The Effect of Liquid Coating Types on Gas Pipes on Surface Quality and Corrosion
Pengaruh Jenis Liquid Coating Pada Pipa Gas Terhadap Kualitas Permukaan Dan Korosi
DOI:
https://doi.org/10.21070/ups.7510Keywords:
Liquid Coating, Gas Pipes, Surface Quality, CorrosionAbstract
The use gas pipes is always used in large industries and households, including oil and gas industry. The main purpose using pipes to convey dangerous, volatile objects such fluids, gases, liquids even solids. The main opponent steel pipes corrosion, corrosion destruction damage material due to reaction with environment. In this research method, corrosion prevention process carried out with liquid coating using variations soaked in 100% HCL and buried in ground for corrosion process on specimen, using corrosion rate testing and surface roughness testing. Research conclusion that type liquid coating has significant influence on quality. surface and level corrosion on gas pipes. Epoxy paint shows best performance terms corrosion resistance and roughness test results lowest value. Primer paint better adhesion to pipe surface but less than optimal in terms corrosion resistance and roughness tests. Varnish paint tends to peel more easily and has high porosity and the highest roughness test results.
Downloads
References
S. Rifai dan S. , “Pengaruh Variasi Jenis Cat Primer dan Temperatur Terhadap Laju Korosi Pada Pengecatan Menggunakan Oven,” Automotive Science and Education Journal, pp. 11 - 17, 2021.
R. Fajariyanto, "Analisa laju korosi dengan menggunakan metode heat treatment pada material SS 15-5 dan SS 17-4," Technopex 2024 , 2024.
ABR Alvian dan E. Wismawati, “Analisa laju korosi dan perhitungan umur material baja karbon API 5L X52 pada pipa bawah laut,” Prosiding Konferensi Nasional Teknik Perpipaan dan Penerapannya ,Jil.9. Nomor 1, 2024.
A. Alvian, Analisa laju korosi, erosi dan perhitungan umur material carbon steel API 5L X52 pada pipa bawah laut Palang Station–Pipeline End Manifold , Dis. Politeknik Perkapalan Negeri Surabaya, 2024.
AB Aji, AWB Santosa, and IP Mulyatno, "Analisa pengaruh variasi ketebalan serta jenis pelapis pada pelat baja SS400 terhadap laju korosi dan uji adhesi," Jurnal Teknik Perkapalan , vol, 12.2, 2024.
Ikhsan, Nanda Teguh Salamatul. Analisa Ekstrak Daun Mangga sebagai Penghambat Laju Korosi dan Struktur Mikro dalam Pengujian Air Laut Di Kabupaten Probolinggo dengan menggunakan Pipa ASTM A53. Diss. Politeknik Negeri Jember, 2024.
MYN Rohmat, AA Rosidah, and N. Saidatin, “Pengaruh jumlah lapisan dan rasio coating epoxy pada pipa JIS G3141 terhadap ketebalan, kekasaran coating, dan laju korosi,” dalam Prosiding Seminar Nasional Sains dan Teknologi Terapan , no. 1 Agustus 2024.
Nugraha, Indra. Pengujian Alat Pelapisan Elektroplating Jalur Siklus Tertutup Aliran Tembus (Flow Trough Closed Loop Electroplating) Translucent Flow Closed Path Electroplating Coating Equipment Testing. Diss. Fakultas Teknik Unpas, 2024.
S. Sarifullah, Analisa uji kekerasan paku Pyton pada suhu pemanasan 400 ºC dengan metode Vickers menggunakan media pendingin yang berbeda. Dis. Universitas Islam Kalimantan MAB, 2024.
B. Muslim, F. Rahmadianto, "Studi eksperimental pengaruh tekanan penyemprotan pasir besi pada proses sandblasting terhadap kekerasan dan kekasaran permukaan baja ST 37 dengan menggunakan metode Taguchi," Jurnal Mesin Material Manufaktur dan Energi , vol. 329-33. 2024.
MZA Soleh dan M. Mulyadi, "Rancang bangun JIG pada pengelasan. gesek aduk menggunakan sambungan fillet pada material AA6061-T6," Jurnal Kajian Inovasi Indonesia , 14, 10-21070. 2021.
F. Riyanto, E. T. Belo, and A. Fahruddin, "Pengaruh Variasi Bentuk Impeller Terhadap Debit dan Tekanan Air pada Prototipe Pompa," REM (Rekayasa Energi Manufaktur), vol. 7, no. 1, 2022.
M. A. I. Muslim and Iswanto, “Pengaruh Parameter Pengelasan Pada Friction Stir Welding Terhadap Sifat Mekanik Polimer Jenis Polyethylene,” Progr. Stud. Tek. Mesin, Univ. Muhammadiyah Sidoarjo, pp. 1–9, 2023.
Mulyadi, R. Firdaus, and R. S. Untari, “Optimization of Friction Stir Welding Parameters for AA6061-T651 Aluminum Alloy: Defect Analysis and Process Improvement,” Acad. Open, vol. 8, no. 1, pp. 1–13, doi: 10.21070/acopen.8.2023.6665, 2023.
Wardana, A. I., & Mulyadi, M. Analysis of Underwater Friction Stir Welding (UFSW) Process Joint on AA6005-T6 Series Alumunium Alloy on Tensile Strength and Macro Structure: Analisa Sambungan Proses Underwater Friction Stir Welding (UFSW) pada Paduan Aluminium Seri AA6005-T6 terhadap Kuat Tarik dan Struktur Makro.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
