Analysis of Work Accident Risk Control in Warehouse Transit Using HIRARC and FTA Methods
Analisis Pengendalian Risiko Kecelakaan Kerja pada Warehouse Transit Menggunakan Metode HIRARC dan FTA
DOI:
https://doi.org/10.21070/ups.7120Keywords:
Risk Control, K3, HIRARC, FTAAbstract
In every work process in the Transit Warehouse, work accidents often occur such as bruised hands due to being caught by heavy spare parts and wounds on the hands due to being scratched by spare parts caused by workers not complying with SOPs and not using PPE. So it is necessary to carry out risk control to prevent work accidents. The purpose of the study was to identify risk factors, determine the level of risk, and determine the right risk control proposal strategy and. The results obtained were 19 risks in the low category and 3 risks in the moderate category. The proposed control strategy was carried out by ensuring that PPE stock was always available, requiring workers to always wear PPE, reminding workers to comply with SOPs and more supervision on jobs that have a high chance of work accidents
Downloads
References
K. R. Ririh, “Analisis Risiko Kecelakaan Kerja Menggunakan Metode HIRARC dan Diagram Fishbone pada Lantai Produksi PT DRA Component Persada,” Go-Integratif J. Tek. Sist. dan Ind., vol. 2, no. 2, pp. 135–152, 2021, doi: 10.35261/gijtsi.v2i2.5658.
I. Marodiyah, A. Sidhi Cahyana, and I. R. Nurmalasari, “Analisis Risiko Pada Proses Tanam Tebu Di Kabupaten Sidoarjo,” Proc. 1st SENARA , vol. 0672, no. 1, pp. 1087–1091, 2022, [Online]. Available: https://pssh.umsida.ac.id.
N. Karanikas and H. Zerguine, “Redefining health, risk, and safety for occupational settings: A mixed-methods study,” Saf. Sci., vol. 181, no. October 2024, p. 106698, 2025, doi: 10.1016/j.ssci.2024.106698.
A. P. Pribadi, Y. M. R. Rahman, and C. D. A. B. Silalahi, “Analysis of the effectiveness and user experience of employing virtual reality to enhance the efficacy of occupational safety and health learning for electrical workers and graduate students,” Heliyon, vol. 10, no. 15, p. e34918, 2024, doi: 10.1016/j.heliyon.2024.e34918.
S. T. Odonkor and A. M. Sallar, “Occupational health and safety knowledge, attitudes and practices among healthcare workers in Accra Ghana,” Sci. African, vol. 24, p. e02130, 2024, doi: 10.1016/j.sciaf.2024.e02130.
L. Willy Afredo, “Analisis Resiko Kecelakaan Kerja di CV. Jati Jepara Furniture dengan Metode HIRARC (Hazard Identification Risk Assessment and Risk Control),” J. Ilm. Tek. Ind. Prima (JURITI PRIMA), vol. 4, no. 2, 2021, doi: 10.34012/juritiprima.v4i2.1816.
F. I. Almaeda and M. Basuki, “Penilaian risiko operasional proses pembangunan kapal wisata trimaran,” Semit. (Jurnal Sumberd. Bumi Berkelanjutan), vol. 1, no. 1, pp. 127–135, 2022, [Online]. Available: https://ejurnal.itats.ac.id/jsemitan/article/view/4992/3394
A. A. Hidayat, “Analisis Program Keselamatan Kerja dalam Usaha Meningkatkan Produktivitas Kerja dengan Pendekatan HIRARC dan FTA ( Studi Kasus : PT Mitra Karsa Utama ),” vol. 1, no. 2, pp. 1–6, 2020.
N. Ardiansyah and H. C. Wahyuni, “Analisis Kualitas Produk Dengan Menggunakan Metode FMEA dan Fault Tree Analisys (FTA) Di Exotic UKM Intako,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 2, no. 2, pp. 58–63, 2018, doi: 10.21070/prozima.v2i2.2200.
L. D. Fathimahhayati, M. R. Wardana, and N. A. Gumilar, “Analisis Risiko K3 Dengan Metode HIRARC Pada Industri Tahu Dan Tempe Kelurahan Selili, Samarinda,” J. Rekavasi, vol. 7, no. 1, pp. 62–70, 2019.
S. Darmayani et al., Kesehatan Keselamatan Kerja (K3). Widina Bhakti Persada Bandung, Jawa Barat. 2023.
Direktorat Bina Penyelenggaraan Jasa Konstruksi, Manajemen Risiko K3 Konstruksi, no. January. 2022. [Online]. Available: https://simantu.pu.go.id/epel/edok/9b7dd_Bahan_Tayang_Manajemen_Resiko_K3.pdf
A. Wicaksono and F. Yuamita, “Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 3, pp. 145–154, 2022, doi: 10.55826/tmit.v1iiii.44.
A. A. Syarif, U. N. Harahap, S. J. Sinaga, and M. Z. Siregar, “Analisis Sistem Kesehatan Dan Keselamatan Kerja Di Pt Sumber Sawit Makmur Dengan Metode Hazard Identification Risk Assessment and Risk Control (Hirarc) Dan Fault Tree Analysis (Fta),” J. Al Ulum LPPM Univ. Al Washliyah Medan, vol. 11, no. 1, pp. 7–15, 2023, doi: 10.47662/alulum.v11i1.432.
E. Krisnaningsih, P. Gautama, and M. F. K. Syams, “Usulan Perbaikan Kualitas Dengan Menggunakan Metode Fta Dan Fmea,” J. InTent, vol. 4, no. 1, pp. 41–54, 2021.
R. Hanif, S. H. Rukmi, and S. Susanty, “Perbaikan Kualitas Produk Keraton Luxury DI PT. X dengan Menggunakan Metode Failure Mode and Effect Analysis (FMEA) dan Fault Tree Analysis (FTA),” J. Online Inst. Teknol. Nas., vol. Vol. 03, no. No. 03, pp. 137–147, 2015.
G. L. Pradana, F. Handoko, and H. G. W, “Pengendalian Risiko Kecelakaan Kerja Dengan Pendekatan Hazard Identification , Risk Assesment , and Risk Control ( Hirarc ) ( Studi Kasus Ud . Tohu Srijaya , Batu - Jawa Timur ),” J. Valtech (Jurnal Mhs. Tek. Ind., vol. 5, no. 2, pp. 10–18, 2022.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
