Design And Construction Of Tools (Tracker) Disassemble the Shock Absorber
Rancang Bangun Alat Bantu (Tracker) Bongkar Pasang Shock Absorber
DOI:
https://doi.org/10.21070/ups.5553Keywords:
design, disassembly tools, shock absorberAbstract
Shock absorber is mechanical device designed reduce shocks caused by kinetic energy, functions reduce vibrations from rough road surfaces and important part suspension heavily loaded trucks. The designing tools (trackers) save time work and reduce risks when working. The design process uses Solidworks professional 2018 software. The tool making process uses AISI 1035 Stell material with 3 stages, namely cutting, drilling and assembly. The results testing design shock absorber installation and disassembly tool fastest removal time was minute 25 seconds with an average time 1 minute 29 seconds and fastest installation was 2 minutes 2 seconds with average time of 2 minutes 6 seconds. The results of spring strength with load of 250 kg, initial spring length of 23 cm and final spring length of 19.5 mm showed constant of 71.42 kg/cm2. The results calculating spring strength shock absorber disassembly tool load of 70 kg, obtained constant of 20 kg/cm2.
Downloads
References
I. G. A. M. Y. Mahaputra, i. G. A. P. R. Agung, and l. Jasa, “Rancang Bangun Sistem Keamanan Sepeda Motor Dengan Gps Tracker Berbasis Mikrokontroler Dan Aplikasi Android,” majalah ilmiah teknologi elektro, vol. 18, no. 3, p. 361, dec. 2019, doi: 10.24843/mite.2019.v18i03.p09.
M. B. Rabbani, “Faktor Internal Dan Eksternal Yang Mempengaruhi Produktivitas Tenaga Kerja (Studi Kasus Pada Perusahaan Walang Emas Malang) jurnal ilmiah disusun oleh,” 2019.
J. G. Armfirst And A.’ Rasy Fahruddin, “Design Of Hydraulic Puller For Releasing Crankshaft Bearings On Motorcycle,” rekayasa energi manufaktur) jurnal |, vol. 4, no. 2, 2019, doi: 10.21070/rem.v4i2.809.
P. Ferdianto and s. T. Iskandar, “Rancang Bangun Alat Pelepas Pegas Shockbreaker Dengan Tenaga Hidrolik,” 2020.
A. Al aziz, p. Studi sarjana terapan manufaktur lanjutan, and j. Teknik mesin politeknik negeri jakarta kampus baru, “Perancangan Special Service Tool Coil Spring Compression Electric Untuk Shock Macpherson Strut Menggunakan Metode Eksperimen,” 2023
M. Hanif dhiaulhaq and r. Febritasari, “Analisis Defleksi Dan Tegangan Pada Shock Absorber Roda Belakang Tipe Dualshock Dan Monoshock Pada Motor Yamaha Aerox 155,” 2021.
U. Kannengeisser and j. A. Gero, “A Comparison Between Pahl And Beitz’ Systematic Approach And The Design Behaviour Of Mechanical Engineering Students,” 2019.[online].Available: http://bmedesign.engr.wisc.edu/course/syllabus/.
S. N. Razali1, “Penerapan Alat Pelepas Pegas Shock Absorber Sistem Hidrolik Semi Otomatis Untuk Meningkatkan Perekonomian Usaha Kecil Perbengkelan Masyarakat Desa Jangkang Kecamatan Bantan Bengkalis,” tanjak (jurnal pengabdian kepada masyarakat), 2023.
Muhammad Irvan, “Fase Pengembangan Konsep Produk Dalam Kegiatan Perancangan Dan Pengembangan Produk,” jurnal ilmiah faktor exacta, 2019.
A. Al aziz, p. Studi sarjana terapan manufaktur lanjutan, and j. Teknik mesin politeknik negeri jakarta kampus baru, “Perancangan Special Service Tool Coil Spring Compression Electric Untuk Shock Macpherson Strut Menggunakan Metode Eksperimen,” 2023..
I. Apriana and a. Ramdan, Aplikasi Metode Perancangan Pahl-Beitz Pada Perancangan Lini Produksi. 2020.
W. Simbolon, ) ridho, and e. H. Gultom, “Rancang Bangun Alat Bantu Service Shock Absorber Tipe Coil Spring Menggunkan Dongkrak Hidrolik Otomatis Dengan Kapasitas 3,5 Ton,” 2021
Rifki yoga kusuma, “Rancang Bangun Alat Bantu Service Shock Absorber Menggunakan Dongkrak Hidrolik Otomatis Skripsi,” 2021
P. Ferdianto and s. T. Iskandar, “Rancang Bangun Alat Pelepas Pegas Shockbreaker Dengan Tenaga Hidrolik,” 2020
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
