Design and Build a Tread Width Measuring and Monitoring System Based on Google Sheets
Rancang Bangun Sistem Pengukuran dan Pemantauan Lebar Tread Berbasis Google Sheets
DOI:
https://doi.org/10.21070/ups.6819Keywords:
Tread width measurement, VL53L0X sensor, real-time data monitoringAbstract
Automatic measurement with high accuracy is increasingly needed in industry to improve efficiency and product quality. This study aims to design an automatic system for measuring motorcycle tire tread width using the VL53L0X sensor, Arduino Uno microcontroller, and ESP8266 module. This study uses an observational and quantitative approach. This tool displays the measurement results on an I2C LCD and sends data in real-time to Google Sheets via serial communication between Arduino Uno and ESP8266. Tests show that the sensor measurements are quite accurate, with results mostly within acceptable limits, achieving an accuracy level of between 95% and 100%. Data transmission to Google Sheets also runs efficiently, ensuring consistent real-time monitoring. Compared to manual measurements using a roll meter, this system provides better accuracy and efficiency, especially in a production environment with various tread sizes.
Downloads
References
O. SESA and S. BUYUNG, “ANALISIS PENGARUH BEBAN TERHADAP TINGKAT KEAUSAN BAN SEPEDA MOTOR PADA JALAN RIGIT/BETON,” Jurnal Voering, vol. 5, no. 2, pp. 48–54, 2020.
A. Sunanto et al., “ANALISIS CACAT PRODUK BAN VULKANISIR JENIS TRUK DAN BUS PADA CV. SIGMA JAYA SURAKARTA.”
E. Kusuma Laksanawati and B. Akbar Yulianto, “PRODUKSI SIDEWALL METODEEXTRUDING PADA BAN TRUK, MASALAH DAN SOLUSINYA PT. GAJAH TUNGGAL, TBK,” Jurnal Teknik, vol. 11, no. 1, pp. 53–61, Mar. 2022.
E. Sujiwo, “Application of a Non-Contact Laser in Profile Measurement,” ACMIT, 2018.
I. Hanafi, F. Hunaini, and D. Siswanto, “Monitoring And Control System Of Industrial Electric Motors Using The Internet Of Things Sistem Monitoring Dan Kontrol Motor Listrik Industri Menggunakan Internet Of Things (Iot),” Journal of Electrical and Electronic Engineering-UMSIDA, vol. 7, no. 1, 2023, doi: 10.21070/jeeeu.v7i1.
M. W. Magister, A. Pendidikan, U. Kristen, and S. Wacana, “Pendekatan Penelitian Pendidikan: Metode Penelitian Kualitatif, Metode Penelitian Kuantitatif dan Metode Penelitian Kombinasi (Mixed Method)”.
A. Fadhillah and A. Wisaksono, “Design and Construction of Water Heater with Induction Method with Arduino Uno Monitoring Rancang Bangun Pemanas Air Dengan Metode Induksi Dengan Monitoring Arduino Uno,” Jun. 2022.
P. Son Maria and dan Elva Susianti, “Uji Kinerja Surface Scanner 3D Menggunakan Sensor VL53L0X dan Mikrokontroler ATMEGA8535,” 2019.
R. F. Ashari et al., “Desember 2022 Seminar Nasional & Call Paper Fakultas Sains dan Teknologi (SENASAINS 5 th,” Dec. 2022.
C. D. Setyawan and A. Wisaksono, “Body Posture Position Alarm Prototype Based on NodeMCU ESP8266,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 5, no. 4, pp. 614–622, 2023, doi: 10.12928/biste.v5i4.9543.
V. A. Kusuma, M. I. A. Putra, and S. S. Suprapto, “Sistem Monitoring Stok dan Penjualan Minuman pada Vending Machine berbasis Internet of Things (IoT) Menggunakan Google Sheets dan Kodular,” Jurnal Sistim Informasi dan Teknologi, pp. 94–98, Aug. 2022, doi: 10.37034/jsisfotek.v4i3.136.
A. Hendra Saptadi and A. Solichan, “PEREKAMAN DATA SENSOR KE GOOGLE SHEETS MENGGUNAKAN SISTEM MIKROPENGENDALI ATMEGA16A DAN APLIKASI SERVER,” Media Elektrika, vol. 9, no. 2, 2016, [Online]. Available: http://temboo.com
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
