Preprint has been published in a journal as an article
Preprint / Version 1

Analysis of the Effect of Air Inlet Channels (Burners) on Combustion Temperature in a Stove Using Used Cooking Oil and Waste Oil


Analisa Pengaruh Saluran Udara Masuk (Burner) Terhadap Temperatur Pembakaran Pada Kompor Berbahan Minyak Jelantah Dan Oli Bekas

##article.authors##

  • Refandi Anwar Pratama Universitas Muhammadiyah Sidoarjo
  • Iswanto Iswanto

DOI:

https://doi.org/10.21070/ups.6504

Keywords:

Used Cooking Oil, Used Oil, Burner Variations, Maximum Burning Temperature

Abstract

In the period 2015 to 2020, Indonesia experienced an increase in the consumption of used cooking oil and used oil by 2.32% per year, along with consumptive lifestyles and the sustainability of culinary culture. These used cooking oils can generate harmful free radicals that have the potential to cause health problems such as cancer and neurological disorders. The utilization of used cooking oil and used oil as alternative fuels can reduce waste and environmental impacts, but these uses are still limited and less efficient. This research method evaluates the stove fueled by used cooking oil and used oil with burner variations to determine its effect on flame temperature. The results showed that the maximum combustion temperature of used cooking oil reached 531.62°C at a burner hole variation of 20, while used oil had different temperature ranges between 518.37°C

Downloads

Download data is not yet available.

References

K. Sekaran and G. Semarang, “PENGOLAHAN MINYAK GORENG BEKAS (JELANTAH) SEBAGAI PENGGANTI BAHAN BAKAR MINYAK TANAH (BIOFUEL) BAGI PEDAGANG GORENGAN DI SEKITAR FMIPAUNNES Natalia Erna S, Wasi Sakti Wiwit P”.

Z. Akmal et al., “Untuk Pemicu Berupa Bensin Atau Minyak Tanah , Kemudian Bahan Bakar Di Dalam Tangki Yang,” vol. 7, no. 1, pp. 25–28, 2023.

A. Kusnadi, R. Djafar, and M. Mustofa, “Pemanfaatan Oli Bekas Sebagai Bahan Bakar Alternatif Kompor Yang Ramah Lingkungan,” J. Teknol. Pertan. Gorontalo, vol. 5, no. 2, pp. 49–55, 2020, doi: 10.30869/jtpg.v5i2.681.

A. Bakhori, “Perbaikan Metode Pengelasan Smaw (Shield Metal Arc Welding) Pada Industri Kecil Di Kota Medan,” Bul. Utama Tek., vol. 13, no. 1, pp. 14–21, 2017.

G. W. Ramadhan and B. Basyirun, “Pengaruh Tekanan Udara Terhadap Temperatur Pembakaran Oli Bekas pada Kompor,” J. Din. Vokasional Tek. Mesin, vol. 5, no. 2, pp. 163–168, 2020, doi: 10.21831/dinamika.v5i2.34804.

M. A. Aljarwi, D. Pangga, and S. Ahzan, “Uji Laju Pembakaran Dan Nilai Kalor Briket Wafer Sekam Padi Dengan Variasi Tekanan,” ORBITA J. Kajian, Inov. dan Apl. Pendidik. Fis., vol. 6, no. 2, p. 200, 2020, doi: 10.31764/orbita.v6i2.2645.

D. Pangga and S. Ahzan, “UJI LAJU PEMBAKARAN DAN NILAI KALOR BRIKET WAFER SEKAM PADI,” vol. 6, no. November, pp. 200–206, 2020.

K. Cisalak and J. Barat, “Penyuluhan dan Pelatihan Pemanfaatan Minyak Jelantah menjadi,” vol. 2, no. 2, pp. 142–148, 2022.

A. Pratama, Y. W. Atmojo, and G. W. Ramadhan, “Rancang Bangun Kompor ( Burner ) Berbahan Bakar Oli Bekas,” vol. 19, no. September, pp. 95–103, 2020.

I. Febriana, Y. F. Saputra, and N. N. Alfarabi, “Uji Kinerja Prototype Kompor Oli Bekas Ditinjau Dari Komposisi Oli Terhadap Laju Alir Bahan Bakar,” vol. 9, pp. 62–68, 2024.

A. S. Nugroho, A. T. Rahayu, and N. A. Rubiandana, “STUDI EKSPERIMENTAL PENGARUH DIAMETER NOZZLE TERHADAP PEMBAKARAN BAHAN BAKAR Experimental Study of The Effect of Nozzle Diameter on Fuel Combustion,” vol. 2, no. December, pp. 21–26, 2021.

N. B. P. Mafruddin1*, Kemas Ridhuan2, Eko Budiyanto3, Kurniawan 4, Muhammad Atiq Mubarak5, “Pengaruh laju aliran udara dan lubang uap air terhadap kinerja kompor dengan bahan bakar oli bekas,” vol. 11, 2022.

A. R. Tuzzahra, R. F. Iskandar, F. T. Elektro, U. Telkom, and T. U. D. Gasifier, “PENGARUH UKURAN LUBANG UDARA PADA TUNGKU PEMBAKARAN SERTA GASIFIKASI UPDRAFT DENGAN OPTIMASI BAHAN BAKAR KAYU SENGON THE INFLUENCE OF SIZE OF AIR HOLES AT GASIFIER WITH AIR FLOW VELOCITY VARIATIONS AGAINST BIOMASS SENGON WOOD FUEL GASIFICATION,” vol. 7, no. 1, pp. 1237–1244, 2020.

I. Tazi, “Uji kalor bakar bahan bakar campuran bioetanol dan minyak goreng bekas,” vol. 3, no. 2, pp. 163–174, 2020.

S. P. Amalia, “Perengkahan Termal ( Thermal Cracking ) Campuran Oli Bekas dan Minyak Jelantah Untuk Menghasilkan Bahan Bakar Minyak Sebagai Bahan Ajar Pada Mata Kuliah Kinetika Kimia,” vol. 2, no. 3, pp. 75–79, 2021, doi: 10.37251/ijoer.v2i3.531.

Posted

2024-08-29