Analysis of Work Accident Control in XYZ Laboratories
Analisis Pengendalian Kecelakaan Kerja Di Laboratorium XYZ
DOI:
https://doi.org/10.21070/ups.9698Keywords:
Occupational Health and Safety (OHS), HIRARC, FTA, occupational risks, laboratoryAbstract
The xyz laboratory has a high potential for occupational hazards due to the use of hazardous chemicals and physical activity in the process of making cylindrical concrete test specimens. Lack of risk control causes a high frequency of accidents, such as respiratory disorders, muscle injuries, and even lacerations. This study aims to determine the level of risk and formulate effective corrective measures in controlling the risk of occupational accidents in the xyz laboratory. The methods used are Hazard Identification, Risk Assessment, and Risk Control (HIRARC) and Fault Tree Analysis (FTA). Data were collected through observation and interviews with laboratory workers, then analyzed using a risk matrix and fault tree diagram. The results of the study indicate 16 occupational accident risks, consisting of 13 low-category risks, 1 medium-risk risk, and 2 high-risk risks. High risks include respiratory disorders when weighing cement and the concrete capping process.
Downloads
References
Radiyansyah A et al., MANAJEMENRISIKO PERUSAHAAN(Teori & Studi Kasus), 1st ed. Jambi: PT. Sonpedia Publishing Indonesia, 2023.
S. Y. Anita et al., manajemen risiko, 1st ed. Padang: PT GLOBAL EKSEKUTIF TEKNOLOGI, 2023.
I. Marodiyah, A. S. Cahyana, and I. R. Nurmalasari, “RISK MITIGATION IN SUGARCANE PLANTING USING FAILURE MODE AND EFFECT ANALYSIS METHOD,” Int. J. Multidisclipnary, vol. 1, pp. 102–107, 2024, doi: https://doi.org/10.61796/ijmi.v1i1.79.
N. M. Hanapi, N. Hannani, A. Latif, J. A. Zaki, M. Mawardi, and M. Kamal, “Integrating HIRARC and Fault Tree Analysis (FTA) for Comprehensive Work Health and Safety Assessment in a Wood Industry Workshop,” Semarak Int. J. Public Heal. Prim. Care, vol. 1, no. 1, pp. 1–15, 2024, doi: 10.37934/sijphpc.1.1.115.
R. Wardhana and Lukmandono, “Design Cost Control in Risk Management with the Expected Money Value (Emv) and Hirarc Method at Pt Xyz Jawa Timur Surabaya,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 4, no. 1, pp. 12–22, Mar. 2021, doi: 10.21070/prozima.v4i1.1276.
A. A. Syarif, U. N. Harahap, S. J. Sinaga, and M. Z. Siregar, “ANALISIS SISTEM KESEHATAN DAN KESELAMATAN KERJA DI PT SUMBER SAWIT MAKMUR DENGAN METODE HAZARD IDENTIFICATION RISK ASSESSMENT AND RISK CONTROL (HIRARC) DAN FAULT TREE ANALYSIS (FTA),” J. Al Ulum LPPM Univ. Al Washliyah Medan, vol. 11, no. 1, pp. 7–15, 2023, doi: 10.47662/alulum.v11i1.432.
Parawansyah C P, Widaningrum S, and Salma S A, “Analisis Risiko Keselamatan Kerja Pada Tahap Persiapan Pembuatan Pressure Vessel Memakai Metode Hirarc (Hazard Identification, Risk Assessment And Risk Control) Dan Fta (Fault Tree Analisys) (Studi Masalah : Pt. Xyz),” e-Proceeding Eng., vol. 11, no. 3, pp. 2207–2216, 2024.
C. W. Pamungkas, L. A. Novita, L. N. Khoirunnisa, M. P. Amalia, and D. O. Radianto, “ANALISIS RISIKO MESIN BUBUT DI POLITEKNIK PERKAPALANNEGERI SURABAYA MENGGUNAKAN METODE HIRARC,” J. Sains Student Res., vol. 2, no. 3, pp. 331–342, 2024, doi: DOI:https://doi.org/10.61722/jssr.v2i3.1393.
T. L. Hakim, M. Y. Suriyani, A. Paramita, and W. Harliyanti, “Identifikasi Bahaya dan Penilaian Risiko untuk Mengendalikan Potensi Kecelakaan Kerja di Laboratorium Klima Dasar Institut Teknologi Kalimantan (ITK),” Sci. Phys. Educ. J. (SPEJ, vol. 7, no. 1, pp. 8–19, Dec. 2023, doi: 10.31539/spej.v7i1.8071.
Guidelines for hazard identification, risk assessment and risk control (HIRARC). Department of Occupational Safety and Health Ministry of Human Resources Malaysia, 2008.
M. Rahmadaniel Yasmi, E. Amrullah, and R. Rian Zeva, “IMPLEMENTASI METODE HIRA DAN HAZOP UNTUK MEMINIMALISIR POTENSI BAHAYA KESEHATAN DAN KESELAMATAN KERJA PADA INDUSTRI FURNITUR,” 2024.
K. R. Surya, Nabila Lutfhfiyansary Ririh, “Analisis Risiko Kecelakaan Kerja Menggunakan Metode HIRARC dan Diagram Fishbone pada Lantai Produksi PT DRA Component Persada,” Go-Integratif J. Tek. Sist. dan Ind., vol. 2, no. 2, pp. 135–152, 2021, doi: 10.35261/gijtsi.v2i2.5658.
N. H. Fatma and D. E. M. Putra, “Usulan Perbaikan Pada Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Di PT. Surya Toto Indonesia Tbk Divisi Sanitary Dengan Metode HIRA Dan FTA,” J. Ind. Manuf., vol. 6, no. 1, pp. 27–42, 2021, doi: http://dx.doi.org/10.31000/jim.v6i1.4116.g2354.
A. H. Sakti, “Penggunaan Metode Fault Tree Analysis (FTA) dan Failure Mode Analysis (FMEA) Sebagai Usulan Reduksi Cacat Produk Obat Batuk Komix Peppermint Di PT. Bintang Toedjoe,” Sci. J. Ind. Eng., vol. 2, no. 1, pp. 16–21, 2021, doi: https://doi.org/10.30998/.v2i1.588.
Downloads
Additional Files
Posted
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
