Line Balancing Analysist in Production Areas Using the Largest Candidate Rule and Region Approach Method at PT Xyz
Analisa Keseimbangan Lintasan Pada Area Produksi Dengan Metode Largest Candidate Rule dan Region Approach di PT Xyz
DOI:
https://doi.org/10.21070/ups.7735Keywords:
Line balancing, Largest Candidate Rule, Region Approach, shoeAbstract
Abstract. Shoe manufacturing companies cannot achieve daily production targets due to an imbalance in the workload in the finishing area during the shoe shine process or what is usually called the creaming process. In this finishing process, each work station is carried out by 1 operator at each work station. The aim of this research is to balance the production trajectory of the finishing process. Researchers used the Large Candidate Rule (LCR) and Regional Approach (RA) methods. Comparison of the calculation results of track efficiency, smoothing index, balance delay, total Idle time, and total work stations. By using both methods, the RA method is the most optimal method. This is indicated by a track efficiency value of 81.73%, balance delay of 18.27%, total Idle time of 1.998 minutes, smoothing index of 0.931, and a total of 9 work stations..
Keywords - Line Balancing, Large Candidate Rule, Region Approach, shoe
Downloads
References
Rachman Taufiqur, Santoso Crystal Aviantari, “Perbandingan Metode Ranked Positional Weight (RPW), Metode Largest Candidate Rule, dan Metode J-Wagon Untuk Penentuan Keseimbangan Lintasan Optimal Produksi Sampel Sepatu Model SSOW,” J. Inovisi., vol. 15, no. 1, 2019.
Sofyan Diana Khairani, Syarifuddin, Meutia Sri, Islamiyati, “Penyeimbangan Lintasan Produksi Vulkanisir Ban Dengan Metode Larga Candidate Rule (LCR),” J. Optimalisasi, vol. 5, no. 1, 2019.
Antandito Dikki Julian, Choiri Mochammad, Riawati Lely, “ Pendekatan Lean Manufacturing Pada Proses Produksi Furniture Dengan Metode Cost Integrated Value Stream Maping,” J. Rekayasa Dan Manajemen Sistem Industri, vol. 2, no. 6, 2020.
Karmawan Masdani Irfan Prakoso, Pulansari Farida, Donoriyanto Dwi Sukma, “Analisis Line Balancing Menggunakan Metode Largest Candidate Rule, Killbridge And Western Method, Dan Ranked Positional Weights Methods Di PT. XYZ,” J. Manajemen Industri dan Teknologi, vol. 01, no. 01, 2020.
Eddy, Mifthahulahyan, “Optimalisasi Keseimbangan Lintasan Produksi Dengan Metode Largest Candidate Rule Di PT.PAP,” J. Simetri Rekayasa, Vol. 02, no. 02, 2020.
Aisyah Rika Isti, Suhaeni Tintin, “Nilai Yang Dirasakan Dari Produk Sepatu Dan Niat Pembelian Kembali Konsumen,” J. Riset Bisnis dan Investasi, vol. 5, no. 2, 2019.
Afifah Aisyah Nur Laili, Lestari Endah Rahayu, “Line Balancing Analysis in Ribbed Smoked Sheet Production Using Heuristics Methods (Study at PT Wabin Jayatama),” Bioconf. 90, 2023.
Azizah Fahriza Nurul, Wahyudin, “Penerapan Konsep Line Balancing Menggunakan Metode ranked Position Weight Pada Produksi Pakan Ternak PT XYZ”, J. Tek. Industri, Vol. 2, No. 4, 2023.
Minaturrahim Husain, DKK, “Analisis Perancangan Alat Pemetik Buah Mangga (LATIKMA)”, J. Al-azhar Indonesia Seri Sains dan Teknologi, vol. 7, no. 1, 2022.
Poncotoyo Wahyu, Ayutia Yolla, DKK, “Penerapan Metode Line Balancing Dengan Pendekatan Ranked Position Weight, Regional Approach, dan Largest Candidate Rules,” J. Sistem Transportasi & Logistik, vol. 2, no. 1, 2022.
Teshome Melkamu Mengistnew, Meles Tamrat Yifter, “Productivity Improvement Through Assembly Line Balancing by Using Simulation Modeling in Case of Abay Garment Industry Gondar”, J. heliyon 10, 2024.
Ardiyansyah Imam Arief, Amrina Uly, “Penyeimbangan Lintasan Produksi Dengan Metode Heuristic Ranked Posotional Weight dan Large Candidate Rule Pada Lini Perakitan Printer,” J. Tek. Sistem Industri, vol. 03, no. 02, 2022.
Nurwicaksono Aditya Fahmi, Rusindiyanto, “Perbaikan Lintasan Produksi Dengan Penerapan Large Candidate Rule (LCR) Dan Killbridge And wester Pada Proses Produksi Di PT EJ,” J. Tekmapro, vol. 15, no. 02, 2020.
Yaqin M.Ainul, Fadhilah Farah Rizky, DKK, “Optimasi Penjadwalan Kegiatan Pondok Pesantren Dengan Precedence Diagram Method (PDM),” J. Riste Sistem Informasi Dan Teknik Informatika, vol. 5, no. 2, 2022.
Purnomo Hadi, Kusuma Harun Indra, “Analisis Perancangan Stasiun Kerja Dalam Meproduksi Produk Inalcafa Jacket Dengan Lima Metode Line Balancing”, J.Tek. Terapan, vol. 8, no. 1, 2024.
Gary, Philip Smale. (2015). “Industrial Engineering Manual”. Global Shoe Production. Denmark.
Gary, Philip Smale. (2015). “Department KPI Standart”. Global Shoe Production. Denmark.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
