Behavior-Based Safety Analysis of Workers in Plastic Production Environment Using Do It and RCA Methods
Analisis Keselamatan Berbasis Perilaku Pada Tenaga Kerja Di Lingkungan Produksi Plastik Menggunakan Metode Do It dan RCA
DOI:
https://doi.org/10.21070/ups.7659Keywords:
Behavior Based Safety (BBS), Do It, Work Safety, RCAAbstract
Occupational safety is crucial in the manufacturing industry, especially in the plastic production sector, which has a high risk of workplace accidents. PT. XYZ faces challenges in reducing unsafe worker behavior despite implementing various safety regulations. This study analyzes the implementation of Behavior-Based Safety (BBS) using the Do It method to improve safety compliance. Initial observations showed unsafe behavior at 70% in the work environment, 70% in body posture, and 74% in equipment use. After behavior-based interventions, safe behavior improved to 73% in the work environment, 74% in body posture, and 84% in equipment use. These results indicate that implementing BBS with the Do It method effectively reduces workplace accidents and increases safety awareness. Recommendations for improvement using the 5 Whys method include continuous supervision, regular safety training, and improvements in workplace facilities and procedures to maintain this progress.
Downloads
References
A. Baharuddin, S. A. Fachrin, and W. E. Putri, “Behavior Based Safety Implementation Using the DO IT Method at Pertamina in Makassar City,” Divers. Dis. Prev. Res. Integr., vol. 4, no. 1, pp. 30–36, 2023.
B. I. Putra and R. B. Jakaria, Buku Ajar Analisa dan Perancangan Sistem Kerja, UMSIDA Pre. Sidoarjo, 2020.
A. B. C. Dewi, S. Rachmawati, F. Firmansyah, A. F. K. Wardani, and N. Nafilah, “Hubungan Tingkat Pengetahuan Dan Pelatihan Terhadap Behavior Based Safety Pada Tenaga Kesehatan Di Rumah Sakit X,” J. Ind. Hyg. Occup. Heal., vol. 8, no. 2, pp. 133–143, 2024.
Y. Saputra, M. Widyantoro, P. F. Eko, and P. N. Andini, “Analisis Safety Performance Index Dengan Pendekatan Behavior-Based Safety Pada Industri Manufaktur Komponen Otomotif,” J. Ind. Eng. Syst., vol. 2, no. 1, pp. 13–20, 2021.
V. E. Alim and K. Widiawan, “Upaya Meminimalkan Kecelakaan Kerja di PT. X dengan Pendekatan Behavior Based Safety (BBS),” J. Titra, vol. 11, no. 2, pp. 161–168, 2023.
A. G. Ismail, S. S. Dahda, and A. W. Rizqi, “Analisis Penyebab Kecelakaan Kerja Pada Pekerja Konstruksi Di Pt. Standar Beton Indonesia Dengan Pendekatan Metode Behavior Based Safety,” JUSTI (Jurnal Sist. dan Tek. Ind., vol. 3, no. 2, pp. 262–266, 2022.
Ruru Virgillus and Susanti Elva, “Identifikasi Bahaya Dan Penilaian Resiko Terhadap Pencegahan Kecelakaan Dan Kesehatan Kerja Pada PT Indotirta Suaka,” SNISTEK Pros. Semin. Nas. Ilmu Sos. dan Teknol., vol. 3, no. 1, pp. 1–10, 2020.
A. Larasatie, M. Fauziah, D. Dihartawan, D. Herdiansyah, and E. Ernyasih, “Faktor-Faktor Yang Berhubungan Dengan Tindakan Tidak Aman (Unsafe Action) Pada Pekerja Produksi Pt. X,” Environ. Occup. Heal. Saf. J., vol. 2, no. 2, pp. 133–146, 2022.
Nurdiana Tanjung and Susilawati Susilawati, “Pentingnya Penggunaan Alat Pelindung Diri (APD) pada Pekerja Bangunan terhadap Keselamatan Kerja,” Corona J. Ilmu Kesehat. Umum, Psikolog, Keperawatan dan Kebidanan, vol. 2, no. 2, pp. 86–96, 2024.
P. Sukapto and J. Arlene, “Penerapan Do It Method Untuk Meningkatkan Kesadaran Keselamatan Dan Kesehatan Kerja (Studi Kasus Di Pt. X),” J. Kesehat. Med. Saintika, vol. 9, no. 2, pp. 111–125, 2018.
A. Subahan, D. X. Dista, and R. Witarsa, “Kajian Literatur Tentang Kebijakan Pendidikan Dasar Di Masa Pandemi Dan Dampaknya Terhadap Pembelajaran,” J. Rev. Pendidik. dan Pengajaran, vol. 4, no. 1, pp. 1–9, 2021.
A. S. Pata’dungan et al., “Penerapan Program Behavior Based Safety dalam Meminimalkan Risiko Kecelakaan Kerja di CV. Putra Sejahtera Abadi, Balikpapan,” J. Abdi Masy. Indones., vol. 4, no. 3, pp. 739–744, 2024.
F. A. Sirait and I. Paskarini, “Analisis Perilaku Aman Pada Pekerja Konstruksi Dengan Pendekatan Behavior-Based Safety (Studi Di Workshop Pt. X Jawa Barat),” Indones. J. Occup. Saf. Heal., vol. 5, no. 1, pp. 91–100, 2017.
M. Q. Ayuni, M. Yusuf, and E. Dwiyanti, “Performance Analysis of the Behavior Based Safety Program in Reducing Occupational Accident Rates,” Indones. J. Occup. Saf. Heal., vol. 11, no. 2, pp. 275–284, 2022.
V. Putri, Lintang Laily Aprilia , Paramarta, “Analisis Budaya Perilaku Safety Perawat Di Salah Satu Rumah Sakit Mojokerto,” J. Inov. Manaj. Bisnis, vol. 6, no. 4, pp. 16–26, 2024.
W. Darmawan, C. T. Yuliana, Jumaedi, Muhidin, and W. Widhiantika, “Peningkatan Pengetahuan Tentang Pencegahan Kecelakaan Kerja Pada Pekerja Di Smk Sehati Karawang,” J. Pengabdi. Kpd. Masy., vol. 4, no. 2, pp. 963–976, 2024.
E. Mahawati et al., Keselamatan Kerja dan Kesehatan Lingkungan Industri, Yayasan Ki. Semarang, 2021.
S. Noventya Cahyani, M. T. Safirin, D. S. Donoriyanto, and N. Rahmawati, “Human Error Analysis to Minimize Work Accidents Using the HEART and SHERPA Methods at PT. Wonojati Wijoyo,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 6, no. 1, pp. 48–59, 2022.
R. Wardhana and Lukmandono, “Design Cost Control in Risk Management with the Expected Money Value (Emv) and Hirarc Method at Pt Xyz Jawa Timur Surabaya,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 4, no. 1, pp. 12–22, 2021.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
