Design and Structural Analysis of Meatball Printing Machine with Arduino Uno-Based Security System for Operator Protection
Desain dan Analisis Struktur Mesin Pencetak Bakso dengan Sistem Keamanan Berbasis Arduino Uno untuk Perlindungan Operator
DOI:
https://doi.org/10.21070/ups.9611Keywords:
Meatball Printing Automation, Operator Safety, Arduino Uno ControlAbstract
This research aims to design an efficient and safe meatball printing machine by implementing an Arduino Uno-based safety system. The design was carried out using SolidWorks 2024 to model the structure and analyze its strength through von Mises stress, Displacement, Strain, and Safety Factor simulations. The safety system was developed using an HC-SR04 ultrasonic sensor to detect the presence of the operator, and is equipped with a servo-based automatic printing and cutting mechanism. The analysis results show that the 20×20×1.5 mm hollow frame is able to withstand loads of up to 30 kg with a minimum safety factor value of 1.528 so it is declared safe. The application of Arduino Uno and the HC-SR04 sensor successfully increases operator protection through automatic distance detection. Thus, the resulting design meets the aspects of efficiency, relaxation, and work safety.
Downloads
References
A. M. Siregar, C. A. Siregar, and K. Umurani, “Desain Dan Pembuatan Mesin Pengaduk Srikaya Guna Membantu Meningkatkan Produktivitas Usaha Toko Roti di Kota Berastagi Sumatera Utara,” Ihsan J. Pengabdi. Masy., vol. 4, no. 1, 2022, doi: 10.30596/ihsan.v4i1.9970.
A. Prasetyadi et al., “Pandangan Siswa Terhadap Desain Berbantuan Komputer Dalam Pelatihan Solidworks Di Smk Nusantara Kudus,” Abdimas Altruis J. Pengabdi. Kpd. Masy., vol. 5, no. 1, pp. 42–46, 2022, doi: 10.24071/aa.v5i1.3892.
G. F. N. A. Garin And Y.Anton Nugroho, “Perancangan Alat Perancangan Alat Penggulung Benang Menggunakan Metode Vdi 2221 Pada Ukm Kf Kayra,” J. Ilm. Tek. Mesin, Elektro Dan Komput., Vol. 2, No. 3, Pp. 130–135, 2022, Doi: 10.51903/Juritek.V2i3.394.
W. D. Lestari, L. Edahwati, and N. Adyono, “Pelatihan CAD Static Simulation Menggunakan Solidworks di SMK Turen Malang,” E-Dimas J. Pengabdi. Kpd. Masyarakat; Vol 13, No 4 E-DIMAS; 757-761 ; 2528-5041 ; 2087-3565, 2022, [Online]. Available: http://journal.upgris.ac.id/index.php/e-dimas/article/view/12802
F. Kurniawan et al., “Program Pelatihan Perancangan Desain Universal Joint Sederhana Menggunakan Solidworks Kepada Para Guru di SMK Turen,” Abdi-mesin J. Pengabdi. Masy. Tek. Mesin, vol. 2, no. 1, pp. 46–55, 2022, doi: 10.33005/abdi-mesin.v2i1.31.
E. Prasetyo, R. Hermawan, M. N. I. Ridho, I. I. Hajar, H. Hariri, and E. A. Pane, “Analisis Kekuatan Rangka Pada Mesin Transverse Ducting Flange (TDF) Menggunakan Software Solidworks,” Rekayasa, vol. 13, no. 3, pp. 299–306, 2020, doi: 10.21107/rekayasa.v13i3.8872
F. Faujiyah and N. Sidik, “Perancangan Rangka Mesin Pencacah Cipuk (Aci Kerupuk),” J. TEDC, vol. 14, no. 1, pp. 29–34, 2020, [Online]. Available: https://ejournal.poltektedc.ac.id/index.php/tedc/article/view/343
N. S. Saputra, M. Muchlisinalahuddin, and A. Armila, “Rancang Bangun Mesin Pencetak Bakso,” J. Tek. Mesin, vol. 15, no. 2, pp. 115–120, 2022, doi: 10.30630/jtm.15.2.859.
A. R. Prasetyo, S. Yulianto, and E. Widodo, “Rancangan Prototipe Mesin Pengering Gabah Berbasis Teknologi Hybrid Prototype Design of Grain Dryer Machine Based on Hybrid Technology,” J. Konversi Energi dan Manufaktur , vol. 9, no. 1, pp. 32–42, 2024.
Rizky Wahyu Pradana, Ganjar Febriyani Pratiwi, and Tri Nur Arifin, “Rancang Bangun Sistem Pemantau Ketinggian Air Otomatis Menggunakan Sensor Ultrasonik (Hc-Sr04) Berbasis Arduino Uno Dengan Antarmuka Komputer Berbasis Microsoft Visual Basic 6.0,” J. Tek. dan Sci., vol. 3, no. 1, pp. 13–24, 2024, doi: 10.56127/jts.v3i1.1212.
A. F. Zulkarnain and M. Mulyadi, “Design and Cost of Pandan Chopping Machine Components with an Electric Motor Drive,” Indones. J. Cult. Community Dev., vol. 15, no. 2, Jun. 2024, doi: 10.21070/ijccd.v15i2.1183.
A. H. Nadyawan, “Aplikasi Sensor Ultrasonic HC-SR04 Pada Robot Anti Penghalang,” Semin. Nas. Fortei7-4, pp. 306–312, 2021.
Y. Irawan, Muhardi, R. Ordila, and R. Diandra, “Automatic floor cleaning robot using arduino and ultrasonic sensor,” J. Robot. Control, vol. 2, no. 4, pp. 240–243, 2021, doi: 10.18196/jrc.2485.
A. S. Ismailov and Z. B. Jo‘rayev, “Study of arduino microcontroller board,” "Science Educ. Sci. J., vol. 3, no. 3, pp. 172–179, 2022, [Online]. Available: www.openscience.uz
S. M. Kim, Y. Choi, and J. Suh, “Applications of the open-source hardware Arduino platform in the mining industry: A review,” Appl. Sci., vol. 10, no. 14, 2020, doi: 10.3390/app10145018.
S. S. Goswami and S. K. Sahoo, “Design of a Robotic Vehicle to Avoid Obstacle Using Arduino Microcontroller and Ultrasonic Sensor,” Adv. Transdiscipl. Eng., vol. 42, pp. 1002–1010, 2023, doi: 10.3233/ATDE231041.
S. Gao and L. K. Bhagi, “Design and research on CADDCAM system of plane based on NC machining technology.,” Comput. Aided. Des. Appl., vol. 19, no. S2, pp. 64–73, 2022, doi: 10.14733/cadaps.2022.S2.64-73.
G. Andriyanto, “Analisis Uji Statis pada Sambungan Las antara SS 201 Annealed dan AISI 4340 Steel Annealed dengan Solidworks,” pp. 1–8, 2021.
A. Sitepu and D. Brilioneristen, “Penerapan Design For Manufacturing And Assembly (DFMA) Pada Jam Dinding,” J. Energy dan Eng., vol. 6, no. 1, pp. 183–191, 2023, doi: 10.32734/ee.v6i1.1803.
S. Suryady and A. D. Sapto, “Pembebanan Statis terhadap Rangka Mesin Alat Pengaduk untuk Adonan Donat menggunakan Sofware FEA,” J. Tek. Mesin, vol. 13, no. 1, p. 22, 2024, doi: 10.22441/jtm.v13i1.17689.
Downloads
Additional Files
Posted
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
