Risk Management of Chrome Drum Motor Process with FMEA and FTA Methods
Manajemen Risiko Proses Chrome Tromol Motor dengan Metode FMEA dan FTA
DOI:
https://doi.org/10.21070/ups.8279Keywords:
Risk Management, Failure Mode, Effect Analysis, Fault Tree AnalysisAbstract
. The chrome drum process in the XYZ chrome workshop goes through several stages and there are several risks that often occur in this workshop, namely the nickel layer is cracked and the chrome on the drum is not shiny, and in 3 months, namely September, October, November 2023 there were 43 drums, 10 drums experienced cracked nickel layers and 6 drums were not shiny so that risk control and the application of methods for controlling product rejects are needed so that similar incidents do not occur, therefore risk management is very necessary. The purpose of this study was to determine the risks of nickel plating, namely the layer on the drum is too thin and even cracked and the risk of chrome on the drum is not shiny. The method used in this study is a combination of FMEA and FTA.
Downloads
References
E. Krisnaningsih, P. Gautama, and M. F. K. Syams, “Usulan Perbaikan Kualitas Dengan Menggunakan Metode FTA dan FMEA,” J. InTent, vol. 4, no. 1, pp. 41–54, 2021.
I. Hanung, B. Setiawan, H. Yudo, and S. Jokosisworo, “Jurnal Teknik Perkapalan,” J. Tek. Perkapalan, vol. 5, no. 2, p. 456, 2017, [Online]. Available: http://ejournal-s1.undip.ac.id/index.php/naval
Ade S, “Analisis Proses Pelapisan Logam Dengan Metode Hardchrome Electroplating Pada Permukaan Dies Moulding Pada Pt. Rekayasa Putra Mandiri” vol. 8, no. 1, pp 56-72, 2023.
B. Mustofa, E. S. Paranita, and T. Sukwika, “Risk Management with the FMEA Method In The Kuwait Hospital Emergency Room Manajemen Risiko dengan Metode FMEA di Instalasi Gawat Darurat Rumah Sakit Kuwait,” Manag. Stud. Entrep. J., vol. 4, no. 5, pp. 7064–7077, 2023, [Online]. Available: http://journal.yrpipku.com/index.php/msej
Nanda R, S, and Inggit Marodiyah, “Risk Management in Production using Quality Risk Apporach and FMEA Manajemen Risiko Dalam Produksi Menggunakan Pendekatan Risiko Kualitas dan FMEA” Indones. J. Law Econ. Rev., vol. 19, no. 4, 2024.
B. Salah, M. Alnahhal, and M. Ali, “Risk Prioritization Using A Modified FMEA Analysis In Industry 4.0,” J. Eng. Res., vol. 11, no. 4, pp. 460–468, 2023, doi: 10.1016/j.jer.2023.07.001.
A. Li, “Risk Assessment Of Crane Operation Hazards Using Modified FMEA Approach With Z-Number and Set Pair Analysis,” Heliyon, vol. 10, no. 9, p. e28603, 2024, doi: 10.1016/j.heliyon.2024.e28603.
R. Kurniawan, “Risk Management Analysis With Fault Three Analysis (Fta) Method Compressor System Packed Drinking Water Pt. Swabina Gatra,” J. Teknovasi, vol. 9, no. 01, pp. 26–36, 2022, doi: 10.55445/jt.v9i01.35.
D. Yuliati, “Combined Risk Based Inspection and Fault Tree Analysis for Repetitive 3-Phase Line Piping Leakage at West Java Offshore Topside Facility,” J. Mater. Explor. Find., vol. 2, no. 3, 2023, doi: 10.7454/jmef.v2i3.1034.
Z. Kadang, T. A. R. Arungpadang, and J. S. C. Neyland, “Implementasi Metode Fault Tree Analysis Dalam Meminimalkan Risiko Kecelakaan Kerja Pada Perawatan Rubber Tyred Gantry Di Terminal Peti Kemas PT. Pelindo Iv Bitung,” J. Tekno Mesin, vol. 9, no. 2, pp. 73–84, 2023, doi: 10.35793/jtm.v9i2.49195.
Suparman, “Konteks Budaya Perkawinan Masyarakat Bugis Luwu (Kajian Antropolinguistik),” J. Pendidikan. Bhs. dan Sastra, vol. 4, no. 3, pp. 233–238, 2024.
M. I. Romadhoni, D. Andesta, and H. Hidayat, “Identifikasi Kecacatan Produk Kerangka Bangunan di PT. Ravana Jaya Menggunakan Metode FMEA Dan FTA,” J. Ind. Eng. Oper. Manag., vol. 5, no. 2, pp. 236–247, 2022, doi: 10.31602/jieom.v5i2.8629.
L. Mauludin and E. Adriantantri, “Perbaikan Cacat Produk Paving Dengan Menggunakan Metode SQC ( Statistical Quality Control ) Dan FTA ( Fault Tree Analysis ),” vol. 7, no. 2, 2024.
R. Alfianidah and A. G. Prafitasiwi, “Analisis Risiko Penyebab Keterlambatan Pada Proyek Pembangunan Pondasi Silo Phase 3 Ø 24 , 50 M Menggunakan Metode FTA ( Fault Tree Analysis ) Cost and Time Risk Analysis Of Delay Cause In The Construction Project Of Silo Foundation Phase 3 Ø 24 , 50 M Us,” vol. 01, no. 1, pp. 67–78, 2024.
J. S. Teknologi, “Identifikasi dan Analisa Awal Keterlambatan Progres Sampai Dengan Puncak Deviasi Progres Dalam Proyek Menggunakan Fault Tree Analysis Dan Failure Mode And Effect Analysis ( Studi Kasus : Pembangunan Jalan Sidodadi – Sumberrejo ) Initial Identification and,” vol. 6, no. 1, pp. 10–16, 2024.
I. Marodiyah, A. Sidhi Cahyana, and I. R. Nurmalasari, “Analisis Risiko Pada Proses Tanam Tebu Di Kabupaten Sidoarjo,” Proc. 1st SENARA , vol. 0672, no. 1, pp. 1087–1091, 2022, [Online]. Available: https://pssh.umsida.ac.id.
H. F. Noor, “Analisis Risiko pada Usaha Tani Benih Bawang Putih di Kabupaten Karanganyar, Jawa Tengah,” J. Pangan, vol. 30, no. 3, pp. 199–216, 2022, doi: 10.33964/jp.v30i3.523.
M. Anisa, B. Burhan, and C. Indarto, “Food Safety Risk Analysis of Songkem Duck Using Failure Mode and Effect Analysis ( FMEA ) Method Analisis Risiko Keamanan Pangan pada Bebek Songkem Menggunakan Metoda Failure Mode and Effect Analysis ( FMEA ),” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 8, no. 1, pp. 46–59, 2024.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
