Analysis of Pressure an a Pokka 5001 Type Condenser With Finned Tube on Heat Transfer Rate
Analisa Tekanan Kondensor Tipe Pokka 5001 Jenis Finned Tube Terhadap Laju Perpindahan Panas
DOI:
https://doi.org/10.21070/ups.7290Keywords:
Condensor Eficiency, Heat TransferAbstract
Converts steam into liquid through the condensation process. This study aims to analyze the efficiency and heat transfer rate of the condenser based on the main thermal parameters, such as temperature, pressure, and flow rate of the working fluid with efficiency and flow rate tested to understand its effect on the type condenser pokka 5001 with fan support at 3500rpm. Vaiables are free to use pressure variations (20, 25, 30, 35 and 40 Psi), while the trirate variable is the heat transfer rate and efficiency in the condenser. The results of the study in the condenser efficiency test increased as the pressure on the pressure gauge in the boiler furnace increased from η_1 = (73.17 %), η_2 = (76.49 %), η_3= (81.49 %), η_4= (89.65 %), and at η_5 = (89.68 %). It can be concluded that the greater the incoming pressure, the greater the efficiency that occurs
Downloads
References
J. Power Plant And A. Reza Effendi, “Analisis Perubahan Tekanan Vakum Kondensor Terhadap Kerja Turbin Dan Produksi Listrik Pltu Unit 1 Sebalang Menggunakan Simulasi Cycle Tempo,” Jurnal Power Plant, Vol. 8, No. 1, 2020, Doi: 10.33322/Powerplant.V8i1.1047.
A. L. S. Haans, A. K. Razak, H. Habibi, N. Ilham, And D. Gracecia, “Rancang Bangun Mesin Pengupas Sabut Kelapa,” Jurnal Sinergi Jurusan Teknik Mesin, Vol. 16, No. 1, P. 1, May 2019, Doi: 10.31963/Sinergi.V16i1.1196.
R. Fan Akbari, Y. Sirodz Gaos, And T. Hafzara Siregar, “Analisis Kinerja Kondensor Pada Sistem Pendingin Water Chiller Kapasitas 300 Tr,” Vol. 3, No. 4, 2021.
J. Vokasi Teknik, A. Laju Perpindahan Kalor Pada Alat Penukar Panas Kondensor, And E. Pardede, “Attribution-Sharealike 4.0 International Some Rights Reserved Teknik Mesin”, Doi: 10.12345/Xxxxx.
K. H. Mahmud, “Pengaruh Variasi Temperatur Air Pendingin Kondensor Terhadap Tekanan Pada Beban Tetap.”
Ir. S. S. M. T. Daniswara Dwinata La, “Analisis Pengaruh Kevakuman Kondensor Terhadap Laju Perpindahan Panas Dan Efektivitas Pada Pltu,” Http://Etd.Repository.Ugm.Ac.Id/, 2015.
I. D. Alber And N. Sinaga, “Analisis Pengaruh Perubahan Tekanan Vakum Kondensor Terhadap Efesiensi Dan Heat Rate Turbin Uap Di Pltu Kendari-3 Unit 2,” Jurnal Simetris, Vol. 12, No. 2, 2021.
M. A’rasy Fahruddin1, “Rancang Bangun Alat Uji Head Losses Dengan Variasi Debit Dan Jarak Elbow 90 O Untuk Sistem Perpipaan Yang Efisien”.
D. Mugisidi, A. Fajar, And Dan Oktarina Heriyani, “Peningkatan Efisiensi Dan Efektivitas Kondensor Pada Solar Still Increasing The Efficiency And Effectiveness Of The Condensor On The Solar Still.”
A. Ahmad And S. Anis, “Pengaruh Debit Air Pendingin Dan Posisi Kondensor Terhadap Hasil Kondensasi Pirolisis Getah Pinus,” 2020.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
