Design and Construction of 3 Phase Electricity Source Control in The Practicum Room for Vocational Students Department of Electric Power Installation Engineering Based on The Siemens Logo
Rancang Bangun Kontrol Sumber Listrik 3 Fasa pada Bilik Praktikum Siswa Smk Jurusan Teknik Instalasi Tenaga Listrik berbasis Siemens Logo
DOI:
https://doi.org/10.21070/ups.5924Keywords:
Siemens LOGO, Raspbery PI, Node REDAbstract
The field of electricity technology is rapidly advancing, particularly in Vocational High Schools' Electrical Power Installation Engineering departments. To address student errors in handling 3-phase electricity and ensure safety, a control system using Siemens Logo and Node RED was developed. This system allows instructors to manage and monitor the 3-phase power source remotely via a web dashboard, preventing unsupervised student activation. Research and Development methods were used to test the system, which successfully detects electrical short circuits and updates the Node RED dashboard. The system also provided average output voltages of 418.3 Volts between phases and 241.6 Volts between phase and neutral, with phase sequence determined by clockwise rotation measurement.
Downloads
References
B. Atdrean and Soeryanto, “IDENTIFIKASI KELAYAKAN FASILITAS BENGKEL PRAKTIK BUBUT DI SMK ANTARTIKA 1 SIDOARJO,” Jurnal Pendidikan Teknik Mesin JPTM, vol. 11, no.02, pp. 232–238, 2022.
A. Ramadhan Putra, Soeprijanto, and M. Subekti, “EVALUASI KELENGKAPAN PERALATAN PRAKTIK INSTALASI TENAGA LISTRIK SMK (Studi Kasus di SMK Taruna Bangsa Bekasi),” Journal of Electrical Vocational Education and Technology, vol. 5, no. 1, pp. 1–5, May 2020, doi: 10.21009/JEVET.0051.01.
P. Alvina, H. Wicaksono, and P. Santoso, “Sistem Keamanan Bangunan Multi Lokasi Berbasis IoT Menggunakan Siemens LOGO! dan Raspberry Pi2,” Seminar Nasional Fortei Regional 7, vol. 2, no. 1, pp. 376–381, Aug. 2019.
A. M. Roziqin, I. Sulistiyowati, S. D. Ayuni, and S. Syahrorini, “Prototype of Power Sharing Automation System in 3 Phase Power Source Based on Internet of Things,” Procedia of Engineering and Life Science, vol. 2, no. 2, Sep. 2022, doi: 10.21070/pels.v2i2.1265.
H. Andrianto and G. I. Saputra, “Smart Home System Berbasis IoT dan SMS,” TELKA, vol. 6, no. 1, pp. 40–48, May 2020.
M. R. Ali, M. A. Falahuddin, and M. E. Susilawati , “Pembuatan Remote Accessable PLC LOGO Siemens dengan Web Server Programming pada Training Unit Sistem Refrigerasi,” Industrial Research Workshop and National Seminar, pp. 75–80, 2021.
A. A. Alsati, A. Abouelfadl, F. S. Alhosarey, S. A. Deraz, and M. El-Shahat Dessouki, “Design and Development of a Low-Cost PLC Trainer Using Siemens Logo for Educational Purposes,” International Journal of Software & Hardware Research in Engineering, vol. 10, no. 6, Jun. 2022, doi: 10.26821/IJSHRE.10.6.2022.100612.
R. P. Pratama, “Sistem Monitoring dan Kendali AC melalui Aplikasi Node-RED,” Jurnal Fokus Elektroda, vol. 07, no. 03, pp. 162–168, 2022.
D. Laksmiati, “MONITORING CUACA PADA ANDROID MENGGUNAKAN NODE-RED, OPENWEATHER DAN SIGNL4,” Jurnal AKRAB JUARA, vol. 06, pp. 142–151, 2021.
S. A. Omidi, M. J. A. Baig, and M. T. Iqbal, “Design and Implementation of Node-Red Based Open-Source SCADA Architecture for a Hybrid Power System,” Energies (Basel), vol. 16, no. 5, p. 2092, Feb. 2023, doi: 10.3390/en16052092.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
