Implementation of HSE on the Productivity of Construction Workers in Malang Using Structural Equation Modelling
Implementasi HSE Terhadap Produktivitas Pekerja Kontruksi di Malang Menggunakan Structural Equation Modelling
DOI:
https://doi.org/10.21070/ups.8500Keywords:
Productivity, Construction, OHSAS 18001, Structural Equation Modelling (SEM, HSEAbstract
This study analyzes the impact of implementing a Health, Safety, and Environment (HSE) system on construction worker productivity at PT Murinda Iron Steel using a Structural Equation Modelling (SEM) approach. Data were collected from 70 respondents through an online questionnaire and analyzed with IBM SPSS Amos 23. Validity and reliability tests confirmed that all indicators met statistical requirements. After modifying the model by removing certain indicators and outliers, the final model achieved an acceptable level of goodness of fit. Hypothesis testing revealed that perceptions of HSE implementation significantly affect worker productivity, with a p-value of 0.049 (<0.05) and a C.R of 1.972 (>1.96). The study concludes that implementing an HSE system in accordance with OHSAS 18001 standards contributes to improved efficiency in construction projects. Therefore, consistent and comprehensive application of HSE practices is strongly recommended to enhance worker safety and overall project performance in the construction sector.
Downloads
References
M. A. Rizki, “COMPONENTS,” vol. 1, no. 2, pp. 43–48, 2024.
I. Muslim, Z. Z, and F. Lubis, “Analisis Produktivitas Tenaga Kerja Pada Pekerjaan Dinding Facade (Studi Kasus Pada Proyek Pembangunan Hotel Pop Pekanbaru),” SIKLUS: Jurnal Teknik Sipil, vol. 5, no. 1, pp. 12–22, 2019, doi: 10.31849/siklus.v5i1.2388.
Diah Listyaningsih and Feri Harianto, “Iklim Keselamatan Kerja Pada Proyek Konstruksi Di Surabaya,” PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa, vol. 10, no. 1, pp. 70–83, 2021, doi: 10.22225/pd.10.1.2247.70-83.
S. Susanto, D. A. Karisma, K. C. Budi, Sumargono, and B. Winarno, “Faktor yang Berhubungan dengan Pengetahuan Penerapan Keselamatan Kerja pada Pekerja Konstruksi,” Jurnal CIVILLa, vol. 5, no. 2, pp. 476–485, 2020.
D. Maharani Kusumaningrum, “IMPLEMENTASI OHSAS 18001:2007 DI PT GUNANUSA UTAMA FABRICATORS GRENYANG¬BANTEN,” Mar. 2009.
F. R. Yulianto, “Identifikasi Bahaya Kecelakaan Kerja Di Pt.Toshin Prima Fine Blanking Menggunakan Metode Job Safety Analysis Dan Hazard Identification, Risk Assesment and Risk Control,” JUSTI (Jurnal Sistem dan Teknik Industri), vol. 2, no. 2, p. 222, 2022, doi: 10.30587/justicb.v2i2.3569.
dedy asmaroni, “Rekayasa Jurnal Teknik Sipil,” Rekayasa: Jurnal Teknik Sipil, vol. 4, no. 2, pp. 155–166, 2020, doi: 10.53712/rjrs.v4i2.777.
F. M. Azhari and I. Mustofa, “Strategi Meningkatkan Penggunaan Alat Pelindung Diri (APD) Pada Pekerja Proyek Konstruksi di Tulungagung,” Engineering and Technology International Journal, vol. 5, no. 02, pp. 198–205, 2023, doi: 10.55642/eatij.v5i02.404.
F. Antony, “Pembinaan Dan Pembekalan Dasar-Dasar Keselamatan Dan Kesehatan Kerja (K3) Ahli Muda K3 Konstruksi,” Jurnal Abdimas Mandiri, vol. 6, no. 1, pp. 14–19, 2022, doi: 10.36982/jam.v6i1.2074.
A. D. Yuliardi and I. B. Santoso, “Tanggung Jawab Perusahaan Outsourcing Terhadap Perlindungan Tenaga Kerja Dalam Berbagai Aspek Menurut Hukum Positif Indonesia,” Jurnal Ilmiah Living Law, vol. 12, no. 1, pp. 41–53, 2020.
L. K. Harahap, “Analisis SEM (Structural Equation Modelling) Dengan SMARTPLS (Partial Least Square),” Fakultas Sains Dan Teknologi Uin Walisongo Semarang, no. 1, p. 1, 2020.
Icam Sutisna, “Statistika Penelitian,” Universitas Negeri Gorontalo, pp. 1–15, 2020.
N. M. Janna and Herianto, “Artikel Statistik yang Benar,” Jurnal Darul Dakwah Wal-Irsyad (DDI), no. 18210047, pp. 1–12, 2021.
D. Parinata and N. D. Puspaningtyas, “Optimalisasi Penggunaan Google Form terhadap Pembelajaran Matematika,” Mathema: Jurnal Pendidikan Matematika, vol. 3, no. 1, p. 56, 2021, doi: 10.33365/jm.v3i1.1008.
H. Puspasari, W. Puspita, A. Farmasi Yarsi Pontianak, and K. Barat, “Uji Validitas dan Reliabilitas Instrumen Penelitian Tingkat Pengetahuan dan Sikap Mahasiswa terhadap Pemilihan Suplemen Kesehatan dalam Menghadapi Covid-19 Validity Test and Reliability Instrument Research Level Knowledge and Attitude of Students Towards ,” Jurnal Kesehatan, vol. 13, no. 1, pp. 65–71, 2022.
N. Shrestha, “Factor Analysis as a Tool for Survey Analysis,” Am J Appl Math Stat, vol. 9, no. 1, pp. 4–11, 2021, doi: 10.12691/ajams-9-1-2.
F. D. P. Anggraini, Aprianti, V. A. V. Setyawati, and A. A. Hartanto, “Jurnal Basicedu,” Jurnal Basicedu, vol. 6, no. 4, pp. 6491–6504, 2022.
Z. Ikhsania, “Pengaruh Implementasi Internal Marketing Terhadap Kinerja Melalui Kepuasan,” JIAP, Aug. 2015.
D. Aditya Setyawan, “KEMENTERIAN KESEHATAN RI POLITEKNIK KESEHATAN SURAKARTA 2014,” 2014.
F. S. Lubis, A. P. Rahima, M. I. H. Umam, and M. Rizki, “Analisis Kepuasan Pelanggan dengan Metode Servqual dan Pendekatan Structural Equation Modelling (SEM) pada Perusahaan Jasa Pengiriman Barang di Wilayah Kota Pekanbaru,” Jurnal Sains, Teknologi dan Industri, vol. 17, no. 1, p. 25, 2020, doi: 10.24014/sitekin.v16i2.9366.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
