Analysis of 3kg LPG Tube Welding Strength with Heat Treatment Treatment
Analisa Kekuatan Pengelasan Tabung LPG 3kg dengan Perlakuan Heat Treatment
DOI:
https://doi.org/10.21070/ups.917Keywords:
3kg LPG Tube, Welding, Heat Treatment, Annealing, Tensile Test, Macro PhotoAbstract
We can know the level of hardness of SMAW weld joints (shielding Metal Arc Welding) can be influenced by several factors, including the size of the welding amperage, the type of electrode and the treatment after welding. The object of this research test was carried out on a welded connection of a 3kg LPG gas cylinder which is the construction of a transition energy conversion gas cylinder from kerosene used by the community. The 3kg LPG cylinder is a pressure vessel that is a storage place for LPG (Liquidfied Petroleum Gas) with medium carbon steel plate material type JIS 295 with a plate thickness of 2.5 mm. in addition, the 3kg LPG gas cylinder has 3 general parts consisting of a tube handguard, tube body and footring tube with tube height ±80 mm and tube diameter 25 mm.
Downloads
References
N. Suhendi Syafei, “01 Analisa Penyebab Kegagalan Pengelasan Logam Stainless Steel (SA 213T2) dengan (SS 304 H),” J. Ilmu dan Inov. Fis., vol. 4, no. 2, pp. 140–154, 2020, doi: 10.24198/jiif.v4i2.27173
I. Wiharja et al., “02 PENGARUH PROSES HEAT TREATMENT TEMPERING TERHADAP STRUKTUR MIKRO DAN NILAI KEKERASAN PADA SAMBUNGAN LAS THERMITE BAJA UIC-54,” vol. 2, no. 4, pp. 454–462, 2014.
Mustafa, “03 Analisa Pembuatan Tabung Gas Lpg 3 Kg,” J. Teknol., vol. 3, no. 1, pp. 61–69, 2010, [Online]. Available: https://journal.akprind.ac.id/index.php/jurtek/article/view/843.
H. Fathu Rohman, Y. Umardani, and A. Tri Hardjuno, “04 Pengaruh Proses Heat Treatment Annealing Terhadap Struktur Mikro Dan Nilai Kekerasan Pada Sambungan Las Thermite Baja Np-42,” J. Tek. Mesin S-1, vol. 2, no. 3, pp. 195–203, 2014.
Wayan, S. Sori, Jakaria, artadi heru W, and Mulyono, “( 05) PADA SISTEM KONTROL PROSES PENGELASAN INNER DAN OUTER TABUNG IRADIASI CONTROL SYSTEM FOR INNER AND OUTER WELDING PROCESSES Selama ini proses pengelasan dilakukan secara manual . Proses pengelasan secara manual mempunyai risiko kecelakaan yang besa,” vol. 4, pp. 31–42, 2010.
S. Pengajar and U. Merdeka, “07 Analisa Pembuatan Tabung Gas Lpg 3 Kg Mustafa,” vol. 4, no. 1, 2010.
S. Balai, B. Bahan, B. Teknik, and A. Telah, “09 Pengaruh Parameter Las Proses Saw Terhadap the Influence of Saw Welding Parameters on Quality,” pp. 19–26, 2014.
R. Rosidi, B. Yuwono, and D. Yuhas, “Analisa Variasi Kuat Arus Elektroda E6013 Terhadap Sambungan Las Pada Pelat Baja Untuk Tabung Gas 3 Kg 10,” J. Poli-Teknologi, vol. 18, no. 3, pp. 233–242, 2019, doi: 10.32722/pt.v18i3.2341.
H. Fathu Rohman, Y. Umardani, and A. Tri Hardjuno, “11. PENGARUH PROSES HEAT TREATMENT ANNEALING TERHADAP STRUKTUR MIKRO DAN NILAI KEKERASAN PADA SAMBUNGAN LAS THERMITE BAJA NP-42,” 2014.
E. E. Merek, X. D. A. N. Y. Terhadap, and A. Suhadi, “12. Analisa Pengaruh Variasi Kuat Arus Dan Kampuh Las Antara Sambungan Las Pada Plat Lembaran Baja Untuk Tabung Gas 3 Kg,” vol. 3, no. 2, pp. 70–76.
A. Nugroho and E. Setiawan, “13. Pengaruh Variasi Kuat Arus Pengelasan Terhadap Kekuatan Tarik dan Kekerasan Sambungan Las Plate Carbon Steel ASTM36,” J. Rekayasa Sist. Ind., vol. 3, no. 2, pp. 134–142, 2018.
S. Fauzan and Hestiawn, “14. Sifat Mekanik Sambungan Las Smaw Pada Baja Amutit K-460,” WR Supratman Kandang Limun, Bengkulu. Telp, vol. 460, no. 12, pp. 424–426, 2017.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
