Making of Prosthetics with Variation of Natural Fibers in the Making of Prospective Sockets
Pembuatan Prosthetics dengan Variasi Serat Alam pada Pembuatan Soket Kaki Palsu
DOI:
https://doi.org/10.21070/ups.3164Keywords:
composite, sansivera, polyster resin, socket prosthetics, tensile testing and BENDING TESTING ASTM D3039 AND ASTM D790Abstract
Composites with natural fiber reinforcement have their own uniqueness that imitation fibers do not have. Seratsansevieria as one of the best natural fiber producers, according to research that has been done, has good potential to be developed. This study discusses the manufacture and characteristics of plant fiber composites (sensevieria) with fiber fibers to be used as socket prosthetics. This composite uses a volume fraction of 30%, 5% naoh for 4 hours at room temperature. In the research conducted it was aimed to determine the mechanical properties of this composite by carrying out tensile tests and bending tests with astm d3039 and astm d790 testing standards. Based on the research that has been done regarding the analysis of plant fiber composites (sensevieria), the results obtained from the tensile strength, strain, and elastic modulus are: tensile strength of 5562.331 n. And bending strength of 551.133 n.
Downloads
References
Aisyah, W., Harijati, N. and Arumingtyas, L. (2011) ‘Kajian Morfologi, Anatomi dan Serat Daun Tanaman Sansevieria trifasciata yang Terdapat di Kota Malang’, Natural B, 1(2), pp. 120–129.
Fauziah, R.A., Sriwarno, A. B. (2017) ‘Pengembangan Desain Kaki Prostetik yang Berbasis Low-Cost untuk Industri Kecil Kaki Palsu di Indonesia’, Jurnal Tingkat Sarjana dan Desain, (1), pp. 1–7.
Febriyanto, E. W. and Widodo, E. (2022) ‘Procedia Of Social Sciences and Humanities Analysis Of Sansevieria Fiber Composite With Naoh Alkalization Analisa Komposit Serat Lidah Mertua ( Sansevieria ) Dengan Perlakuan Alkali Naoh Procedia Of Social Sciences and Humanities’, 0672(c), pp. 959–966.
Henaryati, R. H. and Mukhtar, A. (2019) ‘Kajian serat sansevieria trifasciata prain sebagai penguat material komposit’, pp. 96–101.
Junianto, A. D. and Kuswanto, D. (2018) ‘Desain Kaki Palsu untuk Membantu Aktivitas Berjalan pada Tuna Daksa Transtibial dengan Menggunakan Rapid Prototyping dan Reverse Engineering’, Jurnal Sains dan Seni ITS, 7(1). doi: 10.12962/j23373520.v7i1.29934.
Makhrus (2018) ‘Teori Definisi Uji Bending’, pp. 1–24.
‘Orthotist and Prosthetist’ (no date) Johns Hopkins Medicine. Available at: https://www.hopkinsmedicine.org/health/treatment-tests-and-therapies/orthotist-and-prosthetist.
Pirouzi, G. et al. (2014) ‘Review of the socket design and interface pressure measurement for transtibial prosthesis’, Scientific World Journal, 2014. doi: 10.1155/2014/849073.
Saidah, A., Susilowati, S. E. and Nofendri, Y. (2018) ‘Pengaruh Fraksi Volume Serat Terhadap Kekuatan Mekanik Komposit Serat Jerami Padi Epoxy Dan Serat Jerami Padi Resin Yukalac 157’, Jurnal Konversi Energi dan Manufaktur, 5(2), pp. 96–101. doi: 10.21009/jkem.5.2.7.
Salindeho, R. D., Soukota, J. and Poeng, R. (2013) ‘Pemodelan Pengujian Tarik Untuk Menganalisis Sifat Mekanik Material’, Jurnal Poros Teknik Mesin Unsrat, 2(2), pp. 1–11.
Tresna P. Soemardi, Widjajalaksmi Kusumaningsih and Irawan, A. P. (2009) ‘Epoksi Sebagai Bahan Alternatif Soket Prostesis’, Makara, 13(2), pp. 96–101.
Wanti, R., Dzulfikar, H. and Rudy, R. (2020) ‘Ekstraksi dan Karakterisasi Serat Alam dari Daun Sansevieria Laurenti dan Sansevieria Zeylinic’, Texere, 18(2), pp. 88–104. doi: 10.53298/texere.v18i2.59.
Hull. D. 1981. An Introduction to Composite Materials. Cambridge University Press. Cambridge.MA
Gapsari, F. (2013). Pengaruh Fraksi Volume Terhadap Kekuatan Tarik Dan Lentur Komposit Resin Berpenguat Serbuk Kayu. FEMA.
Gibson. R.F. 1994. Principles Of Composite Material Mechanics. Mc GrawHill Book Co.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
