Design A U Manometer with Variations in Tube Diameter and Flow Discharge
Rancang Bangun Manometer U dengan Variasi Diameter Tube dan Debit Aliran
DOI:
https://doi.org/10.21070/ups.688Keywords:
debit, fluida, manometer, tekananAbstract
A manometer is a device used to measure pressure. The manometer is made using a straight pipe with an outer diameter size of 22,26 ,32 mm, with a manometer hose measuring 4 ,6,8 mm in diameter,. The fluid that is used is resin. The test was carried out using a flow discharge of 10,15, 20 liters / minute. From the tests obtained the results of the preassure drop and pressure values on each of the pipe diameter sizes. After testing on a simple manonmeter design with fluid, it was able to read the tested pressure of a straight pipe with a diameter of 32 cm with a flow discharge of 20 L / min resulting in the highest pressure value, while the lowest pressure was obtained by a straight pipe with a diamete size of 22 mm tube hose diameter 4mm with a flow discharge of 10 L / min.
Downloads
References
R. Also and P. Gauges, “Types of Manometer What is Manometer ? Types of Manometer Read Also : Pressure Gauges : Types , Working , Applications and Types of Manometer,” Types Manom., pp. 1–7, 2022.
A. Ghurri, “Dasar-Dasar Mekanika Fluida,” Dasar-Dasar Mek. Fluida, p. 1, 2014.
A. Aufa, G. Rubiono, and H. Mujianto, “Pengaruh Rasio Diameter Pipa Terhadap Perubahan Tekanan Pada Bernoulli Theorem Apparatus,” J. Prodi Tek. Mesin Univ. PGRI Banyuwangi, vol. 1, no. 1, pp. 7–11, 2016.
A. Fahruddin and M. Mulyadi, “Rancang Bangun Alat Uji Head Losses Dengan Variasi Debit Dan Jarak Elbow 90O Untuk Sistem Perpipaan Yang Efisien,” Turbo J. Progr. Stud. Tek. Mesin, vol. 7, no. 1, pp. 32–35, 2018.
Romney & Steinbart, “Sistem perpipaan,” J. Chem. Inf. Model., vol. 53, no. 9, pp. 8–24, 2018.
E. Fernando and A. Fahruddin, “Rancang Bangun Manometer Untuk Alat Ukur HeadLosses Pad uji Perpipaan,” Indones. J. Innov. Stud., vol. 15, pp. 1–13, 2021.
S. Anis and Karnowo, “Dasar Pompa,” Buku Ajar, pp. 1–62, 2008.
D. Listyadi and C. Ghozali, “Karakteristik Aliran Fluida pada Lengkungan S ( Dua Elbow 90 ° ) dengan Variasi Jarak antara Elbow dan Arah Keluaran,” J. Kaji. Ilm. dan Teknol. Tek. Mesin. Univ. Jember, vol. 01, no. 01, pp. 51–56, 2016.
S. S. Wibowo, K. Suharno, and S. Widodo, “Analisis Debit Fluida Pada Pipa Elbow 90° Dengan Variasi Diameter Pipa,” J. Mech. Eng., vol. 1, no. 1, pp. 48–54, 2017.
A. Rischiardi and J. Skrip, “Achmad_Rischiardi_Jurnal_Skrip si.pdf,” 2022.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
