Re-planning the Layout of the Packaging Machine Production Area Using the Activity Relationship Chart and Corelap Method
Perencanaan Ulang Tata Letak Area Produksi Mesin Packaging Menggunakan Metode Activity Relationship Chart dan Corelap
DOI:
https://doi.org/10.21070/ups.7157Keywords:
Packaging Machine, Relayout, Activity Relationship Chart, CorelapAbstract
PT. Nobelindo is a company specializing in the manufacturing of processing and packaging machines tailored to customer needs. To meet customer demands, efficient processing equipment is essential to support material handling. One way to enhance material handling is through facility layout planning. The current facility layout is considered inefficient, as the distance workers must travel to the warehouse is too far, requiring each department to make 2-4 trips per day, with a total material handling distance of 110 meters. This study aims to redesign the facility layout to optimize the production flow by considering the flow of production and distances between production areas to achieve better efficiency using the Activity Relationship Chart and Corelap methods. The results show a total material handling distance of 59 meters, achieving an efficiency improvement of 46.3%. Therefore, this redesigned facility layout can serve as an alternative for PT. Nobelindo to optimize material handling processes.
Downloads
References
A. Suryaatmaja and V. Eka Pridianata, “Hubungan antara Masa Kerja, Beban Kerja, Intensitas Kebisingan dengan Kelelahan Kerja di PT Nobelindo Sidoarjo,” Journal of Health Science and Prevention, vol. 4, no. 1, pp. 14–22, Apr. 2020, doi: 10.29080/jhsp.v4i1.257.
H. H. Hidayat, N. Wijayanti, and A. Prasetyo, “Peningkatan Produktivitas dengan Relayout Area Produksi di UKM Keripik Tempe (Studi Kasus di UKM Suka Nicky, Banjarnegara),” JIA (Jurnal Ilmiah Agribisnis) : Jurnal Agribisnis dan Ilmu Sosial Ekonomi Pertanian, vol. 5, no. 6, p. 199, Dec. 2020, doi: 10.37149/jia.v5i6.14994.
B. Aulia et al., “Analisis Tata Letak Fasilitas Toko Prima Freshmart SV IPB Melalui Metode Activity Relationship Chart (ARC) Dan Total Closeness Rating (TCR),” Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), vol. 2, no. 2, pp. 128–134, 2023.
O. Adiyanto and A. F. Clistia, “PERANCANGAN ULANG TATA LETAK FASILITAS PRODUKSI UKM EKO BUBUT DENGAN METODE COMPUTERIZED RELATIONSHIP LAYOUT PLANNING (CORELAP),” JISI: Jurnal Integrasi Sistem Industri, vol. 7, no. 1, p. 49, May 2020, doi: 10.24853/jisi.7.1.49-56.
M. A. Daya, F. D. Sitania, and A. Profita, “Perancangan Ulang (re-layout) tata letak fasilitas produksi dengan metode blocplan (studi kasus: ukm roti rizki, Bontang),” PERFORMA Media Ilmiah Teknik Industri, vol. 17, no. 2, Jul. 2019, doi: 10.20961/performa.17.2.29664.
P. Anggela and I. Sujana, “REDESIGN TATA LETAK FASILITAS MENGGUNAKAN METODE ACTIVITY RELATIONSHIP CHART DAN ALGORITMA BLOCPLAN PADA PABRIK XYZ,” 2022. [Online]. Available: https://jurnal.untan.ac.id/index.php/jtinUNTAN/issue/view/
A. Dwi Budianto and A. Sidhi Cahyana, “RE-LAYOUT TATA LETAK FASILITAS PRODUKSI IMITASI PVC DENGAN MENGGUNAKAN METODE SYSTEMATIC LAYOUT PLANNING,” Jurnal DINAMIKA TEKNIK, vol. IV, no. 2, pp. 23–32, 2021.
E. Rengganis et al., “Re-Layout Penempatan Fasilitas Produksi dengan menggunakan Metode Systematic Layout Planning dan Metode 5 S Guna Meminimalkan Biaya Material Handling,” Jurnal Rekayasa Industri (JRI), vol. 3, no. 1, 2021.
F. E. Susanto and Rusindayanto, “Analysis of Factory Facility Layout Design Using the Craft Algorithm Method At Pt. Focus on Ciptamakmur Bersama, Blitar,” PROZIMA (Productivity, Optimization and Manufacturing System Engineering), vol. 3, no. 2, pp. 1–13, Mar. 2021, doi: 10.21070/prozima.v3i2.1267.
F. Amelia et al., “Perancangan Ulang Tata Letak Fasilitas Melalui Metode Activity Relationship Chart (ARC) Dan Activity Relationship Diagram (ARD) (Studi Kasus UKM Tahu Baso Miwiti),” Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), vol. 3, no. 2, pp. 171–180, 2024.
F. Vitria Sari et al., “ANALISIS PERANCANGAN TATA LETAK LAHAN PAGI FARM DENGAN METODE ACTIVITY RELATIONSHIP CHART (ARC) DAN TOTAL CLOSENESS RATING (TCR),” Neraca Manajemen, Ekonomi, vol. 5, 2024, doi: 10.8734/mnmae.v1i2.359.
rika A. Hadiguna and H. Setiawan, Tata Letak Pabrik. ANDI Yogyakarta, 2008.
Y. Suryana and M. Hilman, “INTRIGA : INFO TEKNIK INDUSTRI GALUH Jurnal Mahasiswa Teknik In dustri BINA NETRAL GARUDA JAYA KABUPATEN CIAMIS,” INTRIGA : INFO TEKNIK INDUSTRI GALUH Jurnal Mahasiswa Teknik Indust ri, vol. 2, no. 1, pp. 71–80, 2024.
sritomo wigjosoebroto, TATA LETAK PABRIK DAN PEMINDAHAN BARANG, 3rd ed. Guna Widya, 1996.
Kadek Yaniza Ayu Tantri Devi and R. Prabowo, “Desain Optimal Tata Letak Fasilitas Dengan Menggunakan Metode CORELAP dan Algoritma CRAFT,” Jurnal Teknik, vol. 21, no. 2, pp. 208–216, Dec. 2023, doi: 10.37031/jt.v21i2.385.
J. Hasil, K. Ilmiah, G. N. Siswoyo, P. Mulyatno, A. Wibawa, and B. Santosa, “JURNAL TEKNIK PERKAPALAN Design Interior dan Re-layout Ruang Akomodasi dengan Metode CORELAP pada Kapal Ro-Pax 10000 GT,” Jurnal Teknik Perkapalan, vol. 11, no. 4, 2023, [Online]. Available: https://ejournal3.undip.ac.id/index.php/naval
Rahmadani, “Perancangan Ulang Tata Letak Gudang Menggunakan Metode Konvensional, Corelap Dan Simulasi Promodel,” Jurnal Optimasi Teknik Industri, vol. 2, no. 1, pp. 13–18, 2020.
A. Sugiyono, “BUKU AJAR PERENCANAAN TATA LETAK FASILITAS( PTLF ),” 2018.
N. A. Khofiyah, M. Rizki, B. Gea, T. N. Wiyatno, and Supriyati, “Evaluasi Tata Letak Fasilitas Pabrik untuk Meningkatkan Efisiensi Kinerja Menggunakan Metode SLP (Systematic Layout Planning): Studi Kasus PT. XYZ,” G-Tech: Jurnal Teknologi Terapan, vol. 7, no. 4, pp. 1633–1642, Oct. 2023, doi: 10.33379/gtech.v7i4.3269.
T. Rachman, C. Apriando, M. Derajat Amperajaya, and A. Suwandi, “Peningkatan Efisiensi Penanganan Material Melalui Perancangan Tata Letak Fasilitas dengan Integrasi Metode Konvensional Tata Letak dan Algoritma CORELAP.” [Online]. Available: http://ejournal.atmajaya.ac.id/index.php/metris
S. Zahrotun Nisa’ and W. Setiafindari, “Perancangan Ulang Tata Letak Fasilitas Untuk Meminimalkan Jarak Material Handling Menggunakan Algoritma CORELAP,” Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), vol. 2, no. 4, pp. 250–260, 2023.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
