Effect of Variation of Impeller Length in Household Water Pumps on Discharge and Pressure
Pengaruh Variasi Panjang Impeller pada Pompa Air Rumah Tangga Terhadap Debit dan Tekanan
DOI:
https://doi.org/10.21070/ups.655Keywords:
Water Pump, Impeller Design, Flowrate PressureAbstract
Pump is a device used to increase pressure to flow fluid or something in the form of liquid from one place to another or from a low surface to a high surface. High pressure is exerted through the medium by imparting energy to the displaced fluid, converting mechanical energy to kinetic energy. The mechanical energy of the pump is used to increase the speed, pressure or height of the fluid. Therefore making a pump prototype by making different impeller lengths, whether it can affect the resulting flow discharge output or not. So that in the future we can conduct experiments to make an impeller which is more effective in producing a larger water discharge. The aim of this research is to find out which discharge and pressure are more effective when changing/modifying the impeller. From the type of research method , this research includes experimental research .
Downloads
References
R. Candra, “Perancangan Pompa Sentrifugal Dan Diameter Luar Impeller Untuk Kebutuhan Air Kapasitas 60 Lpm Di Gedung F Dan D Universitas Muhammadiyah Tangerang,” J. Tek. Univ. Muhammadiyah Tangerang, vol. 7, no. 1, pp. 15–25, 2018.
E. P. Putro, E. Widodo, A. Fahruddin, and Iswanto, “Analisis head pompa sentrifugal pada rangkaian seri dan paralel,” Media Mesin Maj. Tek. Mesin, vol. 21, no. 2, pp. 46–56, 2020.
P. Nikosai and I. S. Arief, “Optimasi Desain Impeller Pompa Sentrifugal Menggunakan Pendekatan CFD,” J. Sains dan Seni ITS, vol. 4, no. 2, pp. 6–11, 2015.
A. Nasution, M. Nasution, and M. Rohim, “Analisa Pengaruh Sudut Masuk Terhadap Jumlah Sudu Pada Sudu Pompa Sentrifugal,” Piston, vol. 4, no. 2, pp. 51–58, 2020.
Kennie A. Lempoy, “Desain Bentuk Sudut Sudut Arah Radial Pada Pompa Sentrifugal,” Tekno, vol. 8, no. 53, pp. 13–17, 2010.
W. M. Rumaherang, “Perhitungan aliran dan peramalan karakteristik pompa sentrifugal bertingkat dengan penggunaan CAD blade’s system,” J. Ilm. Tek. Mesin CAKRAM, vol. 2, no. 2, pp. 69–76, 2008
Yurianto, “Karakteristik pompa sentrifugal dengan sudu impeller streamline,” Rotasi, vol. 3, no. 2, pp. 32– 35, 2001.
A. Fahruddin and Mulyadi, “Rancang Bangun Alat Uji Head Losses dengan Variasi Debit dan Jarak Elbow 90˚ Untuk Sistem Perpipaan yang Efisien,” J. Turbo, vol. 7, no. 1, pp. 32–35, 2018
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
