Control of Outsole Products With Statistical Process Control (SPC) And Fault Tree Analysis (FTA)
Pengendalian Produk Outsole Dengan Metode Statistical Process Control (SPC) dan Fault Tree Analysis (FTA)
DOI:
https://doi.org/10.21070/ups.2526Keywords:
Defective Products, Fault Tree Analysis, Quality Control, Statistical Process ControlAbstract
PT. RC is a company located in one of the Pasuruan regency areas engaged in shoe production. Shoe products produced around 400 thousand pairs. However, in reality there are still products that have defective quality or have not met existing quality standards, one of which is in the outsole product. Thus the quality control of shoe outsole production applied by PT. RC is still not optimal so that analysis must be carried out on quality control efforts implemented by PT. RC. Statistical Process Control (SPC) and Fault Tree analysis (FTA) methods were used in an effort to minimize these defective products. Statistical Process Control (SPC) is the application of statistical techniques to control various processes and Fault Tree Analysis (FTA) is used to identify work process flows on the company's production floor. The most dominant types of defects in outsole products are defective types lacking material, color difference, and gross.
Downloads
References
Dewi, Indiah Ratna, Herminiwati. 2014. Lateks Karet Alam Untuk Sol Sepatu: Metode Pembuatan, Sifat Mekanik Dan Morfologi. Vol. 30. No. 2. Hlm. 61-70. Penulis Korespondensi, Majalah Kulit, Karet dan Plastik.
Devani, Vera, Fitri Wahyuni. 2016. Pengendalian Kualitas Kertas Dengan Menggunakan Statistical Process Control Di Paper Machine 3. Vol. 15. Hlm. 87-93. Jurusan Teknik Industri, UIN Sultan Syarif Kasim Riau.
Bustami, Bastian dan Nurlela. 2013. Akuntansi Biaya. Jakarta: Mitra Wacana Media.
Siregar, Baldric, Suripto, Bambang, dkk, 2013, AKUNTANSI BIAYA, Edisi kedua, Bab 2,7,9-11, Salemba Empat, Jakarta.
Herawati.S.D., dan I.C. Lestari., 2012,. Tinjauan Atas Perlakuan Akuntansi Untuk Produk Cacat Dan Produk Rusak., Proceedings,. ISSN- 2252-3936., Universitas Widyatama.
Solihudin, Mohamad, Lien Herliani Kusumah. 2017. Analisis Pengendalian Kualitas Proses Produksi Dengan Metode Statistical Process Control (Spc) Di Pt. Surya Toto Indonesia, Tbk. Hlm. 1-8. 2017. Program Studi Magister Teknik Industri, Universitas Mercu Buana.
Supriyadi, Edi. 2018. Analisis Pengendalian Kualitas Produk Dengan Statistical Process Control (Spc) Di Pt. Surya Toto Indonesia, Tbk. Vol. 1. No. 1. Hlm. 63-73. Dosen Teknik Industri Universitas Pamulang.
Agustiono, Galih. 2019. Analisis Pengendalian Kualitas Cacat Produk Di Pt. Mno Dengan Menggunakan Pendekatan Metode Six Sigma. Vol. 1. Hlm. 98-106. Teknik Industri, Fakultas Teknik, Universitas Maarif Hasyim Latif, Sidoarjo.
Suliantoro, Hery¬, Novie Susanto, dkk. 2017. Penerapan Metode Overall Equipment Effectiveness (Oee) Dan Fault Tree Analysis (Fta) Untuk Mengukur Efektifitas Mesin Reng. Vol. 12. No. 2. Hlm. 105-118. 2017. Program Studi Teknik Industri, Fakultas Teknik, Universitas Diponegoro, Tembalang, Semarang, Indonesia.
Anthony, Robert N dan Govindarajan, Vijay. 2015. Sistem Pengendalian Manajemen. Jakarta: Karisma Publishing Group.
Septiana, Ipan. 2019. Strategi Pengendalian Kualitas Produk Sofa Inul Dengan Menggunakan Metode Statistical Process Control (Spc) Pada Ikm Noni Meubel Di Banjarsari Kabupaten Ciamis. Vol. 6. No. 1. Hlm. 91-114. Teknik Industri Fakultas Teknik Universitas Galuh Ciamis 46215.
Ratri, Elisa Mardya, Eka Bambang, dkk. 2018. Peningkatan Kualitas Produk Roti Manis Pada Pt Indoroti Prima Cemerlang Jember Berdasarkan Metode Statistical Process Control (Spc) Dan Failure Mode And Effect Analysis (Fmea). Vol. 5. No. 1. Hlm. 200-207. Jurusan Manajemen, Fakultas Ekonomi dan Bisnis, Universitas Jember.
Fauzi, Yadi Ahmad, Hilmi Aulawi. 2016. Analisis Pengendalian Kualitas Produk Peci Jenis Overset Yang Cacat Di Pd. Panduan Illahi Dengan Menggunakan Metode Fault Tree Analysis (Fta) Dan Metode Failure Mode And Effect Analysis (Fmea). Vol. 14 No. 1. Hlm 29-34. Jurnal Kalibrasi, Sekolah Tinggi Teknologi Garut.
Mayangsari, Diana Fitria, Hari Adianto, dkk. 2015. Usulan Pengendalian Kualitas Produk Dengan Menggunakan Metode Failur Mode and Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta). Vol. 3. No. 2. Hlm. 81-91. Jurusan Teknik Industri Institut Nasional (Itenas) Bandung.
Hanif, Richma Yulinda, Hendang Setyo Rukmi, dkk. 2015. Perbaikan Kualitas Produk Keraton Luxury Di Pt. X Dengan Menggunakan Metode Failure Mode And Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta). Vol. 3. No. 3. Hlm 137-147. Jurusan Teknik Industri, Institut Teknologi Nasional (Itenas) Bandung.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
