Designing an Ornamental Fish Care Monitoring Tool Based on the Internet of Things (IOT)
Rancang Bangun Alat Monitoring Grooming pada Ikan Hias Berbasis Internet of Things (IOT)
DOI:
https://doi.org/10.21070/ups.6672Keywords:
NodeMCU ESP8266, TDS, Temperature, Waterflow, Feeding, Fish, Internet of Things (IoT)Abstract
It is essential to groom ornamental fish in order to acquire fish of the highest caliber and number. Given the current state of technological breakthroughs, it is anticipated that fish aficionados will receive the best results when technology is used to assist the grooming process. It is projected that the grooming process will be more productive when instruments capable of monitoring water quality parameters are used. The temperature, TDS, and water flow sensors' data will be transmitted over this Internet of Things device and sent to a spreadsheet. Additionally, this system features a servo that is automatically opened and closed by feed, and it is timed by an RTC sensor. It also runs a relay module that regulates the DC fan and lights.
Downloads
References
R. RISMAWATI, TEKNIK BUDIDAYA IKAN HIAS, EDISI PERT. Yogyakarta: DIVA PRESS, 2021.
Z. Zuriati, A. R. Supriyatna, and O. Arifin, “Design and Development of Feeding Automation System and Water Quality Monitoring on Freshwater Fish Cultivation,” IOP Conf. Ser. Earth Environ. Sci., vol. 1012, no. 1, 2021, doi: 10.1088/1755-1315/1012/1/012077.
N. Tiffany, Nandhika Darwin, Dede Furqon Nurjaman, Muhammad Reza Hidayat, and Naftalin Winanti, “Sistem Monitoring Kualitas Air pada Akuarium Budidaya Ternak Ikan Guppy Menggunakan Mikrokontroler Berbasis IoT,” J. Tek. Media Pengemb. Ilmu dan Apl. Tek., vol. 21, no. 2, pp. 144–157, 2023, doi: 10.55893/jt.vol21no2.466.
M. R. Satriawan, G. Priyandoko, and S. Setiawidayat, “Monitoring pH Dan Suhu Air Pada Budidaya Ikan Mas Koki Berbasis IoT,” Jambura J. Electr. Electron. Eng., vol. 5, no. 1, pp. 12–17, 2023, doi: 10.37905/jjeee.v5i1.16083.
S. Indriyanto, F. T. Syifa, and H. A. Permana, “Sistem Monitoring Suhu Air pada Kolam Benih Ikan Koi Berbasis Internet of Things,” TELKA - Telekomun. Elektron. Komputasi dan Kontrol, vol. 6, no. 1, pp. 10–19, 2020, doi: 10.15575/telka.v6n1.10-19.
I. Asma, N. Muchlisin, Z.A. dan Hasri, “Pertumbuhan dan Kelangsungan Hidup Benih Ikan,” vol. 1, no. April, pp. 1–11, 2016.
A. Amarudin, D. A. Saputra, and R. Rubiyah, “Rancang Bangun Alat Pemberi Pakan Ikan Menggunakan Mikrokontroler,” J. Ilm. Mhs. Kendali dan List., vol. 1, no. 1, pp. 7–13, 2020, doi: 10.33365/jimel.v1i1.231.
R. R. Putra, H. Hamdani, S. Aryza, and N. A. Manik, “Sistem Penjadwalan Bel Sekolah Otomatis Berbasis RTC Menggunakan Mikrokontroler,” J. Media Inform. Budidarma, vol. 4, no. 2, p. 386, 2020, doi: 10.30865/mib.v4i2.1957.
S. D. Ayuni, S. Syahrorini, and J. Jamaaluddin, “Lapindo Embankment Security Monitoring System Based on IoT,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 6, no. 1, pp. 40–48, 2021, doi: 10.21831/elinvo.v6i1.40429.
H. Himawan and M. Yanu F, “Pengembangan Alat Pemberi Makan Ikan Otomatis Menggunakan Arduino Terintegrasi Berbasis Iot,” Telematika, vol. 15, no. 2, p. 87, 2018, doi: 10.31315/telematika.v15i2.3122.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
