Quality Analysis To Improve The Productivity Of Kusnia Clothing UMKM Using Six Sigma And Kaizen Methods
Analisis Kualitas Untuk Meningkatkan Produktivitas UMKM Kusnia Busana Dengan Metode Six Sigma Dan Kaizen
DOI:
https://doi.org/10.21070/ups.3267Keywords:
Quality, Increased Productivity, Six Sigma, Kaizen, DisabilityAbstract
UMKM Kusnia Clothing, a business in the field of clothing manufacturing, has a problem with the resulting product having a defect level in torn fabrics. The disability rate each month reaches an average of 28% per month. The impact of this defect will also be experienced in untidy stitches so that the order rate has decreased from 50% a day to 20%. The purpose of this study is to identify the sigma level in improving product quality and recommend improvements by implementing a kaizen five step plan. The method used is six sigma and kaizen to identify defects in products at UMKM Kusnia Clothing. Six Sigma, which focuses on actions that will reduce process variations while reducing production defects using statistical analysis. Kaizen drives management and production capabilities, which are essential for business growth, using small steps and a long-term approach.
Downloads
References
I. S. N. Asipa Khoerunnisa, M Ramadhan Miftahurahman, “Analisis Pengendalian Kualitas Produk Hinge AFT dengan Metode Six Sigma di PT X,” J. Surya Tek., vol. 10, no. 1, pp. 547–551, 2023, doi: 10.37859/jst.v10i1.4810.
D. Harits, Y. W. Praswoto, and W. I. Kurnia, “Usulan Peningkatan Kualitas Supramak Bed Menggunakan Pendekatan Lean Six Sigma dan Kaizen,” Performa Media Ilm. Tek. Ind., vol. 21, no. 1, p. 13, 2022, doi: 10.20961/performa.21.1.50955.
A. Basith, M. Indrayana, and J. Jono, “Analisis Kualitas Produk Velg Rubber Roll Dengan Metode Six Sigma Dan Kaizen,” J. Rekayasa Ind., vol. 2, no. 1, pp. 23–33, 2020, doi: 10.37631/jri.v2i1.128.
R. R. Andiwibowo, J. Susteyo, and P. Wisnubroto, “Pengendalian Kualitas Produk Kayu Lapis Menggunakan Metode Six Sigma & Kaizen Serta Statistical Quality Control Sebagai Usaha Mengurangi Produk Cacat,” J. Rekayasa Inov. Tek. Ind., vol. 6, no. 2, pp. 100–110, 2018.
A. B. S. Sulistyo and F. Sofiyulloh, “Analisis Perbedaan Pengukuran Berat Batubara Pada Sistem Belt Weigher Di Area Jetty Pt. Merak Energi Indonesia Dengan Menggunakan Metode Kaizen,” J. Rekayasa Sist. Ind., vol. 8, no. 1, pp. 22–28, 2022, doi: 10.33884/jrsi.v8i1.6387.
A. Z. Al-Faritsy and C. Aprilian, “Analisis Pengendalian Kualitas Untuk Mengurangi Cacat Produk Tas Dengan Metode Six Sigma Dan Kaizen,” J. Cakrawala Ilm., vol. 1, no. 11, pp. 2733–2744, 2022.
K. Nabila and R. Rochmoeljati, “Analisis Pengendalian Kualitas Menggunakan Metode Six Sigma Dan Perbaikan Dengan Kaizen,” Juminten, vol. 1, no. 1, pp. 116–127, 2020, doi: 10.33005/juminten.v1i1.27.
A. R. Andriansyah and W. Sulistyowati, “Clarisa Product Quality Control Using Methods Lean Six Sigma and Fmeca Method (Failure Mode And Effect Cricitality Analysis) (Case Study: Pt. Maspion Iii),” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 4, no. 1, pp. 47–56, 2021, doi: 10.21070/prozima.v4i1.1272.
H. C. Wahyuni, I. Vanany, U. Ciptomulyono, and J. D. T. Purnomo, “Integrated risk to food safety and halal using a Bayesian Network model,” Supply Chain Forum, vol. 21, no. 4, pp. 260–273, 2020, doi: 10.1080/16258312.2020.1763142.
D. Azis and R. Vikaliana, “PENGENDALIAN KUALITAS PRODUK MENGGUNAKAN PENDEKATAN SIX SIGMA DAN KAIZEN SEBAGAI UPAYA PENGURANGAN KECACATAN PRODUK,” J. InTent, vol. 6, no. 1, 2023.
N. Yanti, D. Herwanto, and D. Febriyanti, “Analisis Penerapan Lean Six Sigma DMAIC pada Pengendalian Kualitas Produk Cacat Part X di PT. XYZ,” J. Serambi Eng., vol. VIII, no. 1, pp. 4622–4632, 2023.
S. E. Mahardhika, A. Z. Al-faritsy, J. T. Industri, F. Sains, and U. T. Yogyakarta, “Meminimalisir Produk Cacat Pada Produksi Batik Cap Menggunakan Penerapan Metode Six Sigma Dan Kaizen,” J. Tek. Ind., vol. 9, no. 2, pp. 464–471, 2023.
R. F. Kusuma and A. Z. Al-faritsy, “Pengendalian Kualitas Jersey dengan Menggunakan Metode Six Sigma dan Kaizen pada UMKM Titik Terang Konveksi,” J. Ilm. Multidisiplin, vol. 2, no. 6, pp. 2208–2219, 2023.
M. R. Suhartini, “Analisis Pengendalian Kualitas Produksi Untuk Mengurangi Cacat Pada Produk Sepatu Menggunakan Metode Six Sigma dan Kaizen,” J. Manaj. Tek. Ind., vol. Volume XXI, no. 1, 2021, doi: 10.350587/Matrik.
L. D. F. Lauw Errin Laurentine, La Ode Ahmad Safar Tosungku, “ANALISIS PENGENDALIAN KUALITAS PRODUK SEPATU MENGGUNAKAN METODE SIX SIGMA DAN KAIZEN PADA CV. SEPATU SANI MALANG JAWA TIMUR,” Profisiensi, vol. 10, no. 1, pp. 41–48, 2022.
Y. A. N. Taufik Alfin Ashari, “ANALISIS PENGENDALIAN KUALITAS PRODUK DENGAN MENGGUNAKAN METODE SIX SIGMA DAN KAIZEN (Study Kasus: PT XYZ),” J. Cakrawala Ilm., vol. 20, no. 1, pp. 105–123, 2022.
M. Tirtana Siregar, Z. M. Puar, and D. Anwar, “Strategi Peningkatan Produktifitas Gudang Manufaktur Dengan Menggunakan Metode Six Sigma, Lean, Dan Kaizen Manufacturing Warehouse Productivity Improvement Strategy Using Six Sigma, Lean, and Kaizen Methods,” Pros. Semin. Nas. Manaj. Ind. dan rantai pasok, vol. 1, pp. 245–254, 2020.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
