Risk Management by Integrating Probability Impact Matrix Method and SWOT Strategy in the Transformator Industry
Manajemen Risiko Dengan Mengintegrasikan Metode Probability Impact Matrix (PIM) dan Strategi SWOT di Industri Tranformator
DOI:
https://doi.org/10.21070/ups.9141Keywords:
Risk Management, Probability Impact Matrix, SWOT, Workplace Safety, Transformer IndustryAbstract
The transformator industry is a sector with a high risk of workplace accident, particularly during maintenance and repair processes. PT. Wismatata Eltra Perkasa, a company speciaizing in transformator maintenance, repair, and modification services, faces various potential hazards, such as elecctrocution, being crushed, or slipping. This study aims to identify and manage occupational accident risks during the transformer repair process at PT. Wismatata Eltra Perkasa. The Probability Impact Matrix (PIM) method was used to assess risk levels based on the probability and impact of potential hazards. Meanwhile, SWOT analysis was applied to formulate workplace safety improvement strategies by evaluating the company's internal and external factors. The results showed that the highest risk was electric shock during transformer disassembly, categorized as extreme. Several moderate and low-level risks were also found and require control measures. The SWOT analysis resulted in SO, WO, ST, and WT strategies to improve safety and competitiveness.
Downloads
References
A. Pratikno and M. Rahardjo, “Analisis Strategi Peningkatan Kinerja Perusahaan dengan Pendekatan SWOT-Balanced Scorecard pada PT Ipsi Karya Abadi,” J. Manaj. Bisnis dan Kewirausahaan, vol. 5, no. 2, p. 184, 2021, doi: 10.24912/jmbk.v5i2.11229.
Erdin Fahlefi, Akhmad Suraji, and Albani Musyafa, “Studi Deviasi Penerapan Aspek Hukum Pengadaan Konstruksi,” J. Ilm. Tek. Ind. Dan Inov., vol. 1, no. 3, pp. 10–18, 2023, doi: 10.59024/jisi.v1i3.288.
R. I. Siregar, S. Rahmawati, and A. Ramadhanu, “Analisa Sistem Informasi Manajemen Risiko Proyek Pembangunan Jalan Dengan Metode Probability Impact Matrix (PIM),” Pros. Senat., vol. 7, no. 1, pp. 53–57, 2022.
Y. A. Syamsiah et al., “Analisis Resiko Pada UMKM XYZ Menggunakan Analisa Swot Melalui pemahaman mendalam terhadap kondisi internal dan eksternal UMKM XYZ , dan keberlanjutan operasional UMKM di tengah dinamika bisnis yang terus berkembang . UMKM XYZ , yang ditunjukkan oleh perl,” vol. 1, no. 6, 2024.
T. H. Suryatman, M. E. Kosim, and G. E. Samudra, “Perencanaan Strategi Pemasaran Dengan Analisis Swot Dalam Upaya Meningkatkan Penjualan Sepatu Adidas Di Pt. Panarub Industry,” J. Ind. Manuf., vol. 6, no. 1, p. 43, 2021, doi: 10.31000/jim.v6i1.4117.
J. M. Bisnis and U. M. Tangerang, “STRATEGI PEMASARAN PENGEMBANGAN INVESTASI BISNIS KOMPONEN BAHAN BAKU PADA PT. EGA NUSANTARA,” vol. 8, no. 2.
Y. Rahmayanti, L. Sihombing, and M. Simanjuntak, “Identifikasi Faktor Risiko Cost Overrun yang Bernilai Risiko Tinggi Pada Tahap Perencanaan dan Tahap Pelaksanaan pada Proyek Gedung Tinggi di DKI Jakarta,” Pros. Semin. Nas. Tek. Sipil 2020 Fak. Tek. Univ. Muhammadiyah Surakarta, pp. 343–351, 2020.
I. I. Sholeh and B. Hartono, “Perspektif: Jurnal Ekonomi & Manajemen Universitas Bina Sarana Informatika Strategi Pengembangan Pemasaran Kerupuk ‘UD AGUNG’ dengan Metode Analisis SWOT,” J. Ekon. Manaj. Univ. Bina Sarana Inform., vol. 20, no. 1, pp. 84–89, 2022.
T. Saputro and D. Lombardo, “Metode Hazard Identification, Risk Assessment and Determining Control (HIRADC) Dalam Mengendalikan Risiko Di PT. Zae Elang Perkasa,” J. Baut Dan Manufaktur, vol. 03, no. 1, pp. 23–29, 2021.
A. Wildan, T. Sukwika, and K. Kholil, “Analisa Potensi Bahaya pada Proses Pembuatan Tablet Onkologi Menggunakan Metode HIRA,” J. Appl. Manag. Res., vol. 2, no. 1, pp. 53–65, 2022, doi: 10.36441/jamr.v2i1.850.
M. B. Anthony, “Analisis Risiko Kerja pada Area Hot Metal Treatment Plant Divisi Blast Furnace dengan Metode Hazard Identification and Risk Assessment (HIRA),” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 5, no. 1, p. 35, 2019, doi: 10.30656/intech.v5i1.1461.
Karunia, “IMPLEMENTASI STRATEGI PEMASARAN DENGAN MENGGUNAKAN METODE SWOT DALAM UPAYA MENINGKATKAN PENJUALAN PRODUK JASA ASURANSI KECELAKAAN DAN KEMATIAN PADA PT. PRUDENTIAL CABANG LAMONGAN,” vol. 4, no. June, p. 2016, 2016.
S. Setiyadi, K. Amar, and T. Aji, “UKM KULINER DENGAN MENGGUNAKAN METODE SWOT - AHP,” vol. 10, no. 2, pp. 68–77, 2011.
T. Lesmana and Y. Iskandar, “Strategi Pengembangan UMKM Industri Penginapan Berbasis Masyarakat Dengan Metode Swot (Studi Literatur),” J. Multidisiplin West Sci., vol. 1, no. 01, pp. 50–56, 2022, [Online]. Available: https://wnj.westscience-press.com/index.php/jmws/article/view/13
E. S. Eriana and A. Zein, “Implementasi Metode Scrum Dan Analisis Swot Sebagai Strategi Framework Customer Relationship Management(Crm) Pada Perusahaan Rental Mobil,” Sainstech J. Penelit. Dan Pengkaj. Sains Dan Teknol., vol. 31, no. 2, pp. 36–45, 2022, doi: 10.37277/stch.v31i2.1155.
R. T. Journal, “Faktor–Faktor Penyebab Rendahnya Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja (Smk3) Pada Perusahaan Bidang Pekerjaan Konstruksi,” vol. 8, no. 2, pp. 399–407, 2025.
R. Ambarwati, H. A. Putra, D. Dedy, W. Sulistiyowati, and B. I. Putra, “Enhancing Sustainable Safety Performance in the Construction Industry: A Total Safety Management Approach,” Binus Bus. Rev., vol. 16, no. 2, pp. 113–126, 2025, doi: 10.21512/bbr.v16i2.9672.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
