Evaluation of Factors Causing Downtime with OEE and FMEA Approaches in the MGTR-RF15 Machine Production Process
Evaluasi Faktor Penyebab Downtime dengan Pendekatan OEE dan FMEA pada Proses Produksi Mesin MGTR-RF15
DOI:
https://doi.org/10.21070/ups.7125Keywords:
Downtime, FMEA, OEE, Rewinder Machine, RMPAbstract
This research evaluates the efficiency of the MGTR-RF15 machine at RMP that focuses on raffia packing. In the last 6 months, MGTR-RF15 has experienced 100 times downtime which has caused the production process to stop temporarily, hampering the fulfillment of customer requests and increasing logistics costs. This study aims to determine the level of machine efficiency, determine the cause of the highest risk, and provide alternative suggestions for improvement. This research uses the Overall Equipment Effectiveness (OEE) and Failure Mode and Effect Analysis (FMEA) approaches. MGTR-1F15 OEE value of 82.91% is below international standards with availability as the dominant factor affecting efficiency. The FMEA identified the bent strap clamp iron as the critical failure with the highest risk worth RPN 280. Root Cause Analysis (RCA) shows the root cause of the downtime problem so that alternative recommended improvements include routine training, implementation SOPs, inspection raw materials, and selecting high-quality suppliers.
Downloads
References
Sukarmansyah, R. M. Veranika, M. A. Fauzie, H. Ali, and K. Salman, “Evaluasi Kualitas Ruang Terbuka Publik Menggunakan Good Public Space Index di Kota Palembang,” J. Desiminasi Teknol., vol. 9, no. 2, pp. 92–165, 2021.
Mohamad Faris Rahmadsyah and Moch. Tutuk Safirin, “Analisis Perbaikan Downtime Mesin Injection Molding dengan Pendekatan DMAIC di PT XYZ,” Jupit. Publ. Ilmu Keteknikan Ind. Tek. Elektro Dan Inform., vol. 2, no. 1, pp. 25–34, Jan. 2024, doi: 10.61132/jupiter.v2i1.39.
N. H. Ummah and S. S. Dahda, “Analisis Efektifitas Kinerja Mesin Cutting Manual Dan Otomatis Menggunakan Metode OEE (Overall Equipment Effectiveness ) Di PT. XYZ,” J. Tek. Ind., vol. 8, no. 2, pp. 345–354, Dec. 2022, doi: 10.24014/jti.v8i2.19765.
I. K. Wardani, F. T. Dwi Atmaji, and J. Alhilman, “Pengukuran dan analisa efektivitas mesin pencetak paving menggunakan metode overall equipment effectiveness (OEE),” J. Ind. Serv., vol. 7, no. 1, pp. 125–132, Nov. 2021, doi: 10.36055/jiss.v7i1.12336.
Y. Kharisma and F. Fitriana, “Penerapan Metode Overall Equipment Effectiveness (OEE) Dan Failure Mode And Effect Analysis (FMEA) Pada Mesin Smcd 6 di PT.X,” J. Ilm. Sains Dan Teknol., vol. 2, no. 9, pp. 128–141, 2024.
Wahyu Adji Sulistiyono and Joumil Aidil Saifuddin, “Pengendalian Kualitas dengan Metode Failure Mode and Effect Analysis (FMEA) Pada Pembongkaran Bahan Baku Impor di PT X,” Sammajiva J. Penelit. Bisnis Dan Manaj., vol. 2, no. 1, pp. 30–38, Jan. 2024, doi: 10.47861/sammajiva.v2i1.752.
I. S. Haq and M. A. Purba, “Kajian Penyebab Kerusakan Door Packing pada Tabung Sterilizer Menggunakan Metode Root Cause Analysis (RCA) di Sungai Kupang Mill,” J. VOKASI Teknol. Ind. JVTI, vol. 2, no. 2, pp. 1–8, Dec. 2020, doi: 10.36870/jvti.v2i2.177.
M. D. Susanto, D. Andesta, and Moh. Jufriyanto, “Analisis Efektivitas Mesin Injection Moulding Menggunakan Metode OEE dan FMEA (Studi Kasus di PT. Cahaya Bintang Plastindo),” J. Sist. Dan Tek. Ind., vol. 2, no. 3, pp. 411–421, Apr. 2022, doi: 10.30587/justicb.v2i3.3685.
W. Sukmoro, OEE Demistifikasi, 1st ed. Bekasi: PT. Mitra Prima Produktivitas, 2023.
Moh. A. Pradaka and J. Aidil Szs, “Analisis Total Productive Maintenance Menggunakan Metode OEE dan FMEA pada Pabrik Phosporic Acid PT Petrokimia Gresik,” J. Tek. Ind., vol. 11, no. 3, pp. 280–289, Dec. 2021, doi: 10.25105/jti.v11i3.13087.
V. I. Lestari and J. A. Suryadi, “Analisis Efektivitas Mesin Pada Stasiun Ketel Dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) di PT. XYZ,” Tekmapro J. Ind. Eng. Manag., vol. 16, no. 2, pp. 36–47, Jul. 2021, doi: 10.33005/tekmapro.v16i2.240.
Z. Arifin, St., Mt, “Implementasi Overall Equipment Effectiveness ( OEE ) Dalam Penerapan Metode Total Productive Maintenance (TPM) di PT. FJT,” PROFISIENSI J. Program Studi Tek. Ind., vol. 8, no. 1, pp. 55–63, Jul. 2020, doi: 10.33373/profis.v8i1.2579.
F. M. Taufik, G. N. Puri, M. Meidina, and R. M. Zidan, “Analisa Pengukuran Efektivitas Mesin Pada Proses Filling Menggunakan Metode Overall Equipment Efectiveness (OEE) & Six Big Losses di PT Sanbe Farma Bandung,” J. Ilm. Stat. Dan Ekon., vol. 3, no. 1, pp. 28–37, 2023.
A. Permana, “Analisis Pengukuran Efektivitas Pengolahan Minyak Bumi dengan Penerapan Metode Overall Equipment Effectivenss (OEE) (Studi Kasus: PPSDM Migas Cepu),” Maj. Ilm. Swara Patra, vol. 14, no. 1, pp. 21–30, Mar. 2024, doi: 10.37525/sp/2024-1/493.
J. Jono, “Total Productive Maintenance (TPM) pada Perawatan Mesin Boiler Menggunakan Metode Overall Equipment Eff ectiveness (OEE),” Tekinfo J. Ilm. Tek. Ind. Dan Inf., vol. 3, no. 2, pp. 47–62, 2015.
A. Oktafianto and D. P. Sari, “Analisis Efektifitas Mesin Berdasarkan Perhitungan Nilai Overall Equipment Effectiveness pada Mesin Pembuat Rokok ( Single Procession Unit 02 dan Single Procession Unit 03 ) di PT Djarum,” Ind. Eng. Online J., vol. 6, no. 4, pp. 1–11, 2018.
I. D. Pranowo, Sistem dan Manajemen Pemeliharaan (Maintenance: System and Management), 1st ed. Yogyakarta: Deepublish, 2019.
A. W. Wicaksono and F. Yuamita, “Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode and Effect Analysis (FMEA) Untuk Meminimumkan Cacat Kaleng Di PT. Maya Food Industries,” J. Teknol. Dan Manaj. Ind. Terap., vol. 1, no. I, pp. 1–6, Mar. 2022, doi: 10.55826/tmit.v1iI.6.
H. I. Madyantoro, A. Adib, R. I. Yaqin, and J. P. Siahaan, “Penerapan Metode FMEA dalam Perawatan Mesin Pendingin Kapal Penangkap Ikan (Studi Kasus: KM. Sinar Bayu Utama),” Authentic Res. Glob. Fish. Appl. J., vol. 4, no. 1, pp. 97–106, 2022.
J. Sidik, W. Andalia, and T. Tamalika, “Identifikasi Perawatan Mesin Press Hidrolik Dengan Menggunakan Metode FMEA dan FTA (Studi Kasus di Bengkel Cahaya Ilahi),” Jambura Ind. Rev. JIREV, vol. 2, no. 2, pp. 57–64, Jan. 2023, doi: 10.37905/jirev.v2i2.16629.
S. Kurniawan, I. Apriliana Sari Wulandari, and T. Sukmono, “Optimalisasi Preventive Maintenance Ground Power Unit pada Perawatan Pesawat Udara di PT. IAA AMO Menggunakan Metode FMEA,” JATI UNIK J. Ilm. Tek. Dan Manaj. Ind., vol. 8, no. 1, pp. 1–11, Oct. 2024, doi: 10.30737/jatiunik.v8i1.5535.
W. Widhianingsih and H. C. Wahyuni, “Strategi Peningkatan Kualitas Sepatu dengan Metode Failure Mode and Effect Analysis, Grey Relational Analysis, dan Root Cause Analysis,” Innov. Technol. Methodical Res. J., vol. 3, no. 3, pp. 1–17, 2024.
P. B. Sugiharto, “Analisis Perbaikan Defect Pada Produk Bata Ringan dengan Menggunakan Metode RCA (Root Cause Analysis) Pada Salah Satu Perusahaan Bata Ringan di Serang Timur,” J. Ilm. Tek. Dan Manaj. Ind., vol. 3, no. 1, pp. 157–170, 2023.
M. I. Monoarfa, Y. Hariyanto, and A. Rasyid, “Analisis Penyebab Bottleneck pada Aliran Produksi Briquette Charcoal dengan Menggunakan Diagram Tulang Ikan,” Jambura Ind. Rev., vol. 1, no. 1, pp. 15–21, 2021.
D. Rusdiana and O. A. Fitra, “Artikel Penelitian Analisa Manajemen Resiko Laboratorium Farmasetika Untuk Persyaratan ISO 9001:2015 Menggunakan Metode 5 Why Analysis,” J. Farm. Indones., vol. 4, no. 1, pp. 41–47, 2023.
H. Ardy and W. Widiasih, “Analysis of Bolt Former Machine Effectiveness Using Overall Equipment Effectiveness (OEE) and Six Big Lossess,” PROZIMA Product. Optim. Manuf. Syst. Eng., vol. 8, no. 1, pp. 25–34, Jun. 2024, doi: 10.21070/prozima.v8i1.1688.
I. M. Fahturizal, I. Zulkarnaen, Y. Fauziyah, and H. Kurnia, “Penerapan Metode Soft System Methodology Pada Peningkatan Produktivitas di Industri Manufaktur Indonesia,” J. Kalibr. - Karya Lintas Ilmu Bid. Rekayasa Arsit. Sipil Ind., vol. 6, no. 2, pp. 70–81, Sep. 2023, doi: 10.37721/kalibrasi.v6i2.1190.
P. A. Wibowo and I. Padilah, “Analisis Overall Equipment Effectiveness (OEE) dan Six Big Losses Pada Mesin Length Adjusment Line 3 Departemen Belt Assy PT XYZ,” J. Teknol. Terap., vol. 7, no. 2, pp. 439–449, 2023.
I. Pamungkas, H. Tri Irawan, K. Hadi, and Arhami, “Review Penggunaan Metode Pengendalian Kualitas pada Proses Manufaktur Kapal,” J. Teknol. Dan Manaj. Ind. Terap., vol. 2, no. 4, pp. 261–268, Dec. 2023, doi: 10.55826/tmit.v2i4.284.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
