Identifying Work Risks In The Can Production Using The HIRADC and RCA Methods
Identifikasi Risiko Kerja Pada Proses Produksi Kaleng Menggunakan Metode HIRADC dan RCA
DOI:
https://doi.org/10.21070/ups.7369Keywords:
Work Accidents, HIRADC, RCA, Occupational Health and Safety (OHS), 5W1HAbstract
Every job carries the risk of workplace accidents, which may stem from production processes, worker negligence, or environmental conditions. Observations at PT. XYZ identified 25 workplace accident cases, representing 25% of the zero-accident target. This study analyzes occupational safety risks in can production using the HIRADC and RCA methods. Three high-risk hazards were found in the printing production stage, potentially causing fires, burns, respiratory issues, and skin irritation. Analysis using the fishbone diagram and 5 whys identified key accident factors, including a lack of safety policies, inadequate training, and an imbalance between cost efficiency and safety. The proposed solutions, based on the 5W1H method, include implementing occupational safety policies, conducting regular training, performing safety audits, and using thermocontrol technology. Implementing these measures successfully reduced high risks to a lower level, helping the company improve workplace safety standards and move closer to achieving the zero-accident target.
Downloads
References
D. A. Nugroho, T. Sukmono, and R. B. Jakaria, “Analysis of project work using earned value management and precedence diagram method in manufacturing system projects,” Oper. Excell. J. Appl. Ind. Eng., vol. 16, no. 2, p. 166, 2024, doi: 10.22441/oe.2024.v16.i2.114.
F. M. Zumala, “Analisis Risiko Keselamatan dan Kesehatan Kerja pada Pengrajin Tulakir Fiberglass,” J. Lentera Kesehat. Masy., vol. 2, no. 2, pp. 73–87, 2023, doi: 10.69883/jlkm.v2i2.28.
K. R. Ririh, “Analisis Risiko Kecelakaan Kerja Menggunakan Metode HIRARC dan Diagram Fishbone pada Lantai Produksi PT DRA Component Persada,” Go-Integratif J. Tek. Sist. dan Ind., vol. 2, no. 2, pp. 135–152, 2021, doi: 10.35261/gijtsi.v2i2.5658.
Direktorat Bina Penyelenggaraan Jasa Konstruksi, Manajemen Risiko K3 Konstruksi, no. January. Yogyakarta: K-Media, 2022. [Online]. Available: https://simantu.pu.go.id/epel/edok/9b7dd_Bahan_Tayang_Manajemen_Resiko_K3.pdf
K. P. T. Xyz, “Gambaran Risiko Bahaya Pada Area Engine Room KM Nggapulu Menggunakan Metode HIRADC dan Root Cause Analysis : Studi,” vol. 5, no. 1, pp. 28–41.
R. P. N. Simbolon, “Analisis Risiko Kecelakaan Kerja Pada Proses Fabrikasi di PT Binerkahan Henta Putra Menggunakan Metode HIRADC,” J. Syst. Eng. Manag., vol. 2, no. 2, p. 135, 2023, doi: 10.36055/joseam.v2i2.21684.
Radityazty Dahayu Nurhayati and Yayok Suryo Purnomo, “Analisis Risiko K3 dengan Metode HIRADC pada Industri Pengolahan Makanan Laut di Jawa Timur,” INSOLOGI J. Sains dan Teknol., vol. 2, no. 3, pp. 450–461, 2023, doi: 10.55123/insologi.v2i3.1883.
U. Nafa Khusufi, A. Hakim Zakkiy Fasya, D. Handayani, and S. Wijaya, “Literature Review: Using HIRADC Method Analyzing the Risk of Work Accidents in The Manufacturing Sector in Indonesia,” KESANS Int. J. Heal. Sci., vol. 2, no. 5, pp. 272–279, 2023, doi: 10.54543/kesans.v2i5.134.
Restu and F. Yuamita, “Analisis Risiko Potensi Kecelakaan Kerja Pada Pekerja Departemen Persiapan Produksi Menggunakan Metode HIRADC (Hazard Identification, Risk Assesment And Determining Control),” J. Teknol. dan Manaj. Ind. Terap., vol. 2, no. 3, pp. 159–167, 2023, doi: 10.55826/tmit.v2i3.63.
S. Hasiany, G. F. Difa, F. N. Awan, and B. Prasetio, “Wcej 1,” vol. 8, no. 1, pp. 1–5, 2024.
D. S. Marwah, M. Naufal, K. N. Zata, and M. F. Amri, “HIRADC dan HIRADC dalam proses industri dan manajemen risiko K3,” J. Disaster Manag. Community Resil., vol. 1, no. 1, pp. 19–27, 2024, doi: 10.61511/jdmcr.v1i1.603.
A. F. Rohman and B. I. Putra, “Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Proses Produksi Beton Dengan Metode JSA Dan Hirarc di PT Varia Usaha Beton,” Matrik J. Manaj. dan Tek. Ind. Produksi, vol. 24, no. 2, p. 209, 2024, doi: 10.30587/matrik.v24i2.7077.
R. Wardhana and Lukmandono, “Design Cost Control in Risk Management with the Expected Money Value (Emv) and Hirarc Method at Pt Xyz Jawa Timur Surabaya,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 4, no. 1, pp. 12–22, 2021, doi: 10.21070/prozima.v4i1.1276.
I. S. Haristama, A. Zacoeb, and L. Susanti, “Risk Analysis of Occupational Hazards Using HIRADC Approach in the Implementation of Occupational Safety and Health Management System,” J. Eng. Res. Reports, vol. 25, no. 6, pp. 28–39, 2023, doi: 10.9734/jerr/2023/v25i6940.
L. Kholida and S. Sumarmi, “Implementation of the HIRADC Method in Risk Analysis of Diaphragm Wall Work Projects,” J. Appl. Sci. Eng. Technol. Educ., vol. 5, no. 2, pp. 232–239, 2023, doi: 10.35877/454ri.asci2337.
R. Kristiana et al., Manajemen Risiko Cv. Mega Press Nusantara. 2022. [Online]. Available: www.megapress.co.id
F. Fadhilah, E. Amrina, and R. E. Gusvita, “Hazard Identification, Risk Assessment and Determining Control (HIRADC) in Mining Operations at PT Semen Padang,” Motiv. J. Mech. Electr. Ind. Eng., vol. 5, no. 3, pp. 473–484, 2023, doi: 10.46574/motivection.v5i3.249.
U. Marfuah, D. I. Sari, and N. Y. Pratomo, “Upaya Pengendalian Risiko Kecelakaan Kerja Tenaga Penunjang Perawat Dengan Penerapan Metode RCA dan HIRARC Pada Rumah Sakit Islam Jakarta Sukapura,” no. November, 2024.
M. Rizal, N. Kahfi, M. R. Dhani, and M. C. Rizal, “Analisis Kecelakaan Kerja Menggunakan Metode 5 Whys Analysis dan Fishbone pada Pekerjaan Preforming di Perusahaan Manufaktur Suku Cadang Otomotif,” no. 2581, 2024.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
