Design of an Arduino Uno Based Cupboard Door Opening and Closing Automation Tool
Desain Alat Otomasi Buka Tutup Pintu Almari Sepatu Berbasis Arduino Uno
DOI:
https://doi.org/10.21070/ups.5800Keywords:
Automatic Cupboard Opening and Closing, Ultrasonic Sensor, Arduino UnoAbstract
As technology develops, effectiveness and efficiency become things that are highly prioritized, so that humans are encouraged to be more creative and innovate in technology in creating tools that are more effective and efficient. This research aims to create an automatic door for shoe as technological development in providing convenience in opening doors effectively and efficiently. The aim of its design is to create an Arduino-based cupboard door opening and closing automation tool model system using an Ultrasonic sensor. This research uses an ultrasonic sensor as a detection component, using a servo motor as a driver and as a component controller using Arduino Uno. There are three steps in designing automatic cupboard opening and closing, including the planning design , the formation design and the programming design stage.
Downloads
References
I. Sulistiyowati and M. I. Muhyiddin, “Disinfectant Spraying Robot to Prevent the Transmission of the Covid-19 Virus Based on the Internet of Things (IoT),” J. Electr. Technol. UMY, vol. 5, no. 2, pp. 61–67, 2021, doi: 10.18196/jet.v5i2.12363.
Iswanto and I. Ahmad, “Second-order integral fuzzy logic control based rocket tracking control,” J. Robot. Control, vol. 2, no. 6, pp. 594–604, 2021, doi: 10.18196/jrc.26142.
R. N. Almajid, “Simulasi Otomatisasi Pintu Dengan Deteksi Suhu Tubuh Berbasis Arduino,” pp. 70–73, 2020.
Y. T. Utami and Y. Rahmanto, “Rancang Bangun Sistem Pintu Parkir Otomatis Berbasis Arduino Dan Rfid,” J. Teknol. dan Sist. Tertanam, vol. 2, no. 2, p. 23, 2021, doi: 10.33365/jtst.v2i2.1331.
F. Khairuddin, P. Studi, T. Industri, F. Teknik, and U. M. Surakarta, “OTOMASI SISTEM PARKIR SEPEDA MOTOR BERBASIS RFID DAN ARDUINO ( Studi Kasus : Tempat Parkir Fakultas Teknik Universitas Muhammadiyah Surakarta ),” 2020.
A. F. Adella, M. F. P. Putra, F. Taufiqurrahman, and A. B. Kaswar, “Pintu otomatis berbasis ultrasonic internet of things,” Media Elektr., vol. 17, no. 3, pp. 1–7, 2020.
I. Termometer and H. Sanitizer, “MITOR : Jurnal Teknik Elektro,” pp. 128–132, 2023, doi: 10.23917/emitor.v22i2.22020.
D. Setiawan, M. P. H, N. Nofriandi, F. Aziz, and F. Hamdi, “Desain Dan Analisis Pintu Otomatis Menggunakan Sensor Ultrasonic Berbasis Arduino Uno,” J. Karya Ilm. Multidisiplin, vol. 2, no. 1, pp. 62–68, 2022, doi: 10.31849/jurkim.v2i1.9074.
M. F. Dirgantara, H. Khusnuliawati, A. Charolina, and S. Huning, “Rancang Bangun Prototype Automatic Door Lock Menggunakan Modul RTC Berbasis Arduino Keyword :,” no. September, pp. 4352–4362, 2023.
H. Humaira and A. Aswardi, “Sistem Garasi Pintar Berbasis Mikrokontroler dan Jaringan Wireless,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. 6, no. 1, p. 252, 2020, doi: 10.24036/jtev.v6i1.107926.
I. Prasetyo, “The Use of Patient-Controlled,” PLS FIP Univ. Negeri Yogyakarta, vol. 6, p. 11, 2012.
N. Raharjo and M. T. J. Putra, “Simulasi Alat Pengendali Otomasi Pintu Gerbang dan Garasi Menggunakan Pemancar Radio RF dan Sensor IR,” J. Elektro, vol. 2, no. 1, 2017, doi: 10.30736/je.v2i1.36.
E. F. Colli et al., “LAMPU PADA SMART CLASS BERBASIS MIKROKONTROLER,” pp. 98–109.
O. R. Arsyad and K. P. Kartika, “Rancang Bangun Alat Pengaman Brankas Menggunakan Sensor Sidik Jari Berbasis Arduino,” JATI (Jurnal Mhs. Tek. Inform., vol. 5, no. 1, pp. 1–6, 2021, doi: 10.36040/jati.v5i1.3285.
S. Aryza, Z. Lubis, and S. A. Lubis, “Penguatan Industri 4 . 0 Berbasiskan Arduino Uno Dan GSM SIM900A DiDalam Pintu Geser,” vol. 5, no. 2, 2020.
A. F. Silvia, E. Haritman, and Y. Muladi, “RANCANG BANGUN AKSES KONTROL PINTU GERBANG BERBASIS ARDUINO DAN ANDROID,” vol. 13, no. 1, pp. 1–10, 2014.
Z. Khalid, S. Achmady, and P. Agustini, “Otomatisasi Sistem Keamanan Kunci Lemari Menggunakan Sensor Sidik Jari Berbasis Arduino Uno Automation of Security Systems for Cabinet Locks Using Arduino Uno Based Fingerprint Sensor,” vol. 1, no. 1, pp. 1–11, 2020.
N. T. Ujianto, R. I. Fitria, D. A. Nawangnugraeni, and H. R. Jannah, “Pintu Air Otomatis Pencegah Rob Berbasis Arduino,” vol. 14, no. 1, 2023.
F. D. Septiawan and E. Sudarmilah, “Rancang Bangun Otomasi Penguncian Pintu Rumah dan Saklar Lampu dengan Android Berbasis Arduino Uno,” vol. 1, no. 2, pp. 59–67, 2019.
D. Setiawan, A. Pranata, P. S. Ramadhan, and A. Azanuddin, “Simulasi Alat Pintu Otomatis Kereta Api Menggunakan Sensor Ultrasonic Berbasis Microcontroller,” J. Sci. Soc. Res., vol. 4, no. 2, p. 147, 2021, doi: 10.54314/jssr.v4i2.550.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
