Optimization of City Transport Maintenance and Reliability Centered Maintenance (Rcm) Methods
Optimasi Perawatan Angkutan Kota dengan Menggunakan Metode Reliability Centered Maintenance (Rcm)
DOI:
https://doi.org/10.21070/ups.8557Keywords:
Reliability Centered Maintenance, FMEA, City TransportAbstract
The city transportation fleet in Pasuruan Regency, especially with the G3 code, often experiences damage that impacts operational time and driver income. This study aims to identify the engine components that most frequently fail using the Failure Mode and Effect Analysis (FMEA) method and calculate maintenance and repair costs using the Reliability Centered Maintenance (RCM) method. The analysis results show that the Platinum component is the most critical part with the highest Risk Priority Number (RPN) value of 384. The total repair cost for this component was recorded at IDR 172,813, while the cost of preventive maintenance was only IDR Rp105.781. Thus, the implementation of preventive maintenance is effective in reducing damage and reducing costs by up to 10%.
Downloads
References
R. Puspitasari, “Analisis Subsidi Angkutan Umum Perdesaan Bagi Pelajar di Kabupaten Pasuruan,” J. Penelit. Transp. Darat, vol. 20, no. 2, p. 93, 2019, doi: 10.25104/jptd.v20i2.918.
Harlan, Perencanaan transportasi untuk kota kecil. 2012.
S. Kasus, P. T. Nusa, and I. Jaya, “Perencanaan Perawatan Mesin dengan Pendekatan Metode Reliability Centered Maintenance ( RCM ) dan Maintenance Value Stream Map ( MVSM ),” vol. 7, 2022.
A. R. JokoPurnomo, Naufal Affandi2, “Jurnal Taguchi,” J. Ilm. Tek. dan Manaj. Ind., vol. 1, no. 2, pp. 154–169, 2021, [Online]. Available: https://taguchi.ippmbinabangsa.id/indexphp/home.
I. F. Trihartono, P. Renosori, and N. P. . Hidayat, “Usulan Perencanaan Perawatan Mesin Panda Menggunakan Metode Reliability Centered Maintenance (RCM) II,” Bandung Conf. Ser. Ind. Eng. Sci., vol. 2, no. 1, pp. 75–84, 2022, doi: 10.29313/bcsies.v2i1.2116.
H. H. Azwir, A. I. Wicaksono, and H. Oemar, “Manajemen Perawatan Menggunakan Metode RCM Pada Mesin Produksi Kertas,” J. Optimasi Sist. Ind., vol. 19, no. 1, pp. 12–21, 2020, doi: 10.25077/josi.v19.n1.p12-21.2020.
M. R. Widyaningrum and F. D. Winati, “Penjadwalan Perawatan Mesin di CV Wijaya Workshop dengan Pendekatan Reliability Centered Maintenance (RCM),” J. TRINISTIK J. Tek. Ind. Bisnis Digit. dan Tek. Logistik, vol. 1, no. 1, pp. 37–43, 2022, doi: 10.20895/trinistik.v1i1.455.
M. A. Maarif, “Manajemen Perawatan Truk Jenis Mitsubishi Dengan Pendekatan Metode Realibility Centered Maintenance (Rcm) Study Kasus Di Cv. Barokah Djaya,” JISO J. Ind. Syst. Optim., vol. 3, pp. 41–46, 2020, doi: 10.51804/jiso.v3i1.41-46.
Agung Budiman Tabri, “Analisis Penggunaan Mesin Pemeras Tebu dengan Metode Failure Mode and Effect Analysis (FMEA),” J. Manaj. Ind. dan Teknol., vol. Vol. 2, no. No. 1, p. PP. 41-49, 2017.
Z. Sinaga, S. Solihin, and M. Ardan, “Perencanaan Perawatan Mesin Welding Mig Pada Produksi Sub Frame Di PT. XYZ Dengan Metode Reliability Centered Maintenance (RCM),” J. Kaji. Tek. Mesin, vol. 6, no. 1, pp. 26–38, 2021, doi: 10.52447/jktm.v6i1.4328.
M. Burhannudin and M. Ansori, “Implementasi Reliability Centered Maintenance Pada Excavator Pc-800,” JISO J. Ind. Syst. Optim., vol. 5, no. 2, pp. 143–150, 2022.
P. Tinggi, D. Teknologi, I. Pertanian, F. T. Pertanian, and J. Barat, “Analisis Interval Pemeliharaan Komponen Kritis Unit Fuel Conveyor Dengan Pendekatan Reliability Centered Maintenance (Rcm,” J. Teknol. Ind. Pertan., vol. 32, no. 1, pp. 12–20, 2022, doi: 10.24961/j.tek.ind.pert.2022.32.1.12.
N. Fadillah and L. Mursyidah, “Table Of Content Article information ............................................ Rechtsidee,” Indones. J. Law Econ. Rev., vol. 14, no. 3, pp. 6–14, 2022.
E. M. Widodo, A. Rifa’i, and D. Prastiawan, “Kebijakan Perawatan Pompa Sentrifugal Di Instalasi Sumber Mata Air Kanoman I PDAM Kota Magelang,” Borobudur Eng. Rev., vol. 2, no. 2, pp. 93–111, 2022, doi: 10.31603/benr.7232.
D. Prasetya and I. W. Ardhyani, “PERENCANAAN PEMELIHARAAN MESIN PRODUKSI DENGAN MENGGUNAKAN METODE RELIABILITY CENTERED MAINTENANCE (RCM) (Studi Kasus: PT. S),” JISO J. Ind. Syst. Optim., vol. 1, no. 1, pp. 7–14, 2018, doi: 10.51804/jiso.v1i1.7-14.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
