Wrinkle Test Analysis of the Front of the Shoe Reviewed from the Oven and Steam Temperature
Analisa Uji Kerut Bagian Depan Sepatu Ditinjau dari Oven dan Temperatur Steam
DOI:
https://doi.org/10.21070/ups.6857Keywords:
wrinkle, oven, heaterAbstract
Wrinkles are folds that appear on the surface of a component during shoe wear. Based on the observations that have been made, there are defects that occur during the shoe upper assembly process, namely wrinkle defects on the toe cap during the toe last process. Problems arise due to several factors so improvements have been made to the toe to reduce wrinkles which have been implemented by the company. Suggestions for repairing shoes in the toe cap section include several methods that can be used to repair wrinkle defects in the toe cap section of the shoe, used by reheating the toe cap section then repairing it again to perfect the shape of the toe cap section of the shoe, and also disassembling it and then pulling it out. return with the toe last machine if there are too many wrinkles on the toe cap.
Downloads
References
Y. Alfina, “sepatu,” p. 57, 2020.
W. Widari, R. Rambat, and S. Suparti, “Pembuatan kulit atasan sepatu bebas krom,” Maj. Kulit, Karet, dan Plast., vol. 29, no. 2, p. 99, 2013, doi: 10.20543/mkkp.v29i2.197.
H. N. Firmansyah, A. B. Anggoro, and E. Safriana, “Kajian Awal Material Pembuat Toe Cap (Safety Shoes) menggunakan Metode Elemen Hingga,” J. Rekayasa Mesin, vol. 16, no. 3, p. 379, 2021, doi: 10.32497/jrm.v16i3.2955.
P. X. Sepatu Menggunakan Fmea dan Studi Waktu Di Pt, N. Erni, and A. Ni Luh, “Usulan Penurunan Tingkat Cacat pada Area USULAN PENURUNAN TINGKAT CACAT PADA AREA PERAKITAN SEPATU MENGGUNAKAN FMEA DAN STUDI WAKTU DI PT. X,” J. Inovisi TM, vol. 12, p. 96, 2016.
P. Studi et al., “PERBAIKAN KUALITAS SEPATU DENGAN METODE FIVE WHYS ANALYSIS DAN FAILURE MODE AND EFFECT ANALYSIS ( FMEA ) DI PT PRIMARINDO ASIA INFRASTRUCTURE TBK.”
M. Asfan, “Majalah Kulit Politeknik ATK Yogyakarta, Vol. 19, Edisi 2 (2020),” vol. 19, no. 2, pp. 44–62, 2020.
R. S. Murti, H. B. Susanto, and A. D. Pratiwi, “Penerapan sistem penyamakan kombinasi krom pada kulit ikan kakap merah (Lutjanus sp.) untuk bahan kulit atasan sepatu wanita,” Maj. Kulit, Karet, dan Plast., vol. 36, no. 2, p. 45, 2020, doi: 10.20543/mkkp.v36i2.6215.
B. Sepatu, “Merupakan bagian alas atau bawah dari sepatu atau disebut juga dengan,” 2008.
U. F. Bittari and Y. Widharto, “KUALITAS DAN MEMINIMALISIR AKTIVITAS REPAIR PRODUK SEPATU PADA DEPARTEMEN ASSEMBLY ( Studi Kasus : PT Pelita Tomangmas ) Abstrak,” 2021.
“154955-ID-penelitian-pemanfaatan-lateks-alam-iradi.pdf.” .
A. Wicaksana and T. Rachman, “済無No Title No Title No Title,” Angew. Chemie Int. Ed. 6(11), 951–952., vol. 3, no. 1, pp. 10–27, 2018, [Online]. Available: https://medium.com/@arifwicaksanaa/pengertian-use-case-a7e576e1b6bf.
N. M. Dewantari, A. S. Mariawati, R. N. Alamsyah, A. Umyati, L. Herlina, and A. Sonda, “Analisis Potensi Bahaya pada PLTU Banten 2 Menggunakan Metode Job Safety Analysis (JSA),” J. Syst. Eng. Manag., vol. 03, no. 01, pp. 40–44, 2024, [Online]. Available: http://dx.doi.org/10.62870/joseam.vxix.24948.
D. Wulandari, Y. Erwanto, U. G. Mada, Y. Pranoto, and U. G. Mada, “Article • April 2022,” no. April, 2022.
Candra Setia Bakti dan Moh Esa Lauhmahfudz, “Penerapan Metode Six Sigma Dan Perbaikan Kerja Pada Pengendalian Kualitas Sepatu CV.CIR,” CIR J. STT YUPPENTEK, vol. 9, no. 1, pp. 49–57, 2018.
R. Sri, P. E. Yuliana, and K. Kelvin, “Penerapan Metode Six Sigma Untuk Analisis Pengendalian Kualitas Produk Sepatu pada Industri Sepatu di Sidoarjo,” J. Tek. Ind., vol. 25, no. 01, pp. 27–37, 2022.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
