Rooftank Booster Pump Performance Efficiency Analysis
Analisa Efisiensi Kinerja Pompa Booster Rooftank
DOI:
https://doi.org/10.21070/ups.8978Keywords:
Centrifugal Pump, Distribution Of Clean Water, Head Loss, PipeAbstract
This research discusses the performance analysis of centrifugal pumps used to meet clean water needs in BUMN buildings in Surabaya. Clean water supply is very important for various daily needs, such as sinks, ablution faucets and toilets. Therefore, the piping system and pump installation must be planned well so that it can supply water with adequate and efficient pressure. This research uses 3 CDX/I 120/20 IE3 type pump units which are operated automatically with PLC control and a pressure switch to regulate the minimum pressure so that the pump can operate optimally. The analysis results show that the pump can supply 160 l/min of water per unit, and if the three pumps operate simultaneously, the total water supply reaches 480 l/min
Downloads
References
Hidayat, M. F., & Fajri, N., “Analisa Perhitungan Daya Pompa Sentrifugal Di Gedung Universitas 17 Agusutus 1945 Jakarta,” Jurnal Kajian Teknik Mesin, vol. 4, no. 1, pp. 7–14, 2019.
Widodo, E., & Dwi Jayanto, R., “The Manufacturing Planning of Installation Series-Parallel Combination Centrifugal Pump Testing Equipment,” R.E.M. (Rekayasa Energi Manufaktur) Jurnal, vol. 6, no. 1, pp. 33–40, 2021.
Candra, R., “Perancangan Pompa Sentrifugal Dan Diameter Luar Impeller Untuk Kebutuhan Air Kapasitas 60 Lpm Di Gedung F Dan D Universitas Muhammadiyah Tangerang,” Jurnal Teknik, vol. 7, no. 1, pp. 15–25, 2018.
Kusmantoro, A., “Penggunaan VSD Pada Pompa Booster Untuk Penghematan Pemakaian Daya Listrik,” 2014.
Siagian, J. S., Analisis Unjuk Kerja Pompa Sentrifugal Pada Booster Pump. Doctoral dissertation, Universitas Medan Area, 2020.
Naifah, S. F. R., Analisa Performance Booster Pump Terhadap Putaran Impeller Pada Kapal Dredger Tipe CSD (Cutter Suction Dredger). Doctoral dissertation, Institut Teknologi Sepuluh Nopember, 2017.
Mustakim, “Pengaruh Kecepatan Sudut Terhadap Efisiensi,” Jurnal Teknik Mesin Univ. Muhammadiyah Metro, vol. 4, no. 2, pp. 79–83, 2017..
S. H. S. E. A. Habibnur, “Analisis Head Losses Pada Circulating Fluida Air Dalam Dua Jenis Pipa,” vol. 9, no. 1, pp. 51–56, 2023.
T. Y. M. Luthfi, “Rancang Bangun Prototipe Fluid Friction Apparatus Untuk Menganalisis Kehilangan Energi (Head Loss) dengan Variasi Diameter Pipa,” Publikasi Riset Orientasi Teknik Sipil (Proteksi), vol. 5, no. 1, pp. 29–35, Jun. 2023, doi: 10.26740/proteksi.v5n1.p29-35.
R. T. Afandi, A. Akbar, and I. I. M. Etode, “Calculation of Head Loss of Water Distribution Line in Material Mixer at PT Matahari Putra Makmur [Perhitungan Head Loss Jalur Distribusi Air pada Mixer Bahan di PT Matahari Putra Makmur],” pp. 1–6.
Made Whidi, “Cara Menghitung Head Loss atau Kehilangan Tekanan Air di dalam Pipa,” 2021.
Syarif, “Penentuan Persamaan Faktor Gesekan Baru dengan Menggunakan Metode Regresi Multi Variable Bertolak Ukur pada Persamaan Faktor Gesekan Chen,” Jurnal POLIMESIN, vol. 2, no. 1, p. 85, 2019, doi: 10.30811/jop.v2i1.1405.
Colebrook, C. F., “Turbulent Flow in Pipes with Particular Reference to the Transition Region Between the Smooth and Rough Pipe Laws,” Journal of the Institution of Civil Engineers, vol. 11, no. 4, pp. 133–156, 1939.
Fahruddin, A., & Mulyadi, M., “Rancang Bangun Alat Uji Head Losses Dengan Variasi Debit Dan Jarak Elbow 90° Untuk Sistem Perpipaan Yang Efisien,” Turbo J. Progr. Stud. Tek. Mesin, vol. 7, no. 1, pp. 32–35, 2018, doi: 10.24127/trb.v7i1.680.
Ridwan, D., & Rahmandani, D., “Analisis Hidrolika Jaringan Irigasi Pipa Bertekanan (Studi Kasus Di Desa Cikurubuk Buah Dua Sumedang),” Jurnal Teknik Hidraulik, vol. 6, no. 1, pp. 13–26, 2015.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
