Analysis of Workplace Accident Potential in Divan Production Department Using Hazard Identification and Risk Assessment (HIRA) Method
Analisis Potensi Kecelakaan Kerja pada Departemen Produksi Divan dengan Metode Hazard Identification and Risk Assessment (HIRA)
DOI:
https://doi.org/10.21070/ups.7368Keywords:
Hira, Risk Control, , Risk Identification, Risk AssessementAbstract
During the 2023-2024 period, the productivity of divan production at PT. XYZ decreased by 4-10% from the monthly target due to a high frequency of work accidents, unsafe environmental conditions, and worker absenteeism caused by injuries and health issues. Supervisor records indicate 17 cases of major and minor accidents in the divan production process. This study aims to identify and prioritize potential work accidents and provide risk control recommendations using the Hazard Identification and Risk Assessment (HIRA) method. The results identified 17 potential work accidents across 17 stages of the production process, with two main priorities: finger cuts with risk scores of 20 and 15. Recommended controls include operator training, clear SOP development, periodic machine maintenance, and replacing cloth gloves with nitrile gloves. Implementing these measures is expected to minimize work accidents, create a safer working environment, and improve productivity.
Downloads
References
R. Darmawan, N. Ummi, dan A. Umyati, “Identifikasi Risiko Kecelakaan Kerja Dengan Metode Hazard Identification And Risk Assessment ( Hira ) Di Area Batching Plant Pt XyZ,” 2017.
S. Ismi Cahyani Ismail, N. S. Ayini Lalu, dan J. Kesehatan Masyarakat, “Analisis Potensi Bahaya Terhadap Kecelakaan Kerja Menggunakan Metode Hira (Hazard Identification And Risk Assesment) Pada Pekerja Tambang Emas Di Kecamatan Suwawa Timur Analysis Of Potential Hazards For Work Accidents Using The Hira (Hazard Identification And Risk Assessment) Method On Gold Mine Workers In East Suwawa District,” Journal Health & Science : Gorontalo Journal and Science Community, 2023,
M. B. Anthony, “Pengaruh Budaya 5R dan Kinerja Karyawan terhadap Lingkungan Kerja di Sinter Plant PT.XYZ,” Jurnal Media Teknik dan Sistem Industri, vol. 4, no. 2, hlm. 71, Sep 2020
D. Chandrahadinata, D. Rahmawati, dan H. Mulyadi, “Nomor 1 Program Sarjana Teknik Industri,” Universitas Kristen Maranatha, vol. 2, Des 2023.
M. Afif Maulana, E. Nursanti, S. Haryanto, dan P. Studi Teknik Industri S-, “Upaya Pencegahan Terjadinya Kecelakaan Kerja Di Bagian Produksi Pada Ud. Bashori Jaya Menggunakan Metode Hazard Identification And Risk Assessment (Hira),” Jurnal Mahasiswa Teknik Industri), vol. 5, no. 1, 2022.
O. O. Kurniawan, F. Yuamita, dan F. Yuamita, “Analisis K3 Di Pabrik Soun Acdc Kroya Menggunakan Metode Hira Dan Pengendalian Aktivitas Tinggi,” Jurnal Ilmiah Research And Development Student, vol. 2, no. 2, hlm. 180–193, Jun 2024,
F. Malikaz dkk., “Analisis Risiko Keselamatan dan Kesehatan Kerja pada Pengrajin Tulakir Fiberglass,” Jurnal Lentera Kesehatan Masyarakat, vol. 2, no. 2, hlm. 73–87, 2023,
M. N. Aini dan A. Nuryono, “Analisis Bahaya dan Risiko Kerja di Industri Pengolahan Teh dengan Metode HIRA atau IBPR,” Jun 2020.
Fatma, N dan M. Putra, “Usulan Perbaikan Pada Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Di PT. Surya Toto Indonesia Tbk Divisi Sanitary Dengan Metode HIRA Dan FTA,” Journal Industrial Manufacturing, vol. 6, no. 1, hlm. 27–42, Feb 2021.
A. Qutrunnada, A. Nirmala, dan R. Aprillia, “Identifikasi Bahaya dan Risiko Menggunakan Metode Job Hazard Analysis (JHA) di Washing Plant Pertambangan Bauksit PT. Kurnia Jaya Raya Kabupaten Sanggau,” 2023.
D. Abiansyah, A. Kusumawati, dan G. Ramayanti, “Analisis Potensi Bahaya Menggunakan Metode Hazard Identification Risk Assesment di Area Gudang,” 2024.
G. M. Krida dan A. J. Nugroho, “Analisis Kesehatan Dan Keselamatan Kerja Pada Produksi Pabrik Tahu Pak Rahman Denganmenggunakan Metode Hazard Identification And Risk Assesment (Hira)” Jurnal Ilmiah Nusantara ( JINU), Vol.1, No.4 Juli 2024
A. Salim dan A. Siswanto, “Manajemen Risiko K3 Konstruksi,” Semarang, Des 2022. [
A. F. Rohman dan B. I. Putra, “Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Proses Produksi Beton Dengan Metode JSA Dan Hirarc di PT Varia Usaha Beton,” : Jurnal Manajemen & Teknik Industri, vol. XXIV, Mar 2024.
M. Rahmadaniel Yasmi, E. Amrullah, dan R. Rian Zeva, “Implementasi Metode Hira Dan Hazop Untuk Meminimalisir Potensi Bahaya Kesehatan Dan Keselamatan Kerja Pada Industri Furnitur,” 2024.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
