Preprint / Version 1

Rancang Bangun Monitoring dan Kontrol Pintu Bendungan Berbasis Visual Studio dengan Database Google Firebase Design Monitoring and Control of Dam Gate Based on Visual Studio with Google Firebase Database


Rancang Bangun Monitoring dan Kontrol Pintu Bendungan Berbasis Visual Studio dengan Database Google Firebase

##article.authors##

DOI:

https://doi.org/10.21070/ups.1062

Keywords:

Google Firebase Database, Visual Studio, Water Level Sensor, ULN Driver Motor 2003, Stepper Motor 28-BYJ48, Arduino Uno

Abstract

Indonesia is a tropical country that has two seasons, the rainy season and the dry season.Therefore, the government program plans to build a dam as a place to store water. This program is running but the implementation is still ineffective. we need monitoring that can measure the water level accurately. This makes researchers make design and build tool that can monitor the water level situation that is integrated with a database and an interface that can be observed at any time. For Wemos D1 R1 it is used to connect the data from the measurement of water levels into the Google Firebase database which is displayed with Visual Studio for a series of monitoring. Whereas in the control using a Water Level Sensor is used to measure the water level. to open and close the dam door using a stepper motor that is assisted by a ULN2003 stepper motor driver

Downloads

Download data is not yet available.

References

S. Wirjohamidjojo and Y. Swarinoto, IKLIM KAWASAN INDONESIA (Dari Aspek Dinamik - Sinoptik). 2010.

R. Ramadhani et al., “Alat Pendeteksi Ketinggian Air Dan Keran Otomatis Menggunakan Water Level Sensor Dan Sms Gateway Berbasis Arduino Uno,” vol. 9, no. 1, pp. 9–15, 2020.

A. Fauzan et al., “Blok Diagram yang dihubungkan oleh garis yang menunjukkan hubungan blok . Mereka banyak digunakan,” vol. 3, no. 1, pp. 84–94, 2022.

R. Rais and Y. F. Sabanise, “Sistem Monitoring Pintu Air Bendungan Menggunakan Mikrokontroler Wemos D1 R1 Berbasis Website,” J. Innov. Inf. Technol. Appl., vol. 1, no. 01, pp. 51–60, 2019, doi: 10.35970/jinita.v1i01.85.

M. I. Mahali, “Smart Door Locks Based on Internet of Things Concept with mobile Backend as a Service,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 1, no. 3, pp. 171–181, 2017, doi: 10.21831/elinvo.v1i3.14260.

F. A. Deswar and R. Pradana, “Monitoring Suhu Pada Ruang Server Menggunakan Wemos D1 R1 Berbasis Internet of Things (Iot),” Technol. J. Ilm., vol. 12, no. 1, p. 25, 2021, doi: 10.31602/tji.v12i1.4178.

S. SURABAYA, “Rancang Bangun Kontrol dan Monitoring Meteran Air PDAM Berbasis Internet Of Things,” 2019.

A. S. Mustaqim, D. Kurnianto, F. T. Syifa, and C. Author, “Implementasi Teknologi Internet of Things Pada Sistem Pemantauan Kebocoran Gas LPG dan Kebakaran Menggunakan Database Pada Google Firebase,” vol. 12, no. April, 2020.

B. Basri, Akhmad Qashlim, and Suryadi, “Relay Kontrol Menggunakan Google Firebase dan Node MCU pada Sistem Smart Home,” Technomedia J., vol. 6, no. 1, pp. 15–29, 2021, doi: 10.33050/tmj.v6i1.1432.

G. G. Maulana, S. Pancono, and A. Mia, “Desain Dan Implementasi Sistem Pengendalian Otomatis Untuk Mengatur Debit Air Pada Prototipe Bendung Sebagai Pencegahan Banjir, Politeknik Manufaktur Bandung,” vol. 4, no. 3, pp. 407–421, 2018.

A. Aziz and A. Zahra, “INTELLIGENT SYSTEMS AND APPLICATIONS IN ENGINEERING Prototype Design of Landfill Gas Pipe Leak Monitoring System Based on Microcontroller Node MCU ESP8266 with the Internet of Things Method,” vol. 11, no. 2, pp. 133–147, 2023.

N. Lestari, “Rancang Bangun Monitoring Bendungan Otomatis Berbasis Web Pada Bendungan Irigasi Di Desa G2 Dwijaya Kecamatan Tugumulyo Kabupaten Musi Rawas,” J. Sist. Komput. Musirawas, vol. 3, no. 2, p. 93, 2018, doi: 10.32767/jusikom.v3i2.329.

A. R. Kedoh, N. Nursalim, H. J. Djahi, and D. E. D. G. Pollo, “Sistem Kontrol Rumah Berbasis Internet of Things (Iot) Menggunakan Arduino Uno,” J. Media Elektro, vol. VIII, no. 1, pp. 1–6, 2019, doi: 10.35508/jme.v8i1.1403.

I. D. Cahyo, W. Kurniawan, M. Hannats, and H. Ichsan, “Implementasi Complementary Filter Pada Perancangan Alat Bantu Makan Penderita Parkinson,” J. Pengemb. Teknol. Inf. dan Ilmu Komput. Univ. Brawijaya, vol. 3, no. 1, pp. 770–773, 2019.

S. Syahrorini, S. D. Ayuni, F. Zulfiryansyah, and I. Rosyidah, “Organic Waste Crushing Machine Automation in an Eco Enzyme Production,” ELINVO (Electronics, Informatics, Vocat. Educ., vol. 7, no. 1, pp. 63–68, 2022.

D. Maulana Rizaldi, A. Wisaksono, D. Hadidjaja Rasjid Saputra, A. Ahfas, P. Studi Teknik Elektro, and F. Sains dan Teknologi, “IoT-Based Car Monitoring Engine Mounting Design Rancang Bangun Monitoring Engine Mounting (Bantalan Mesin) Mobil Berbasis IoT,” vol. 2, no. 2, 2022.

Posted

2023-05-24