Numerical Model Analysis of Aluminium Composite Panel (ACP) with Core Material Variations on Temperature
Analisa Model Numerik Aluminium Composite Panel (ACP) dengan Variasi Material Inti terhadap Temperatur Suhu
DOI:
https://doi.org/10.21070/ups.7427Keywords:
Numerical, Analysis, Aluminium, Composite, Panel, Core, Material Core, temperaturAbstract
Aluminium composite panel (ACP) consists of two materials glued together through a pressing process between two aluminium plate sheets (top and bottom layers) and between them filled with polymer core material. This research analyses the effect of fire resistance on the core material variation of aluminium composite panel using Low Density Polyethylene (LDPE), PolyOxyMethylene (POM), PolytetraFluoroEthylene (PTFE), PolyEter ether Ketone (PEEK) with temperature variation at 150°C, 200°C, 250°C, 300°C, 350°C, 400°C, using numerical simulation with Ansys 2024 R2 software. Research results from the temperature variation of LDPE material at a temperature of 400 ° C maximum temperature 116.12 ° C, POM at a temperature of 400 ° C maximum temperature 185.24 ° C. PTFE temperature 400°C maximum temperature 299.95 ° C, PEEK temperature 400 ° C maximum temperature 289.78 ° C. It is appears that PEEK material is more fire resistant.
Downloads
References
S. Alfari, “Mengenal Alumunium Composite Panel (ACP) - ARSITAG,” 2018. [Daring]. Tersedia pada: https://www.arsitag.com/article/mengenal-alumunium-composite-panel-acp
N. White, “Fire performance and test methods for ACP external wall cladding,” no. May, 2020.
P. Mohaney dan E. G. Soni, “Aluminium Composite Panel as a Facade Material,” vol. 55, no. 2, hal. 75–80, 2018.
J. I. Duruaku, P. A. C. Okoye, N. H. Okoye, J. O. Nwadiogbu, V. I. Onwukeme, dan R. U. Arinze, “An Evaluation of the Physicochemical , Structural and Morphological Properties of Selected Tropical Wood Species for Possible Utilization in the Wood Industry,” J. Sustain. Bioenergy Syst., vol. 13, hal. 131–148, 2023, doi: 10.4236/jsbs.2023.134008.
M. Bonner dan G. Rein, “Flammability and multi-objective performance of building façades: Towards optimum design,” Int. J. High-Rise Build., vol. 7, no. 4, hal. 363–374, 2018, doi: 10.21022/IJHRB.2018.7.4.363.
P. H. Tjahjanti, Mulyadi, A. Zubaydi, dan S. H. Sujiatanti, “Finite element analysis of material AlSi10Mg(b) and AlSi10Mg(b)+SiC*15p,” J. Eng. Res., vol. 2019, no. October, hal. 50–56, 2019.
P. H. Tjahjanti dan S. H. Sujiatanti, “Application Analysis of Wall and Deck Numerical of Modelling Composite Ship EN AC-AlSi10Mg (b)+SiC*/15p By Using ANSYS ver. 12.0,” no. Icaise, hal. 217–221, 2013, doi: 10.2991/icaise.2013.46.
P. H. Tjahjanti, D. Manfaat, E. Panunggal, D. Darminto, dan W. H. Nugroho, “Numerical Modeling of Ship Composite-Based on Aluminum Casting as Alternative Materials for Ship Building,” Adv. Mater. Res., vol. 0, no. March 2016, hal. 143–150, 2013, doi: 10.4028/www.scientific.net/amr.0.143.
A. R. Nasution dan E. Widodo, “Numerical Analysis of Low Carbon Steel Tensile Strength Using Software (SolidWorks),” R.E.M. (Rekayasa Energi Manufaktur) J., vol. 7, no. 1, hal. 1–6, 2022, doi: 10.21070/r.e.m.v7i1.1629.
A. S. Nugroho, “Pengolahan Limbah Plastik Ldpe Dan Pp Untuk Bahan Bakar Dengan Cara Pirolisis,” J. Litbang Sukowati Media Penelit. dan Pengemb., vol. 4, no. 1, hal. 10, 2020, doi: 10.32630/sukowati.v4i1.166.
N. Inayah, “Journal Bearing Dengan Lapisan Pasta Pada Rotary Valve Mesin Pembuat Pasta,” hal. 63, 2015.
N. Uthaman, A. Majeed, dan Pandurangan, “Impact Modification of Polyoxymethylene (POM),” E-Polymers, no. 034, hal. 1–9, 2006, doi: 10.1515/epoly.2006.6.1.438.
D. P. Jones, D. C. Leach, dan D. R. Moore, “Mechanical properties of poly(ether-ether-ketone) for engineering applications,” Polymer (Guildf)., vol. 26, no. 9, hal. 1385–1393, 1985, doi: 10.1016/0032-3861(85)90316-7.
F. Jikol, M. Z. Akop, Y. M. Arifin, M. A. Salim, dan S. G. Herawan, “A Study of Steady-State Thermal Distribution on Circular Plate Using ANSYS,” Int. J. Nanoelectron. Mater., vol. 14, no. Special Issue ISSTE, hal. 479–488, 2021.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
