bottle density out of standards, 18 bottles per day the packaging label is not correct, 122 bottle codes are not read by the sensor, 7 times per day there is a box failure, the pallet’s barcode 3 times per day requires rework. This study aims to determine the risks with the highest critical points and risk mitigation. The method used is QRM to identify risks and FMECA to analyze the critical point of risk. The results obtained 42 risks detected with 20 acceptable risks, 21 tolerable risks, and 1 unacceptable risk, pallets stuck on the conveyor. The risk caused by the quality of the pallets out of standard so that the mitigation actions taken are the logistics department and machine operators for in-depth inspections related to the quality of the pallets.
Downloads
References
D. A. Walujo, T. Koesdijanti, and Y. Utomo, Pengendalian Kualitas. Surabaya: Scopindo Media Pustaka, 2020.
T. Novianti, Manajemen Risiko. Malang: Media Nusa Creative, 2017.
I. Marodiyah, A. S. Cahyana, and I. R. Nurmalasari, “INTEGRASI METODE QRM DAN FMEA DALAM MANAJEMEN RISIKO PETANI TEBU,” J. Produkt., vol. 02, no. 03, pp. 1–5, 2022.
W. U. Maulidah and H. C. Wahyuni, “Food Safety and Halal Risk Mitigation in Fish Crackers Supply Chain with FMECA and AHP,” Procedia Eng. Life Sci., vol. 1, no. 1, pp. 1–9, Mar. 2021, doi: 10.21070/pels.v1i1.844.
H. C. Wahyuni and W. Sulistyowati, Pengendalian Kualitas Industri Manufaktur dan Jasa. Sidoarjo: Umsida Press, 2020.
F. R. P. Nasution and I. N. Nasution, “IDENTIFIKASI RESIKO KEGAGALAN PROSES PRODUKSI TOILET SOAP PLANT (SABUN MANDI PADAT) DI PT. XYZ DENGAN MENGGUNAKAN METODE FAILURE MODES AND EFFECTS ANALYSIS (FMEA),” J. Manaj. Rekayasa Dan Inov. Bisnis, vol. 1, no. 1, pp. 45–59, 2023.
S. R. Hadiwiyanti and E. Yuliawati, “Penentuan Penyebab Cacat Kritis Produk dengan Menggunakan FMECA,” Semin. Nas. Teknol. Ind. Berkelanjutan II SENASTITAN II, vol. 2, pp. 26–34, 2022.
L. Wali et al., “Analisis Manajemen Risiko Pada PT. Nusa Indah Metalindo Menggunakan Metode House of Risk,” J. Teknol. Dan Manaj., vol. 3, no. 2, pp. 75–84, Nov. 2022, doi: 10.31284/j.jtm.2022.v3i2.3092.
I. Marodiyah and I. Sudarso, “ANALISIS RISIKO GUNA PENINGKATAN KUALITAS PROSES PEMBANGUNAN GEDUNG BERTINGKAT,” J. Ind. Eng. Manag., vol. 15, no. 2, pp. 49–60, 2020.
M. B. Yahman, A. Profita, and H. D. Widada, “Analisis Risiko dan Penentuan Strategi Mitigasi Pada Proses Produksi Beras,” MATRIK, vol. 20, no. 2, p. 67, Mar. 2020, doi: 10.30587/matrik.v20i2.1112.
A. R. Andriansyah and W. Sulistyowati, “PENGENDALIAN KUALITAS PRODUK CLARISA MENGGUNAKAN METODE LEAN SIX SIGMA DAN METODE FMECA (Failure Mode And Effect Cricitality Analysis),” PROZIMA Product. Optim. Manuf. Syst. Eng., vol. 4, no. 1, pp. 47–56, Mar. 2020, doi: 10.21070/prozima.v4i1.1272.
P. Chang and Y.-L. He, “Study of failure mode, effect and Criticality Analysis,” in 2016 International Conference on Applied Electronics (AE), Pilsen, Czech Republic: IEEE, Sep. 2016, pp. 93–96. doi: 10.1109/AE.2016.7577249.
A. Rahman and F. Fahma, “PENGGUNAAN METODE FMECA (FAILURE MODES EFFECTS CRITICALITY ANALYSIS) DALAM IDENTIFIKASI TITIK KRITIS DI INDUSTRI KEMASAN,” J. Teknol. Ind. Pertan., vol. 31, no. 1, pp. 110–119, Apr. 2021, doi: 10.24961/j.tek.ind.pert.2021.31.1.110.
W. N. Tanjung, S. A. Atikah, S. Hidayat, E. Ripmiatin, S. S. Asti, and R. S. Khodijah, “Risk Management Analysis Using FMECA and ANP Methods in the Supply Chain of Wooden Toy Industry,” IOP Conf. Ser. Mater. Sci. Eng., vol. 528, no. 1, pp. 1–8, May 2019, doi: 10.1088/1757-899X/528/1/012007.
F. R. Supoyo and R. A. Darajatun, “Analisis Pengendalian Kualitas Untuk Mengurangi Defect Parking Brake dengan Metode FMEA di PT XYZ,” J. Serambi Eng., vol. 8, no. 1, pp. 4438–4444, 2023.
T. Zakaria and A. D. Juniarti, “ANALISIS PENGENDALIAN KUALITAS CACAT DIMENSI PADA HEADER BOILER MENGGUNAKAN METODE FMEA DAN FTA,” J. InTent, vol. 6, no. 1, pp. 24–36, 2023.
B. Khrisdamara and D. Andesta, “Analisis Penyebab Kerusakan Head Truck-B44 Menggunakan Metode FMEA dan FTA (Studi Kasus : PT. Bima, Site Pelabuhan Berlian),” J. Serambi Eng., vol. 7, no. 3, pp. 3303–3313, Jul. 2022, doi: 10.32672/jse.v7i3.4255.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
