Automatic Roof Design with Based Telegram Case Study On Aviary
Rancang Bangun Atap Otomatis Berbasis Telegram Studi Kasus pada Aviary
DOI:
https://doi.org/10.21070/ups.1389Keywords:
Automatic Roof, Aviary, Esp 32Abstract
Aviary is an enclosure containing flora and fauna with an ecosystem similar to their natural habitat with the aim
of being a breeding medium and as a place for hobby distribution for some people. Many factors support success in
developing an aviary, one of which is the weather conditions. Global warming is happening at this time causing erratic
weather conditions, in addition to the current condition there are still many aviaries that do not have roofs so that
when it rains standing water fills the inside of the aviary which causes disruption to the existing ecosystem in the
aviary. Based on this, this research was carried out with the intention of making an automatic roof on the aviary that
could work according to the prevailing weather conditions. IoT technology is also used so that the roof can be
controlled on time wherever we are via the internet network.
Downloads
References
I. F. Astuti, A. N. Manoppo, and Z. Arifin, “Sistem Peringatan Dini Bahaya Banjir Kota Samarinda Mengunakan Sensor Ultrasonic Berbasis Mikrokontroler Dengan Buzzer Dan Sms,” Sebatik, vol. 22, no. 1, pp. 30–34, 2018, doi: 10.46984/sebatik.v22i1.209.
D. Tjahja, F. Rahmatullah, and P. E. Ayu, “Wisata Kampung Kelengkeng Desa Simoketawang Sidoarjo,” pp. 27–44, 2022.
F. Dotulong, D. S. Marbun, and L. G. J. Giroth, “Prototype Buka Tutup Atap Otomatis Rumah Penjemur Kopra Berbasis Arduino,” CogITo Smart J., vol. 8, no. 1, pp. 271–281, Jun. 2022, doi: 10.31154/cogito.v8i1.398.271-281.
I. S. Novia Setya Putri Yunus, “Automatic Roof Control System in IoT-Based Clothes Drying Room,” Indones. J. Innov. Stud., vol. 13, pp. 6–12, 2021, doi: 10.21070/ijins.v13i.529.
Tri Harso Karyono, “Wujud Kota Tropis Di Indonesia: Suatu Pendekatan Iklim Lingkungan Dan Energi,” Dimens. (Jurnal Tek. Arsitektur), vol. 29, no. 2, pp. 141–146, 2001, [Online]. Available: http://puslit2.petra.ac.id/ejournal/index.php/ars/article/view/15755.
P. Agung, A. Z. Iftikhor, D. Damayanti, M. Bakri, and M. Alfarizi, “Sistem Rumah Cerdas Berbasis Internet of Things Dengan Mikrokontroler Nodemcu Dan Aplikasi Telegram,” J. Tek. dan Sist. Komput., vol. 1, no. 1, pp. 8–14, 2020, doi: 10.33365/jtikom.v1i1.47.
K. Hendriawan, “Atap Otomatis Sensor Suhu, Air Dan Tenaga Surya (Alas Tsusu),” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 1, no. 1, pp. 46–52, 2015, doi: 10.21831/elinvo.v1i1.10883.
Y. Efendi, “Internet Of Things (Iot) Sistem Pengendalian Lampu Menggunakan Raspberry Pi Berbasis Mobile,” J. Ilm. Ilmu Komput., vol. 4, no. 1, pp. 19–26, 2018, doi: 10.35329/jiik.v4i1.48.
N. B. Mahesa, “Rancangan Atap Otomatis Menggunakan Energi Surya Dengan Sensor LDR Berbasis IoT,” JATISI (Jurnal Tek. Inform. dan Sist. Informasi), vol. 8, no. 1, pp. 250–260, 2021, doi: 10.35957/jatisi.v8i1.634.
A. Sanaris and I. Suharjo, “Prototype Alat Kendali Otomatis Penjemur Pakaian Menggunakan NodeMCU ESP32 Dan Telegram Bot Berbasis Internet of Things ( IOT ),” J. Prodi Sist. Inf., no. 84, pp. 17–24, 2020.
M. R. Syawalludin and M. Hardjianto, “Penerapan Sensor Cahaya Dan Hujan Pada Sistem Otomatisasi Atap Menggunakan Arduino,” J. BIT, vol. 16, no. 1, pp. 16–21, 2019.
A. S. Salunkhe, Y. K. Kanse, and S. S. Patil, “Internet of Things based Smart Energy Meter with ESP 32 Real Time Data Monitoring,” in 2022 International Conference on Electronics and Renewable Systems (ICEARS), 2022, pp. 446–451, doi: 10.1109/ICEARS53579.2022.9752144.
Hilmansyah, R. M. Utomo, A. W. Saputra, and R. F. Alif, “Rancang Bangun Wireless Battery Monitoring System Berbasis ESP32,” Snitt, pp. 194–199, 2020, [Online]. Available: http://jurnal.unmuhjember.ac.id/index.php/ELKOM/article/view/3088.
A. Muhammad Satria Nugroho, “Implementasi Stepper 28BYJ-48 dan Servo MG996R sebagai Robot Lengan Pemanggang pada Alat Pemanggang Sate Otomatis Berbasis Arduino UNO,” Electrician, vol. 15, no. 2, pp. 96–99, 2021, doi: 10.23960/elc.v15n2.2169.
T. Kywe, T. Thae, E. Aung, H. Ngwe, and Y. Pwint, “Arduino Based Automatic Mini Cnc Machine for Drawing,” Ijciras, vol. 2, no. August, pp. 51–58, 2019.
N. Raghu, I. Miah, and A. B. R. Tonmoy, “Ultrasonic Sensor Based Door Security Camera with Wireless Data Transfer in Telegram Bot Using WIFI,” in 2023 International Conference on Intelligent and Innovative Technologies in Computing, Electrical and Electronics (IITCEE), 2023, pp. 402–405, doi: 10.1109/IITCEE57236.2023.10090954.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
