Engine Overheat Analysis Vandam Printing Machine
Analisa Engine Overheat pada Mesin Printing Vandam
DOI:
https://doi.org/10.21070/ups.8473Keywords:
Vandam machine, , overheat, printing machine, cooling system, , damage analysis.Abstract
Vandammachineis one of the the units for logo production activities of various brands of drinks or coffee. PT SURYA INDO PLASTIC with an unscheduled breakdown rate that includes a long time among other production units in the company because it experiences engine over heat. The purpose of analyzing engine overheat is to find out and overcome the root of the problem in order to increase the PA (Physical Availability) of the unit. This approach is done by direct observation in the field. The results of the analysis show that overheat is caused by several factors, including non-optimal coolant circulation, dust accumulation on the radiator, and continuous use of the engine without a cooling break. Overheat has an impact on decreasing machine efficiency, potential component damage, and inconsistent print quality. . As a solution, it is recommended to perform periodic maintenance on the cooling system, increase ventilation in the machine room.
Downloads
References
P. Ananda and J. Jamaaluddin, “Pengaruh Radiasi Elektromagnetik dari Saluran Udara Tegangan Ekstra Tinggi ( SUTET ) terhadap kesehatan,” J. Umsida, vol. 2, no. 1, pp. 1–5, 2019.
A. Overheating, P. Compressor, D. Indrawan, and A. Dominite, “Analisa overheating pada compressor Sullair LS16-60/75/100,” J. Mesin dan Energi, vol. 1, no. 1, pp. 25–31, 2020. (Catatan: Nama jurnal disesuaikan jika ada).
R. D. Astut, “Improvement of work temperature at content printing workstation in Publishers and Printing CV Grafika Dua Tujuh,” J. Technol. Oper. Manag., vol. 15, no. 2, pp. 52–62, 2020
P. Prasetya, N. Nazarwin, and A. Seno, “Analisis penyebab terjadinya overheat pada main engine di kapal Self Propelled Oil Barge Tirta Samudra XVIII,” J. Cakrawala Bahari, vol. 5, no. 2, pp. 5–10, 2022, doi: 10.70031/jkb.v5i2.50.
S. D. Wisesa, D. Junaedi, and I. Susanto, “Analisa penyebab torque converter overheating pada unit buldozer CLGB160C,” J. Teknik Mesin Terapan, pp. 600–607, 2024. (Catatan: Tambahkan nama jurnal bila tersedia)A. Overheating, P. Compressor, D. Indrawan, and A. Dominite, “Analisa overheating pada compressor Sullair LS16-60/75/100,” J. Mesin dan Energi, vol. 1, no. 1, pp. 25–31, 2020.
. T. Transko, “Analisis masuknya air pendingin ke dalam cylinder main engine,” J. Teknik Perkapalan, vol. 2, no. 1, pp. 25–35, 2025. (Catatan: Tambakan nama jurnal jika belum dicantum
M. V. K. Mas, “Analisis sistem pendingin kapal,” Indonesian J. of Marine, vol. 1, pp. 1–7, 2024
N. Esp, S. U. Dsb, T. Fahriza, R. Subarkah, and D. Junaedi, “Prototipe pemantauan sistem pendingin alat berat berbasis IoT dengan notifikasi real-time,” Prosiding Seminar Nasional Teknologi, pp. 658–667, 2024. (Catatan: Disesuaikan jika prosiding atau jurnal)
. Klara, “Analisis keandalan sistem pendingin mesin induk kapal KM,” J. Riset Teknol. Perkapalan, vol. 1, no. 1, pp. 8–13, 2023.
L. D. Yuono, E. Budiyanto, and A. Ansori, “Analisa kerja alat uji prestasi mesin pendingin udara dengan kapasitas daya kompresor 1 PK,” J. Energi dan Pendingin, vo
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
