Product Quality Control Using the Six Sigma method and Seven Tools in the PDL Shoe Industry
Pengendalian Kualitas Produk Menggunakan Metode Six Sigma dan Seven Tools pada Industri Sepatu PDL
DOI:
https://doi.org/10.21070/ups.27Keywords:
Defect , Quality, Six Sigma, Seven Tools, Shoes.Abstract
CV Yunanda is one of the companies whose manufacturing process is in the form of shoes and sandals, CV Yunanda has one of PDL's main products in the field of leather footwear. The problem with this company is a production defect. The purpose of this study is to determine the extent of the defects, determine the underlying causes of defective products, and make recommendations for improvement to reduce the number of defective products. This study uses seven tools and six sigma methods. The results showed that there were 4 types of product defects, namely 13% overlapping skin defects and 11% flexed skin, 10% wrinkled skin, 7% scratched skin. The proposed solution is to control, inspect and perform maintenance on machines or equipment used in the production process, establish SOPs for each machine area, improve human resources through training and improvement of the work environment.
Downloads
References
A. Ridwan, F. Arina, and A. Permana, “Peningkatan kualitas dan efisiensi pada proses produksi dunnage menggunakan metode lean six sigma (Studi kasus di PT. XYZ),” Tek. J. Sains dan Teknol., vol. 16, no. 2, p. 186, 2020, doi: 10.36055/tjst.v16i2.9618.
G. C. F. Candra, “Analisis Produktivitas Styrofoam Di Masa Pandemi Covid-19 Menggunakan Metode Cobb Douglas Di PT KCS,” Ind. Inov. J. Tek. Ind., vol. 11, no. 2, pp. 123–132, Sep. 2021, doi: 10.36040/industri.v11i2.3694.
G. C. Firmansyah, A. S. Herlambang, and W. Sumarmi, “Peran Sirkular Sampah Produk Untuk Meningkatkan Produktivitas Usaha Masyarakat Desa Bagorejo,” J. Pemberdaya. Masy., vol. 9, no. 2, p. 172, 2021, doi: 10.37064/jpm.v9i2.9769.
B. J. Hutapea, M. A. Hasmi, A. Karim, and Suginam, “Sistem Pendukung Keputusan Penentuan Jenis Kulit Terbaik Untuk Pembuatan Sepatu Dengan Menggunakan Metode VIKOR,” J. Ris. Komput., vol. 5, no. 1, pp. 6–12, 2018, [Online]. Available: http://seminar-id.com/prosiding/index.php/sensasi/article/view/111
A. K. Akmal, R. Irawan, K. Hadi, H. T. Irawan, I. Pamungkas, and Kasmawati, “Pengendalian Kualitas Produk Paving Block untuk Meminimalkan Cacat Menggunakan Six Sigma pada UD. Meurah Mulia,” J. Optim., vol. 7, no. 2, pp. 236–248, 2021.
L. Permono, L. A. Salmia, and R. Septiari, “Penerapan Metode Seven Tools Dan New Seven Tools Untuk Pengendalian Kualitas Produk (Studi Kasus Pabrik Gula Kebon Agung Malang),” J. Valtech, vol. 5, no. 1, pp. 58–65, 2022.
M. I. Nasution, M. A. Prayogi, and S. M. Affandy, “THE INFLUENCE OF PRODUCT QUALITY , PROMOTION OF THE SALES AT MICRO SHOES CRAFTSMEN IN DISTRICT MEDAN DENAI Muhammad Irfan Nasution , 2 Muhammad Andi Prayogi , 3 Pendahuluan Fokus perhatian,” no. December, 2017.
S. Bastuti, D. Kurnia, and A. Sumantri, “Analisis Pengendalian Kualitas Proses Hot Press Pada Produk Cacat Outsole Menggunakan Metode Statistical Processing Control (Spc) Dan Failure Mode Effect and Analysis (Fmea) Di Pt. Kmk Global Sports 2,” Teknol. J. Ilm. dan Teknol., vol. 1, no. 1, p. 72, 2018, doi: 10.32493/teknologi.v1i1.1419.
A. E. Pratiwi, “Pengaruh Harga, Kualitas Produk Dan Kepercayaan Terhadap Keputusan Pembelian Susu Zee,” J. Ilmu dan Ris. Manaj. …, vol. 8, no. 1, 2019, [Online]. Available: http://jurnalmahasiswa.stiesia.ac.id/index.php/jirm/article/view/1245
M. Yogi, P. Wisnubroto, and R. A. Simanjuntak, “Analisis Pengendalian Kualitas Produk Dengan Metode Six Sigma Dan Seven Tools Serta Kaizen Sebagai Upaya Mengurangi Produk Cacat Pada PT. Mitra Rekatama Mandiri,” J. Rekayasa dan Inov. Tek. Ind., vol. 5, no. 2, 2017.
P. Wisnubroto, T. I. Oesman, and W. Kusniawan, “Menggunakan Metode Seven Tool Guna,” vol. 2, no. 2, pp. 82–91, 2018.
K. Siregar and Elvira, “Quality control analysis to reduce defect product and increase production speed using lean six sigma method,” IOP Conf. Ser. Mater. Sci. Eng., vol. 801, no. 1, pp. 1–9, 2020, doi: 10.1088/1757-899X/801/1/012104.
S. H. Winarno, B. Givan, and Y. Yudhistira, “Pengaruh Kualitas Produk Dan Harga Terhadap Loyalitas Pelanggan Indosat Im3 Ooredoo,” Jesya (Jurnal Ekon. Ekon. Syariah), vol. 1, no. 2, pp. 1–7, 2018, doi: 10.36778/jesya.v1i2.9.
Downloads
Additional Files
Posted
License
Copyright (c) 2022 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
