Preprint has been published in a journal as an article
Preprint / Version 1

The Effect Of Various Types Of Concrete Binders On The Mechanical Strength Of Concrete: Analysis Of Mechanical Properties In The Context Of The Use Of Different Binders


Pengaruh Variasi Jenis Pengikat Beton Terhadap Kekuatan Mekanis Beton: Analisis Sifat Mekanis Dalam Konteks Penggunaan Pengikat Berbeda

##article.authors##

DOI:

https://doi.org/10.21070/ups.5479

Keywords:

Variations in Concrete Binder Types, Mechanical Strength of Concrete, Mechanical Properties, Use of Different Fasteners

Abstract

Research The aim of this research is to determine the comparison of compressive strengths of each cement, determine the composition that is effective and can meet the desired targets, determine the physical properties of good and poor concrete. This research method was carried out by testing in the laboratory according to data from literature studies, Indonesian Standards. The samples are made from concrete slabs by comparing the composition of the mixture that has been determined. The number of test pieces made of 6 pieces of cylindrical shape with a diameter of 15 cm and a height of 30 cm. The results of the research are: 1. The results of the test results for the strength of the bietoin binder are different for each result, even though they use the same dosage, 2. The white mieren sieve is more stable than the other 2 siemien. 

Downloads

Download data is not yet available.

References

T. Mulyono, Teknologi Beton. Andi, 2004.

N. S. Sahay, “Pengaruh Penambahan Kawat Bendrat Pada Campuran Beton Terhadap Kuat Tekan Beton.,” Jurnal Sipil , vol. 5, no. 2, pp. 35–50, 2010.

SNI, Metode Pengujian Berat Isi Dan Rongga Udara Dalam Agregat,. 1998.

SNI, Cara Uji Slump Beton,. 2008.

SNI, Metode Pengujian Kuat Tekan Beton Dengan Benda Uji Silinder Yang Dicetak. 2011.

Dika Dwi Astanti and Priyanto Saelan, “Studi Mengenai Hubungan Antara Kelecakan Dengan Faktor AirSemen Dan Kadar Air Dalam Campuran Beton"Cara Sni Pada Kondisi Agregat Kering Udara.Jurusan Teknik Sipil ,” ,Institut Teknologi National Bandung, vol. 4, no. 5, p. 53, 2018.

Mulyati Aprini Maramis, “Pengaruh Variasi Jumlah Semen Dengan Faktor Air Yang Sama Terhadap Kuat Tekan Beton,"Fakultas Teknk Sipil Dan Perencanaan ,” Institut Teknologi Padang, vol. 12, no. 1, 2012.

Widodo, Aris Dan Basith Muhaamad Abdil, and Basith Muhaamad Abdil, “Analisis Kuat Tekan Beton Dengan Penambahan Sierat Rooving Pada Beton Non Pasir,” Jurnal Sipil Dan Perencanaan, vol. 19, no. 2, pp. 155–120, 2017.

Sari Rosie Arizki Intan, Wallah Steenie E, and Windah Reky S, “Pengaruh Jumlah Semen Dan Fas Terhadap Kuat Tekan Beton Dengan Agregat Yang Berasal Dari Sungai,” vol. 9, no. 1, 2015.

Widhiarto Herry and Sujatmiko B, “Analisis Campuran Beton Berpori Diengan Agregat Bergradasi Terpisah Ditinjau Terhadap Mutu Dan Biaya,” vol. 5, no. 2, p. 7, 2012.

Ximenes, H. A. M., and A. Suraji, “Pengaruh Komposisi Campuran Beton Dan Jenis Semen Terhadap Kelecakan Dan Kuat Tekan Beton. ,” Ximenes, A. M., Halim, A., & Suraji, A. (2021). Pengaruh Komposisi Campuran BetThie 4th Conference On Innovation And Application Of Science And Technology 2021., 2021.

Firnanda, “Kuat Tekan Beton Dan Waktu Ikat Semen Portland Komposit (Pcc)”,” Jurnal Online Mahasiswa Bidang Teknik Dan Sains, vol. 1, no. 1, pp. 1–11, 2014.

Sudirman and Hadi Santoso., “Pengujian kuat tekan briket biomassa berbahan dasar arang dari tempurung kelapa sebagai bahan bakar alternatif.",” Jurnal Pendidikan Teknik Mesin , vol. 8, no. 2, pp. 101–108, 2021.

I. A. Ahmad, Nur Anny Suryaningsih Taufieq, and Abdul Hamid Aras, “Analisis pengaruh temperatur terhadap kuat tekan beton,” Jurnal Teknik Sipil ITB, vol. 16, no. 2, pp. 63–70, 2009.

Nurzal and Zepriady Zakir, “Pengaruh Komposisi Fly Ash Terhadap Kuat Tekan Pada Pembuatan Paving Block,” Jurnal Teknik Mesin , vol. 4, no. 1, 2014.

Posted

2024-08-01