High Temperature Test Assessment on Aluminum Composite Panel (ACP) for Polytetrafluoroethylene (PTFE)/Teflon Core Material
Pengkajian Uji Suhu Tinggi Pada Alumunium Composite Panel (ACP) Untuk Material Inti PoliTetraFlouroeTelene(PTFE)/Teflon
DOI:
https://doi.org/10.21070/ups.9455Keywords:
Aluminum Composite Panel (ACP), Core Material, Polytetrafluoroethylene (PTFE), Teflon, High Temperature Tested, Heat ResistantAbstract
Because of its strength, durability, light weight, and somewhat inexpensive manufacturing costs, aluminum composite panel, or ACP, is a widely used architectural material. However, polyethylene and polyurethane, the two most widely used conventional ACP core materials, are combustible and not heat-resistant, making them dangerous to use in buildings that are subjected to high temperatures. The purpose of this study is to investigate the application of Teflon/PolyTetraFluoroEthylene (PTFE) as a substitute ACP core material with excellent heat resistance. PTFE/Teflon core materials were used to fabricate ACP in order to conduct the experiment. Prior to testing, an optical microscope (MO) was used to weigh and observe the microstructure. They were placed in a furnace set to 300°C, 350°C, and 400°C for an hour in order to conduct high-temperature testing. Weighing the bulk and reexamining the microstructure allowed us to determine the test findings. According to the findings,
Downloads
References
P. Mohaney and G. Soni, “Aluminium Composite Panel as a Facade Material,” Int. J. Eng. Trends Technol., vol. 55, no. 2, pp. 75–80, 2018, doi: 10.14445/22315381/ijett-v55p215.
H. R. Wingrum and I. P. Rochana, “Perbandingan Penerapan Material Fasad Acp Dan Aluminium SheetTerhadap Iklim Tropis Pada Bangunan Apartemen Di Surabaya,” Siar V 2024 Semin. Ilm. Arsit., pp. 542–550, 2024.
Indah Prasetiya Rini, “Pengaruh Produktivitas Tenaga Kerja Terhadap Kinerja Waktu Proyek Pada Bangunan Bertingkat,” J. Infrastruktur, vol. 3, no. 2, pp. 127–135, 2019, doi: 10.35814/infrastruktur.v3i2.715.
W. MT, M. A. Syahputra, S. J. Akbar, and M. Muthmainnah, “Pemanfaatan Plastik Low Density Polyethylene (LDPE) dan Arang Tempurung Kelapa Sebagai Substitusi Sebagian Aspal Pada Lapisan AC-WC,” Teras J. J. Tek. Sipil, vol. 14, no. 2, pp. 485–496, 2024, doi: 10.29103/tj.v14i2.1149.
J. I. Duruaku, P. A. C. Okoye, N. H. Okoye, J. O. Nwadiogbu, V. I. Onwukeme, and R. U. Arinze, “An Evaluation of the Physicochemical, Structural and Morphological Properties of Selected Tropical Wood Species for Possible Utilization in the Wood Industry,” J. Sustain. Bioenergy Syst., vol. 13, no. 04, pp. 131–148, 2023, doi: 10.4236/jsbs.2023.134008.
M. E. Wicaksono, P. H. Tjahjanti, M. I. Mauliana, and E. Widodo, “Simulasi Numerik Aluminium Composite Panel (Acp) Dengan Variasi Material Inti,” Pros. Semin. Sos. Polit. Bisnis, Akunt. dan Tek., vol. 6, no. 1, pp. 189–196, 2025, doi: 10.32897/sobat.2024.6.1.4182.
P. Harmi Tjahjanti, A. Fahruddin, M. Mulyadi, S. Hardy Sujiatanti, M. Eryandrie Wicaksono, and R. Bamban Jakaria, “Core Material Manufacturing Study On Aluminum Composite Panel (ACP),” J. Improsci, vol. 2, no. 3, pp. 186–196, 2024, doi: 10.62885/improsci.v2i3.579.
P. Harmi and M. Ervandrie, “Analysis of PolyTetraFluoroEthylene ( PTFE ) fire resistance as core material for Aluminium Composite Panel ( ACP ),” vol. 10, no. 1, pp. 1–12, 2025.
L. Z. Maulana and A. Yulianto, “Aplikasi low density polyethylene (LDPE) pada pembuatan magnet ferrite komposit,” J. Sains Dasar, vol. 2, no. 1, pp. 72–78, 2013.
K. I. Harahap, “Pengaruh suhu penyimpanan terhadap kedalaman pengerasan dan kekuatan resin komposit,” Intisari Sains Medis, vol. 9, no. 3, pp. 30–34, 2019, doi: 10.15562/ism.v9i3.275.
K. L. N. Raj and K. G. Ashok, “Design and Fabrication of Vibration Damping Pad Using Luffa Cylindrica Fiber Reinforced Polymer Composite,” Int. J. Multidiscip. Res. Mod. Educ. ISSN, vol. II, no. December, pp. 2454–6119, 2016, [Online]. Available: www.rdmodernresearch.org
K. Suarsana, I. M. Astika, and L. Suprapto, “KARAKTERISASI KONDUKTIVITAS TERMAL DAN KEKERASAN KOMPOSIT ALUMINIUM MATRIK PENGUAT HIBRID SiCw/AL2O3,” J. Muara Sains, Teknol. Kedokt. dan Ilmu Kesehat., vol. 1, no. 2, pp. 108–116, 2018, doi: 10.24912/jmstkik.v1i2.1456.
A. G. Dylan, S. Sugiyarto, A. Wanto, A. Budi, and S. Sukanto, “THE Pembuatan Komposit Matrik Aluminium Diperkuat Silicon Carbida Dan Rice Husk Ash Dengan Metode Metalurgi Serbuk,” LONTAR J. Tek. Mesin Undana, vol. 10, no. 02, pp. 61–68, 2023, doi: 10.35508/ljtmu.v10i02.13481.
S. Wiryono, T. Ade Guna, R. Rodika, and M. Wahyudi, “Efek Pemadatan Panas Pada Komposit Matrik Aluminium Diperkuat Alumina/Baggase Ash Densitas Dan Kekerasan,” J. Inov. Teknol. Terap., vol. 2, no. 1, pp. 31–38, 2024, doi: 10.33504/jitt.v2i1.153.
A. Bawono, I. Suroso, and N. Utami, “Uji tarik komposit serat pandan alam sebagai komponen material bahan pengganti alternatif aluminium,” Din. Tek. Mesin, vol. 13, no. 2, p. 102, 2023, doi: 10.29303/dtm.v13i2.583.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
