Manufacturing Process Of Plastic Waste Shredding Machine Proces
Pembuatan Mesin Pencacah Sampah Plastik
DOI:
https://doi.org/10.21070/ups.9224Keywords:
Household Waste, Shredding Machine, Machine Design, Plastic WasteAbstract
The hydrant system is one of the essential components in building fire protection systems. To maintain stable pressure within the hydrant pipe network and ensure readiness during emergencies, a jockey pump or pressure maintenance pump is required to operate automatically. This study aims to analyze the feasibility of selecting a CR vertical multistage pump as the pressure maintenance pump for a hydrant system in a building with a total area of 55,000 m². The analysis is conducted by evaluating pump capacity, working pressure, energy efficiency, and compliance with applicable fire safety standards. The results show that the CR vertical multistage pump meets the technical and operational requirements for a pressure maintenance pump, with advantages in efficiency, compact design, and reliability in maintaining stable system pressure. The selection of this pump is considered appropriate to support a reliable fire protection system for large-scale buildings.
Downloads
References
Azhari dan Maulana, “Proses pencacahan sampah plastik sebagai alternatif pengelolaan limbah,” [Sumber tidak lengkap dalam naskah], 2018.
F. Silitonga et al., “Pengelolaan limbah plastik dan dampaknya terhadap lingkungan,” [Sumber tidak lengkap dalam naskah], 2020.
Suryati, “Pengelolaan limbah plastik menjadi produk bernilai guna,” [Sumber tidak lengkap dalam naskah], 2014.
Kementerian Lingkungan Hidup dan Kehutanan Republik Indonesia, Laporan tahunan pengelolaan sampah nasional, KLHK, 2022.
A. T. Prasetya dan A. Wicaksono, “Studi desain mesin pencacah plastik rumah tangga,” Jurnal Reka Mesin, vol. 12, no. 1, pp. 10–17, 2021.
B. Arifin, Teknik pengelasan dan fabrikasi mesin industri, Surabaya: Teknik Mandiri Press, 2020.
H. Widodo, Dasar-dasar perancangan mesin, Yogyakarta: Andi, 2017.
M. Rahman dan A. Saputra, “Evaluasi penggunaan baja S45C pada pisau pencacah plastik,” Jurnal Material Teknik, vol. 6, no. 1, pp. 21–26, 2022.
B. Supriadi dan D. Firmansyah, “Optimalisasi transmisi V-belt pada mesin pengolah limbah plastik,” Jurnal Mekanika, vol. 13, no. 2, pp. 55–63, 2021.
A. Kurniawan dan A. H. Utomo, “Pengaruh sudut mata pisau terhadap hasil cacahan plastik,” Jurnal Teknik Mesin Politeknik, vol. 8, no. 2, pp. 88–94, 2020.
S. Wahyudi, “Teknologi daur ulang plastik dan aplikasinya di masyarakat,” Jurnal Rekayasa Teknologi Lingkungan, vol. 4, no. 1, pp. 31–39, 2019.
T. Purnomo dan R. Andayani, “Penerapan teknologi tepat guna mesin pencacah plastik di desa pesisir,” Jurnal Pengabdian Masyarakat, vol. 3, no. 2, pp. 101–108, 2022.
M. Hamdani, “Analisis torsi dan putaran poros pada mesin shredder plastik,” Jurnal Teknik Mesin UNJ, vol. 7, no. 1, pp. 17–25, 2021.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
