Work System Design in the Wallet Production Process Using the Full Time Equivalent (FTE) and Cardiovascular Load (CVL) Method
Perancangan Sistem Kerja pada Proses Produksi Dompet dengan Menggunakan Metode Full Time Equivalent (FTE) dan Cardiovascular Load (CVL)
DOI:
https://doi.org/10.21070/ups.3527Keywords:
Workload, Full Time Equivalent, CVL, Work System DesignAbstract
UKM Gudang Dompet is a company that produces wallets. The orders will affect the level of employee performance, because the targets achieved will definitely increase the workload for employees, causing fatigue. To prevent excessive fatigue felt by workers in the production division at Dompet Warehouse, it’s necessary to measure workload. Full Time Equivalent method’s a method of measuring working time based on working time, measuring the time needed to complete a particular task and then converting it into FTE index value. Cardiovascular Load method is a method of measuring physical workload based on comparison between pulses. working pulse with maximum pulse. The results of this research showed that fatigue occurred in packing section, indicated by CVL value more than 30%, so FTE calculations were carried out to determine energy consumption. Based on energy consumption calculations, the results obtained are an additional rest time of 32.85 minutes in the packing section.
Downloads
References
A. R. Putri, and A. Bakhtiar, "Analisis Beban Kerja Fisiologis Dan Psikologis Pada Tenaga Kerja Bongkar Muat Bahan Peledak Menggunakan Metode Cardiovaskular Load (CVL) Dan National Aeronautics and Space Administration – Task Load Index (NASA- TLX) (Studi Kasus PT Semen Padang)," Industrial Engineering Online Journal, vol. 12, no. 2, Mar. 2023. https://ejournal3.undip.ac.id/index.php/ieoj/article/view/38370.
B. Bakhtiar, S. Syarifuddin, and M.P. Putri,"Pengukuran Beban Kerja Dengan Metode Full Time G.K. Dewanti, "Analisis Metode Kerja Perakitan Kipas Angin Pada Proses Servis Kipas Angin Menggunakan Peta Tangan Kiri dan Tangan Kanan", STRING (Satuan Tulisan Riset dan Inovasi Teknologi), vol. 5, no.1, p. 11, 2020. Available at: https://doi.org/10.30998/string.v5i1.5887.
A.Y. Pradana and F. Pulansari, "Analisis Pengukuran Waktu Kerja Dengan Stopwatch Time Study Untuk Meningkatkan Target Produksi Di PT. XYZ", Juminten, 2(1), pp. 13–24, 2021. Available at: https://doi.org/10.33005/juminten.v2i1.217.
M. Rahayu, "Pengukuran Waktu Baku Perakitan Pena Dengan Menggunakan Waktu Jam Henti Saat Praktikum Analisa Perancangan Kerja", vol. 7, no. (2), 2020.
S. Riyadi,"Faktor Penyebab Terjadinya Kelelahan Kerja Pada Pekerja Pt. Dungo Reksa Di Minas", Jurnal Pengabdian Kesehatan Komunitas, vol. 1, no. 1, pp. 32–37, 2021. Available at: https://doi.org/10.25311/jpkk.vol1.iss1.716.
M. Juliana, A. Camelia, and A. Rahmiwati, "Analisis faktor risiko kelelahan kerja pada karyawan PT. arwana anugerah keramik", Jurnal Ilmu Kesehatan Masyarakat, vol. 9, no. 1, pp. 53–63, 2018. Available at: https://ejournal.fkm.unsri.ac.id/index.php/jikm/article/view/246B.
Bakhtiar, S. Syarifuddin, and M.P. Putri,"Pengukuran Beban Kerja Dengan Metode Full Time Equivalent Dan Penentuan Jumlah Tenaga Kerja Efektif Menggunakan Workload Analysis", Journal of Industrial Engineering and Operation Management, vol. 4, no. (1), pp. 5-9, 2021. https://doi.org/10.31602/jieom.v4i1.5332.
J N. Hudaningsih and R. Prayoga, "Analisis Kebutuhan Karyawan Dengan Menggunakan Metode Full Time Equivalent ( FTE ) Pada Departemen Produksi PT. Borsya Cipta Communica", Jurnal Tambora, vol. 3, no. 2, pp. 98–106. 2019.
A. Hakiim, W. Suhendar, and D. Agustina Sari, " Analisis Beban Kerja Fisik dan Mental Menggunakan CVL dan Nasa-TLX pada Divisi Produksi PT X ", Barometer, vol. 3, no. 2, pp. 142–146, Jul. 2018.
S. Siswanto, EM Widodo, and R. Rusdjijati, " Perancangan Alat Pengupas Salak Dengan Pendekatan Ergonomi Teknik", Borobudur Engineering Review, vol. 1, no. 1, pp.25-38, Mar. 2021.https://doi.org/10.31603/benr.3164
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
