Relayout of Cracker Factory Using Activity Relationship Chart and Blocplan Methods
Relayout Pabrik Kerupuk dengan Menggunakan Metode Activity Relationship Chart dan Blocplan
DOI:
https://doi.org/10.21070/ups.7151Keywords:
Relayout, Crackers, Activity Relationship Chart, BlocplanAbstract
Sumber Rezeki is an industry that focuses on the production of crackers. The problem faced by UD. Sumber Rezeki is that the capacity of the raw material warehouse and the finished material warehouse is insufficient due to an increase in production volume from 4 tons per day to 6 tons per day, therefore an expansion of the area and the addition of departments are needed. The purpose of this research is to improve operational efficiency between areas and optimize UD factory relayout. Sumber Rezeki. The methods used are Activity Relationship Chart (ARC) and Blocplan. By using these methods, the most efficient layout proposal from Blocplan is obtained with an adj score of 0.68 and an r-score of 0.77.
Downloads
References
A. H. Aji Bagas and M. Irjayanti, “Analisis Perancangan Tata Letak Pabrik Kopi Java Preanger Gunung Tilu Menggunakan Metode Activity Relationship Chart (ARC),” Review of Accounting & Business, vol. 4, no. 1, pp. 1–16, 2023.
M. Rizky Bayu Samudra, “Analisa Tata Letak Fasilitas Produksi Menggunakan Metode Activity Relationship Chart (ARC) Di PT Bimuda Karya Teknik Tegal,” Idea Sakti Journal, vol. 2, no. 2, pp. 34–43, 2023.
I. Adiasa and N. Hudaningsih, “Perancangan Tata Letak Fasilitas Gudang Pada Proyek Pembangunan Jetty PLTMGU Lombok Peaker menggunakan Metode Systematic Layout Planning (SLP) dengan Algoritma Blocplan,” Jurnal Informatika Teknologi dan Sains, vol. 5, no. 1, pp. 202–209, 2023.
Y. Maulana and Taufik, “Perancangan Tata Letak Proses Produksi Kursi Furnitur Menggunakan Metode Activity Relationship Chart (ARC) di PT. Rama Teknik,” Jurnal Optimalisasi, vol. 10, no. 01, pp. 61–68, 2024.
A. Nasution and B. Anugerah, “Relayout Keseluruhan Pabrik PT. Industri Nabati Lestari Dengan BLOCPLAN Tool Analysis,” Jurnal SIstem Teknik Industri (JSTI), vol. 22, no. 1, pp. 15–21, 2020.
D. Nur, A. Firdasafitri, and Z. Arief, “Re-Layout Gudang Produk Jadi Sak Semen Dengan Menggunakan Metode Share Storage Area Packer Tuban IV Pada PT. Semen Indonesia (PERSERO) TBK,” Jurnal Ilmiah Teknik dan Manajemen Industri, vol. 3, no. 1, pp. 744–752, 2023, doi: 10.46306/tgc.v3i1.
A. Yulistio, M. Basuki, and A. Azhari, “Perancangan Ulang Tata Letak Display Retail Fashion Menggunakan Activity Relationship Chart (ARC),” Jurnal Ilmiah Teknik Industri, vol. 10, no. 1, pp. 21–30, 2022, doi: 10.24912/jitiuntar.v10i1.9388.
J. M. Apple, Tataletak Pabrik dan Pemindahan Bahan . Bandung: ITB , 1990.
A. Baihaqi, D. P. Rahmawati, L. A. Syukur, O. T. Livia, S. Dwina Hutapea, and S. A. Yusmar, “SAINS: Jurnal Manajemen dan Bisnis Evaluasi Tata Letak Fasilitas Toko Retail Indomaret dengan Menggunakan Metode Activity Relationship Chart (ARC),” Jurnal Manajemen dan Bisnis, vol. 15, no. 2, pp. 209–222, 2023, [Online]. Available: http://jurnal.untirta.ac.id/index.php/jsm
Rizky Fadilla A and Ayu Wulandari P, “Literatur Review Analisis Data Kualitatif: Tahap Pengumpulan Data,” Jurnal Penelitian, vol. 1, no. 3, pp. 34–46, 2023.
Y. Muharni, “Perancangan Tata Letak Fasilitas Gudang Hot Strip Mill Menggunakan Metode Activity Relationship Chart dan Blocplan,” Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, vol. 8, no. 1, pp. 44–51, 2022, doi: 10.24014/jti.v7i2.11526.
D. Ariyanto, C. Widhiyanto, S. Albern, and Suseno, “Perbaikan Tata Letak Penyimpanan dengan Metode Class Based Stotage, Blocplan, dan Dedicated Storage pada RSPAU Hardjolukito,” Jurnal Ilmiah Teknik Industri dan Inovasi, vol. 1, no. 2, pp. 16–25, 2023, doi: 10.59024/jisi.v1i2.411.
M. Milzam Abdurrahmad, R. Kastaman, and Totok Pujianto, “Rancang Ulang Tata Letak Fasilitas Produksi untuk Efisiensi Produksi Kopi di PT Sinar Mayang Lestari Menggunakan Metode Systematic Layout Planning dan Software Blocplan,” Jurnal Agrikultura, vol. 2021, no. 2, pp. 146–157, 2021.
A. Rozak, A. D. Kristanto, G. S. Raharjo, and N. A. Saleh, “Penerapan ARC dan ARD untuk Membuat Rancangan Layout Fasilitas pada Pabrik Kerupuk Menggunakan BLOCPLAN Di CV Arto Moro,” Bulletin of Applied Industrial Engineering Theory, vol. 2, no. 2, pp. 145–149, 2021.
Kholifah U. and Suhartini, “Perancangan Ulang Tata Letak Fasilitas Produksi dengan Metode Systematic Layout Planning dan BLOCPLAN untuk Meminimasi Biaya Material Handling pada UD. Sofi Garmen,” Journal of Research and Technology, vol. 7, no. 2, pp. 151–162, 2021.
J. Immanuel, Amelia Santoso, and Markus Hartono, “Analisis perancangan tata letak fasilitas di perusahaan XYZ produksi kedelai dengan systematic layout planning,” JENIUS : Jurnal Terapan Teknik Industri, vol. 4, no. 2, pp. 250–261, Nov. 2023, doi: 10.37373/jenius.v4i2.555.
A. F. Islaha and A. S. Cahyana, “Upaya Peningkatan Produktivitas Dengan Meminimasi Waste Menggunakan From To Chart (FTC),” PROZIMA (Productivity, Optimization and Manufacturing System Engineering), vol. 1, no. 2, pp. 107–115, 2017, doi: 10.21070/prozima.v1i2.1289.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
